Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹2.5 L+₹3,792.25 (1.52%)Rejected-AOC | L2 | Rejected-AOC L2 BIDDER |
| Sl No | Description | Qty | Unit | V.S.A.Enterprises L1 | SGS Construction L2 |
|---|---|---|---|---|---|
| 1.00 | Supply and fixing of 1400mm sweep(56") AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod on the existing clamp | 4 | Nos | 2,493 ₹9,972 Lowest | 2,530.39 ₹10,121.58 |
| 2.00 | Supply and Fixing of 4’ 18W Crystal Glass LED Tube Light Fitting including all labour charges. | 7 | Nos | 365 ₹2,555 Lowest | 370.48 ₹2,593.33 |
| 3.00 | Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water- umPurifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No.
(b) Media 11054 No. Vessel with 20 nb Multiport Valve
(with Media Pubble and Fine Sand and Activated Carbon
Filling) set
(c) Feed Pump 0.50 HP – 1 No.
(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.
(e) Membrane 40 x 40 filmtech (or) equilaents /
Osmonic (USA) - 1 No. and Membrane Pressure Vessel
40 x 40 -1 No. & Pressure Gauge - 2 Nos.
(f) Flow Meter - 1 No. 20 Filter with Housing - 1 No.,
Low Pressure Switch - 1 No., Level Switch - 1 No. &
Necessary CPVC Pipes and Fittings.
The system shall be provide with Two Panel Control
System with necessary Stainless Valves and Fittings and
Float Control etc. The rate should be inclusive of all
civil works, wherever necessary to install the System in
position and intact.(50 Litres) | 1 | No | 40,320 ₹40,320 Lowest | 40,924.8 ₹40,924.8 |
| 4.00 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification | 311.75 | M2 | 284.16 ₹88,585.74 Lowest | 288.42 ₹89,914.53 |
| 5.00 | White Porcelain Sink of size 600mm x 50mm x 200mm with 32mm dia 'B' Class GI Waste Water Pipe and 32mm dia CP Waste Coupling | 1 | Nos | 2,147 ₹2,147 Lowest | 2,179.2 ₹2,179.2 |
| 6.00 | Supply and fixing of SS Swan Neck Tap | 1 | Nos | 1,030 ₹1,030 Lowest | 1,045.45 ₹1,045.45 |
| 7.00 | Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box flush with wall with painting | 3 | Nos | 642 ₹1,926 Lowest | 651.63 ₹1,954.89 |
| 8.00Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete | |||||
| 9.00 | 3/4" dia Pvc Tap.. | 2 | Nos | 70 ₹140 Lowest | 94.8 ₹189.6 |
| 10.00 | 3/4" dia Pvc Pipe.. | 6 | m | 25.3 ₹151.8 Lowest | 25.68 ₹154.08 |
Tender Value
₹3 L
EMD Value
₹3,000
Closing Date
23 Jan 2026, 3:00 pmClosed
THE COMMISSIONER
AVADI CITY MUNICIPAL CORPORATION AVADI
Renovation work of anganwadi at Nagammai nagar 2 (33602080806) in Ward no 24.
2026_MAWS_645643_1
Roc No.12322/2025/E1_E3
Open Tender
Civil Works
Fixed-rate
60 days
Ward no 24.
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹3,000
25 Feb 2026
22 Jan 2026
23 Jan 2026
22 Jan 2026
23 Jan 2026
22 Jan 2026
Supply and fixing of 1400mm sweep(56") AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod on the existing clamp
Supply and Fixing of 4’ 18W Crystal Glass LED Tube Light Fitting including all labour charges.
Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water- umPurifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.(50 Litres)
Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification
White Porcelain Sink of size 600mm x 50mm x 200mm with 32mm dia 'B' Class GI Waste Water Pipe and 32mm dia CP Waste Coupling
Supply and fixing of SS Swan Neck Tap
Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box flush with wall with painting
Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete
3/4" dia Pvc Tap..
3/4" dia Pvc Pipe..
3/4" dia pvc elbow
3/4" dia pvc coupler
4" dia Pvc Pipe..
4" dia pvc elbow
4" dia pvc coupler
1" dia Pvc Pipe
1" dia pvc elbow
1" dia pvc coupler
1" dia valve
Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum
Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.00 MB
BOQ_773830.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .