SPECIAL REPAIR TO BLDG NO. P - 44 (MI ROOM) IN TECH AREA TAKU CPE AREA ITARSI UNDER GE (I) (P) FY JABALPUR

Amount

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and labour for joint free Non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.11 Sqm but not exce 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with including screed bed in CM 1:6, 15mm thick for laying floor tiles, etc. complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles 450x300x7mm thick on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick cement plaster with cement mortar 1:4 complete all as specified and directed.

Excavating over areas n exc 1.5m deep and getting out in soft/loose soil of below floor complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed.

Removing soil exc. 1.50 km but n exc. 5 km and depositing where directed at a level not exceeding 1.5 metre above the starting point, including spreading complete all as specified & directed.

Returning filling including spreading levelling, watering and well ramming in layers n. exc 25mm in any type of soil complete all as specified & directed.

Material and labour for Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified & directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. including removal of debris complete all as specified and as directed.

Material and labour for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for providing cement concrete type D-2,1:4:8 type D-2 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L Demolition of Cement concrete (Reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Material and labour for Reinforced cement concrete (nominal mix) type B-1,1:2:4 (using 20mm graded aggregate) in foundations, including rafts,footings, foundation beams,plinth beams; bases for columns, etc complete all as specified and directed.

Material and labour for Reinforced cement concrete (nominal mix) type B-1 1:2:4 (using 20mm graded aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for Reinforced cement concrete (nominal mix) type B-1 1:2:4 (using 20mm graded aggregate) in Lintel Beams, Roof beams cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

Material and labour for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to sides of Rough finished surfaces of concrete as flat for foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical complete all as specified and as directed.

Formwork to sides of Rough finished surfaces of concrete as flat for pillars, posts, struts, piers, columns, lintel beams, roof beams and stanchions complete all as specified and as directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including surfce finishes of any type like kota stone/terrazo etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in quoted rate for concrete in plinth protection.

Material and labour for 75 mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for Forming jambs etc, to opening (to foregoing items) including cutting, toothing and properly bonding into old work with cement mortar 1:4, also facing, jointing and pointing to match existing work complete all as specified and as directed.

Material and labour for 25mm thick cement concrete (1:2:4 type B-0 (using 12.5 mm graded stone Aggregate) as in sub base of floor finish even and rough to receive further floor finishes completed all as specified and directed.

Material and labour for any colour Vitrified tiles 10mm thick (square/ rectangular) polished, area of each tiles n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of floor tiles in CM (1:6) completed all as specified and directed.

All as per item No. 25 here-in-before but on vertical surface such as skirting /dado of laid over and including 10mm thick rendring in CM 1:4 complete all as specified and directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, arapets and railings upto 60 cm in height, copings, kneelers, apex stones,slab bed plates, kerbs not provided, water troughs and the like including necessary formwork and fair finishing the exposed surfaces of concrete, weathering, slightly rounded or chamfered angles and throating as directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces mixing with water proofing compound as per manufacturer instruction (Water proofing compound paid for seperately)of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement completed all as specified and directed.

Material and labour for rendering 15 mm thick on faces other than fair of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement completed all as specified and directed.

Material and labour for 10mm thick rendering in cement mortar CM 1:3 to ceiling and similar work finished the surface even and smooth without using extra cement complete all as specified.

Supply only intregal water proofing compound (ISI mark) completed all as specified and directed.

S&F 50mm High density polythylene pipes (HDPE) of pressure rating 6 Kgf/cm2 fixed to walls, complete all as specified and as directed.

Supply and fix for 25mm dia steel powder quoted fancy type curtain rail complete all as specified and directed.

Supply and fix steel powder/brass quoted brackets, finials (Latoo), for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm including builders hardware and removing from site complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and Refixing of shutters in same opening complete all as specified and as directed.

Supply and fixing aluminium powder coated frame for doors, partition, windows, ventilators with one or more rebated including necessary jointing cleats, rubber beading, aluminium powder coated snap beading, screws, aluminium powder coated Flat for fixing etc. complete all as specified and as directed.

Supply and fixing aluminium powder coated glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 16 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring, both side opeining without sash bars but including 5mm thick plain/tinted / heat reflecting glass pan with and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortice lock) and aluminuium anodised tower bolt 200 mm long and hydraulic floor door spring complete all as specified and as directed.

Supply and fixing aluminium powder coated aluminium window having three track with aluminium section 92 mm X 31.75 mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40 mm X 18 mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rmt mounted on bearing to slide on tracks plain anodized in approved shade including fixing of 5mm thick sun/heat reflacted glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner Etc. complete all as specified and as directed.( Min. thickness of powder coating 50 micron)

Supply and fix aluminium (die cast body) door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

Supply and fixing for rolled mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Dismarting the existing ceiling board of any description fixed in any position with nails and S&F in position suspended false celling system using E Grid suspended celling Grid system of M/S Everest industries Ltd or India Gypsum. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the roof with butter fly clips complete all as specified and directed.

Dismantling existing asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings and S&F pre - painted galvatume aluminum zinc corrugated steel based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping serews complete all as specified and directed.

M&L for providing cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, post/Kerb/parafits etc complete all as specified and as directed.

Dismantling unframed timber scantlings 40 sqcm and over in section any position complete all as specified and as directed.

S&F steel work in structural work as in truss, purling, or gates of angle or other section with gusset plates, rails, braces etc Fe 290 (Gde E - 165) quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening complete all as specified and as directed.

Supply and fix 30mm thick factory made solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, suppling and fining in frame at site complete all as specified and as directed.

Supply and fix 30mm thick factory made solid HDF Moulded Door with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 5mm thick Moulded masonite sheet on the one face and and 5mm plain colour masonit sheet on back face, suppling and fining in frame at site complete all as specified and as directed.

S&F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR (Part-I) clause 8.20 (a), open rebated and prepared to receive glass or gauge (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc complete all as specified and as directed.

Supply and fix 4mm thick, figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sqm in each pane complete all as specified and as directed.

S &F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing for pressed steel frame for doors and windows with two rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

Supply and fixing for pressed steel frame for doors and windows with one rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

Material and labour for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in back filling of pressed steel frame etc complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed.

Supply and fix 100 mm size Butt hinges, cold rolled mild steel, medium weight fixed with cadmium plated screws complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fixing in repairs chromium plated long body bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Material and labour for granite (of any type) 20 mm thick machine cut, bedded, jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

Labour only for rounding to edges of granite slabs one edge, such as in cooking platform and other similar work complete all as specified and as directed.

Material and labour for 300x300 x25 mm thick PCC designer Pre-polished tiles (Factory make and approved size) as in floors, set & jointed in neat cement slurry and pointed in coloured cement with pigment over and including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

Material and labour for complete removal of existing treatment of wall including, washing, rubbing down and stopping and applying two coat oil bound distemper over and including a coat of cement base wall care putty applied as per manufaturers instruction complete all as specified and directed.

Material and labour for complete removal of existing treatment of ceiling including, washing, rubbing down and stopping and applying two coat oil bound distemper over and including a coat of cement base wall care putty applied as per manufaturers instruction complete all as specified and directed.

Material and labour for applying two coats of oil bound distemper over and including a coat of cement base wall care putty applied as per manufaturers instruction to wall to new plaster surface complete all as specified and as directed.

Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement/newly plaster surface and applying two coats of anti fungal exterior emulsion paint over a coat of cement primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of anti fungal paint over a coat of cement primer complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and & connections including and making good the disturbed surfaces complete all as specified and directed.

Taking up or down 20mm bore steel tubing and & connections including and making good the disturbed surfaces complete all as specified and directed.

Material and labour GI tubing 15mm dia medium grade galvanized with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Material and labour GI tubing 20mm dia medium grade galvanized with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old GI pipe 15 mm bore and connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old GI pipe 20 mm bore and connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

Cutting chases for concealed water tubing or concealed , etc. in brick walls and making good in cement mortar (1:3), cutting not exceeding 10cm girth complete all as specified and as directed.

M&L 10 mm thick screed bed in CM 1:4 finsished even and smooth without using extra cement on roof surfaces using water proofing compounf all as specified and as directed. (Note : WPC will be measured and paid separately).

Supply only integral water proofing liquid admixture for concrete and mortar (Make : CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of Pidilite)

Taking down/removing the existing roof treatment including backing coat if any and disposal of debris to a distance not exc. 100m as directed by Engr-in-Charge and brushing neat cement slurry with 3.0 Kg/Sqm over roof slab and priming the surface of plaster using bitumen primer @ 0.4 Ltr/Sqm and applying water proofing treatment using 3mm thick Acetic poly propylene (APP) Membrane modified pre fabricated with non woven polyester reinforced established Weight not less than 3.6 kg /sqm laid over a coat of bitumen 85/25 @ 1.2 Kg/ Sqm as per manufactures instructions complete all as specified and directed.

Supply and fixing in repair Vitreous china EWC 'P' or 'S' Trap of size 400x365x540mm, white including Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for EWC, complete making good to floor fixing bolt all as specified and directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm complete all as specified and directed.

Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 630 x 450 mm with peddestal, 32mm PVC pipe, excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type including all fittings with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

Supply and fix in repair of towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and as directed.

Supply and fixing in repairs chromium plated health faucet (ABS body) with 8mm dia .2 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix in repair stop cock concealed type of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fixing in repairs chromium plated angular stop cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix in repair chromium plated Bib taps, fancy type with crutch or butter fly handle, screwed down, screwed for iron 15mm dia pipe or for brass ferrule complete all as specified and as directed.

Supply and fixing in repairs chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.

S&F Towel Rack 600mm Long with Lower Hangers fixed with and including chromium plated brass screw and wooden/ Plastic cleats complete all as specified and directed.

S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden/Plastic cleats (Minimum weight 190 Gm) complete all as specified and directed.

S&F shelf of PTMT with and including chromium plated brass screw and wooden cleats (Minimunm weight 300 Gm).

S&F brass chromium plated toliet paper Holder with flip complete all as specified and directed.

S&F brass chromium plated soap dish in postion complete all as specified and directed By engr in charge with necessry drilling fixing rawl plug and screw complete all as specified and directed.

Supply and fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing in repair PVC Multy Utility Mirror Cabinets of 350x600mm with 4mm thick looking mirror complete all as specified and directed.

Supply and fixing in repairs chromium plated brass shower roses 125mm size (approved by GE) fixed in repair to steel pipe as union complete all as specified and directed.

Supply and fixing 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed.

Supply and fix in repair moulded polythene water storage tank of 1000 ltr capacity hosted and fixed in position and float valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms/ 25mm-455gms/ 40mm- 690 gms) and Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) including dismantling the water tank of any capacity complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm,setting and jointing with solvent cement concrete type B-1 1:2:4 complete all as specified and as directed.

Supply and fix in repair PVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fix in repair PVC (SWR) bend 110 mm dia, Shue, without access door complete all as specified and as directed.

Supply and fixing PVC (SWR) 110mm bore vent cowl complete all as specified and as directed.

Supply and fixing PVC (SWR) pipes 75 mm dia. single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

Supply and fixing PVC (SWR) 75 mm bore vent cowl complete all as specified and as directed.

Supply and fixing PVC (SWR) bend 75 mm dia with access door complete all as specified and as directed.

Supply and fixing PVC (SWR) bend 75 mm dia without access door complete all as specified and as directed.

INTERNAL ELECTRIFICATION : Taking down carefully aluminium/copper point wiring with surface/concealed PVC conduit or wooden batten (light, fan, socket, bell or power) including sunk in cast iron/pressed steel terminal boxes including fitting such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for Point wiring with 1.5 sq mm multi stranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable incl contineous earth wire of size 1.5 sq mm copper conductor multistranded FRLS, PVC inuslated (unsheathed)1100 volts grade, cuttings chasess, drawn into and including concealed rigid non mettalic PVC conduit medium grade (make of conduit-Presto Plast/Pressfit) not less than 19/20 mm (ISI marked) with all fitting and fixing accessories modular cover plate with frame including sunken boxes suitable to fix modular cover plate with frame, concealed in wall & matching with existing surfaces etc complete one light point/fan point controlled by one switch.

All as per item No. 118 here-in-before but one socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 118 here-in-before but one socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 118 here-in-before but one bell/buzzer controlled by one bell push.

All as per item No. 118 here-in-before but with 2.5 sq mm for one 15 Amps socket outlet controlled by one switch on independent board and 2.5 sq mm PVC insulated multisranded copper conductor cable as continuous earth wire complete.

Supply and Fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP/DP 10A- 20 Amps with complete accessories all as specified and as directed. Make :- Havells Cat Part No. DHDPUDP020 or equivalent make in Bajaj/Wipro/Philips/Crompton/Surya.

Taking down carefully aluminium sub main wiring with wooden batten/PVC surface conduit complete of any size complete all as specified and directed.

Material and labour in repairs for sub main wiring with two single core 6 sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable including rigid non metallic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including 6 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire, incl cutting chasess for conceled in wall & making good to the disturbed surfaces to match the existing surfaces complete all as specified and directed. Note :- Three runs of 6 sqmm copper conductor cable and one run of PVC conduit will be measured as one unit.

S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed.

S & F Ding Dong bell AC, 240 volts single pole complete all as specified and directed.

S & F Modular Bell push 6A 1 module complete all as specified and directed.

S & F Fan step regulator, 120W, 240 volts 2 module complete all as specified and directed.

S & F Modular switch 1 way 6A, 240 volts 1module complete all as specified and directed.

S & F Modular switch 1 way 16A, 240 volts 1module complete all as specified and directed.

S & F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing Lamp holder PVC/polycarbonate type with back plate suitable for batten fittings incl LED bulb 9 watt complete all as specified and directed.

S & F Endura Linear Neo surface and wall mounted LED batten 20 Watt, extruded aluminum housing for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver environmental friendly, energy efficient ready to use pack housing with reflector cover channel, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make- Havells cat Part No. ENDURALINEARNEOBS20WLED865SPCWH or equivelent in Wipro/Bajaj/Crompton/Philips/Surya.

Supply & Fixing LED Pluto Neo Panel 2 x 2, 28 Watts, 230 Volts, fitting with LED luminaire environmental friendly new generation aesthetically designed ultra modern recess mounting luminaire with high brigtness SMD LEDs as light source suitable for armstrong/grid ceiling and connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0.20mm and necessary fixing arrangement complete all as specified and directed. Havells CAt Part No. PLUTONEO2X2PLR28WLED857S or equivelent in Wipro/Bajaj/Crompton/Philips/Surya.

S & F Security/street light fitting LED 25 watt energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP-66 roadway luminaire with high power LED as light source with toughened glass and impact resistance pf IK07 complete all as specified and directed. Make :- Havells Cat Part No. ENDURAPEARLSL25WLED757SASYTOPCMP or equivelent in Wipro/Bajaj/Crompton/Philips/Surya.

S & F bracket made out of GI tubing 25 mm dia, light grade upto 1.2 mtr length, bend to shape suitable for security light fitting with necessary MS clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc and including taking out unserviceable bracket and removing from site of work complete all as specified and as directed.

Supply and Fix for sheet metal enclosures for SPN DBs 240 volts, factory made double door flush type, IP-42 protection and all as per IS-8623, made from sheet metal 12 way 200 amps rated bus bar to be fixed with wall all accessories complete including taking down the existing MCB DBs after disconnecting and making good existing disturbed wall surfaces all as specified and as directed.

S & F MCB single pole 240 volts 6 to 32 Amps complete all as specified and directed.

S & F MCB double pole 240 volts 40 Amps complete all as specified and directed.

M&L, for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers protected with & including 15 mm dia light grade GI pipe necessary excavation and earth works, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with Pre cast RCC (1:2:4) cover, GI funnel with mesh test point, testing & commissioning all as specified and directed and shown in electric plate No. 3 of MES schedule Pt-I. Note :- (i) Item of earthing includes cost of 20mm bore light grade GI protection Pipe (7.5 Meters long) for earth lead.

Singh and sons constructions

M/s SHIVRATAN CONSTRUCTION