Providing 02 No. additional 11 KV PCVCB breakers at 66/11 kV MUSS Mylanahally in Hiriyuru Operation Division KPTCL Including Supply Of equipments /Materials, Erection (Including Civil Works), Under Partial Turnkey Basis, On Item Wise Tender Basis (Excluding The Major Materials Such As Switchgears Will Be Supplied By KPTCL & Testing & Commissioning Will Be Carried Out By KPTCL) & other allied works.

Providing 02 No. additional 11 KV PCVCB breakers at 66/11 kV MUSS Mylanahally in Hiriyuru Operation Division KPTCL Including Supply Of equipments /Materials, Erection (Including Civil Works), Under Partial Turnkey Basis, On Item Wise Tender Basis (Excluding The Major Materials Such As Switchgears Will Be Supplied By KPTCL & Testing & Commissioning Will Be Carried Out By KPTCL) & other allied works.

19 core 2.5sq.mm copper control cable

4 core x 6.0 Sq.mm

2 core x 6.0Sq.mm (for ACDB to Breaker, DCDB to Breaker)

IB2 4.0 Mtrs long. - (09 Nos for indivisual structure)(Unit Weight = 0.036 MT) Total weight =0.036X18 runs=0.648 MT)

9 Mtrs long RCC Pole 150 Kgs Capacity for ODS

9 Mtrs long RCC Pole 145 Kgs Capacity

11KV 400A double break GOS

11KV 400A special roaster GOS

Drake ACSR Conductor

Coyote ACSR Conductor

90kN disc insulator

Bolted type tension Clamp for single Coyote ACSR conductor 70kN/90kN

Eye bolts for above Disc Insulators as per market rate.

C-Type Wedge Connectors for Drake to Coyote ACSR Conductor

C-Type Wedge Connectors for Coyote to Coyote ACSR Conductor

Pad Clamps for Coyote.

Pad Clamps for Rabbit.

GI Bolt & Nuts for different sizes.

Lightning arrestors, 9KV, 5KA class.

Mutli Functional Transducer (MFT) 0.2S class.

Opto coupler, 110 VDC for 110 kV & 66 kV sub-station; 220 V DC for 400 kV & 220 kV sub-stations.

Current cable- Copper core ith 2.5 sqmm cross section multistand 7 core for CT termination.

Voltage cables-copper core with 2.5 sqmm cross section multistrand 4 core for PT termination.

Signal/communication cables -Armoured copper core with 0.5 sqmm cross section multistrand 10 core.

Control cables-copper core with 1.5 sqmm cross section multistrand 10 core.

11KV Switch gear Erection of breakers, alignment & fixing to the foundation, indoor/outdoor 11 KV switchgear panel/unit including movement from the point of unloading to the point of erection.

Laying of control cables from equipments to control panels.

Errection of lightning arrestor and wiring including movement from the point of unloading to the point of errection.

Erection, alignment and assembly of steel fabricated steel lattice structure, pedestal structures and mounting structures for GOS, CTs, , LAs etc.,

II) Erection of RCC poles.

III) Digging of pits 1.8 mtr depth for errection of 9 to 10 mtr long steel/RCC/PSC supports as per approved drawing. Hard Soil.

IV) Pole concreting with out Coping CC 1:2:4 ( 9 Mtr support (650x500x1700 mm)

V) Coping of Concrete provided for 150 mm all around the Pole for an height of 300 mm for RCC, PSCC Pole.

VI) Erection of 11KV Isolator single break/double break 400A, 25KA as per ESCOMs SR 2023. SLNO : 48.98.13.03.

i)Erection of 11KV side Main bus using single Drake Conductor ACSR

ii) Erection of 11KV side cross bus using single Coyate Conductor ACSR

Grounding of equipment with 50 x 6 mm GI flat & connecting equipment to earthmat/ground pit , Each point of earthing with all formationh works like bending, twisting, drilling of holes & connecting...

Grounding of equipment including the cost of CI pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of GI flat 50 x 6 mm continuously welded alround the pipe using cast iron weldin...

Supplying and providing 450mm dia 450mm height 1.5 to 2 thick hume pipe collar (non pressure type )for earth pits including all lead and lifts etc.,

Multi Functional Transducer (MFT).

Configuration of RTU and Engineering along with validation of data at SLDC

i)11 kV Switchgear wiring : Identification of wires, Ferruling Crimping & termination of wires for annunciation, etc., Testing of relays, CTs, PTs & Breaker for operation.

i)11 kV Switchgear wiring : Identification of wires, Ferruling Crimping & termination of wires for annunciation, etc., Testing of relays, CTs, PTs & Breaker for operation (For each additional 11 kV pa...

ii)Wiring & assisting in testing and Commissioning of 11 KV indoor/outdoor Switch Gear.

Earth work excavation by manual means for drains, canals, waste weir,draft, approach channels,key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and tec...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...

Providing Thermo-Mechanically Treated bars of grade Fe-550 or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring...