Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 CrAdmitted-Finance | ₹1.5 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.6 Cr+₹18.2 L (12.4%)Admitted-Finance PLOT NO 61 BLOCK NO 7 WARD NO 1 GURGAON HARYANA 122001 | GURGAON | GURGAON | HARYANA | 122001 | ₹1.6 Cr+₹18.2 L (12.4%) | L2 | Admitted-Finance |
| 3 | L3₹1.9 Cr+₹47.6 L (32.5%)Admitted-Finance | ₹1.9 Cr+₹47.6 L (32.5%) | L3 | Admitted-Finance |
| 4 | L4₹2.3 Cr+₹88.4 L (60.3%)Admitted-Finance OFFICE BLOCK FIRST FLOOR PLOT NO 237 2 3 SUB PLOT NO A 25 CENTRAL PARK SOCIETY G I D C PANDESARA PANDESARA SURAT GUJARAT 394221 | SURAT | GUJARAT | 394221 | ₹2.3 Cr+₹88.4 L (60.3%) | L4 | Admitted-Finance |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Others-Hard copy of Bid Security Declaration is not submitted |
| Sl No | Description | Qty | Unit | Sri Venkateswaraa Engineering L1 | Industrial Project and Products Company L2 | LAXMIPATI ENGINEERING WORKS LIMITED L4 | WELTECH ENGINEERS L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Inspection, testing and supply of 50mm/75mm thick MS plate conforming to ASTM A516 Gr 70 (485) with UT & Impact test quality. | 91 | MT | 98,462 ₹89,60,042 Lowest | 1,20,100 ₹1,09,29,100 | 1,53,893 ₹1,40,04,263 | 1,21,000 ₹1,10,11,000 |
| 2.00 | Inspection, testing and supply of 1.5mm thick, SS304L sheet conforming to ASTM A240 with IGC practice A & C tested. | 2.5 | MT | 3,00,000 ₹7,50,000 Lowest | 3,50,000 ₹8,75,000 | 4,88,166 ₹12,20,415 | 4,00,000 ₹10,00,000 |
| 3.00 | Surface cleaning by mechanical brushing & two coat of red oxide painting on all surfaces of each 50mm/75mm thick pre-fabricated MS plate. | 450 | Sq. Meter | 295 ₹1,32,750 | 280 ₹1,26,000 Lowest | 483.53 ₹2,17,588.5 | 400 ₹1,80,000 |
| 4.00 | Handling, Gas cutting, grinding, groove edge formation for welding, Fabrication of 175mm thick(three layered side walls/top cover plate)cubicle by 15mm groove fillet size welding with SMAW process by using E7018 electrod followed by LPE as per approved drawing & red oxide painting over welded area. | 91 | MT | 30,000 ₹27,30,000 | 29,000 ₹26,39,000 Lowest | 41,307.53 ₹37,58,985.23 | 40,000 ₹36,40,000 |
| 5.00 | Joining of three layered side walls/top covers plates by drilling 32mm diameter holes in three plates with the help of 175mm length MS tie rod (28 numbers) by SMAW process using E7018 electrode as per approved procedure. | 28 | No | 800 ₹22,400 Lowest | 850 ₹23,800 | 1,650.8 ₹46,222.4 | 940 ₹26,320 |
| 6.00 | Locking plate fabrication, installation by SMAW process with cubicle wall edges for safe & aligned erection of cubicle walls. | 12 | No | 5,000 ₹60,000 Lowest | 5,600 ₹67,200 | 8,129.2 ₹97,550.4 | 6,700 ₹80,400 |
| 7.00 | Fabrication and installation of SS 304L 1.5mm thick lining sheet over three layered side walls/top covers plates of cubicle with the help of GTAW process by using ER 309L SS filler wire followed by LPE as per approved drawing. | 150 | Meter | 800 ₹1,20,000 Lowest | 840 ₹1,26,000 | 1,593.7 ₹2,39,055 | 940 ₹1,41,000 |
| 8.00 | Handling, erection, aligned and assembly of fabricated mild steel cubicle with the help of locking plate device as per approved drawing in cell-114 of WIP-INRPK site. | 94 | MT | 20,000 ₹18,80,000 | 18,000 ₹16,92,000 Lowest | 41,566.22 ₹39,07,224.68 | 35,500 ₹33,37,000 |
Tender Value
₹1.5 Cr
Closing Date
3 Dec 2021, 2:00 pmClosed
GM, INRPK
Office of GM, INRPK
Supply, Fabrication, Inspection and Testing of Mild Steel cubicle and cover with stainless steel 304L lining sheet over inner and outer surfaces of cubicle and its safe and aligned erection at WIP-INRPK site
2021_BARC_654868_1
BARCF/INRPK-MA/WU/TR/ 81/2021
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
365 days
Kalpakkam
As per tender specifications
7 documents required · 7 mandatory
₹0
Exempted
10 Jan 2022
5 Nov 2021
7 Dec 2021
8 Nov 2021
3 Dec 2021
9 Nov 2021
9 Nov 2021 - 25 Nov 2021
Amount
Inspection, testing and supply of 50mm/75mm thick MS plate conforming to ASTM A516 Gr 70 (485) with UT & Impact test quality.
Inspection, testing and supply of 1.5mm thick, SS304L sheet conforming to ASTM A240 with IGC practice A & C tested.
Surface cleaning by mechanical brushing & two coat of red oxide painting on all surfaces of each 50mm/75mm thick pre-fabricated MS plate.
Handling, Gas cutting, grinding, groove edge formation for welding, Fabrication of 175mm thick(three layered side walls/top cover plate)cubicle by 15mm groove fillet size welding with SMAW process by using E7018 electrod followed by LPE as per approved drawing & red oxide painting over welded area.
Joining of three layered side walls/top covers plates by drilling 32mm diameter holes in three plates with the help of 175mm length MS tie rod (28 numbers) by SMAW process using E7018 electrode as per approved procedure.
Locking plate fabrication, installation by SMAW process with cubicle wall edges for safe & aligned erection of cubicle walls.
Fabrication and installation of SS 304L 1.5mm thick lining sheet over three layered side walls/top covers plates of cubicle with the help of GTAW process by using ER 309L SS filler wire followed by LPE as per approved drawing.
Handling, erection, aligned and assembly of fabricated mild steel cubicle with the help of locking plate device as per approved drawing in cell-114 of WIP-INRPK site.
Industrial Project and Products Company
WELTECH ENGINEERS
LAXMIPATI ENGINEERING WORKS LIMITED
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
TenderDocumentcrossed.pdf
Tender Documents • 0.52 MB
GCC14.pdf
Additional Documents • 1.50 MB
BidSecurityDeclarationForm.pdf
Additional Documents • 0.01 MB
BOQ_689357.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .