8120/SAR-42/E8 REPAIRS TO MONSOON DRAIN, SIGN BOARD AND PAINTING OF RUNWAY, PTT, LTT AND DISPERSAL ARE AT AF STN SARSAWA

Amount

Removing old paint from old existing conc surface by paint remover or burning off by blow lamps and clening with scrapers, removing with compressed air any No of coats of any No of any width or girthcomplete all as specified and as directed.

Material and labour for one coat of painting lines, dashes, arrows, letters etc on air field pavements and the likes exceeding 10 centimetre wide with Water based road marking paint (white, golden, yellow, dark brown and black in colour ) of approved make,any shade grade-2, after preparation of old concrete surfaces complete all as specified and as directed.

Material and labour for one coat of painting lines, dashes, arrows, letters etc on air field pavement and the likes exceeding 10 centimetre wide with water based road marking paint (white, golden, yellow,dark brown and black in colour ) of approved make,any shade grade-2 over a coat of priming after preparation of new concrete surfaces complete all as specified and as directed.

Material and labour preparation of old painted steel and iron surfaces of any description not otherwise described over 10 centimetre in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for writing or painting of existing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 centimetre high (width and thickness of letters & figures as exists on ground) with synthetic enamel paint of existing tint complete all as specified and as directed.

Material and labour for re-writing or repainting of existing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 centimetre high (width and thickness of letters & figures as exists on ground )with synthetic enamel paint of existing tint complete all as specified and as directed.

All as per item No 6 here-in-above but exceeding 30 CM and not exceeding 60CM height complete all as specified and as directed.

Material and labour for writing letters or figures (Block, Roman, Italic or Indian) with retro reflective sheetings/ tape in red and yellow colour complete all as specified and as directe (Note :- Words shall be measured flat over all no deduction shall be made for gap between the letters).

Material and labour for applying one coat of synthetic enamel paint, of existing tint, on bricks, stone, concrete, CGI sheet or plaster surfaces of any description over 10 centimetre in girth or width after preparation of old existing painted surfaces ( golden, yellow in colour ) complete all as specified and as directed.

Material and labour for preparation of old decorated plastered or un-plastered surface of wall and applying one coat of white wash complete all as specified and as directed

De silting / cleaning completely solid silts/soils from drain manually and removal of silt/soil to a distance not exc. 500 metre and depositing into excavated pit of appropriate size as directed and filled up with earth in each layer of 30 cm thick all complete as specified and as directed.

Taking out existing old/broken/unserviceable runway and links sign boards of any description grouted/embedded portion from ground including disconnecting the electrical conections if any. S&F best quality board made up of acrylic sheet 4mm thick cut to following size fixed with screws by giving backing rods inside boards. S&F backing strips for sign boards made up of tinted film as in approved colour as back ground and writing letters of size 30x5cm in capital viz, A,B,C,D,E,F,H,J,L,P,W1,Y2 on both sides of the boards. PVC pipes of first quality 50mm dia 4mm thick duly inserted with the 2nd class hard wood, 15cm length (two legs for each board) at the end to be grouted on ground by excavating any type of solid and providing PCC 1:2:4 at one end and the other end should be fixed with sign board by providing nut and bolts systems complete all as specified and directed :- (a) 60cmx60cm Note : The old board shall be taking out only, when new board is ready to fixed on the same place.

Taking out existing old/broken/unserviceable runway and DTGM boards of any description grouted/embedded portion from ground including disconnecting the electrical conections if any. S&F best quality DTGM board made up of acrylic sheet of 8mm thick cut to following size made of triangle box shape fixed with screws to iron frame inside boards & writing letters of size 15 cm in capital viz, 0,1,2,3,4,5,6,7,8,9, M on both sides of the boards. MS Iron angle of size 65 x 65 x 6 mm thick, 75cm length (three legs for each board) at the end to be grouted on ground by excavating any type of solid and providing PCC 1:2:4 at one end and the other end should be fixed with sign board by providing nut and bolts systems with MS plate 2mm thick of 60mmx16mm size including dismantling unsserviceable one complete all as specified and directed :- (a) 150cmx 120cm Note : The old board shall be taking out only, when new board is ready to fixed on the same place.

Gupta Enterprises

M/s Inderlal

RAJAN TRADERS

NAQLI LAL SHARMA AND ARUN SHARMA

DHIMAN ENGINEERS & BUILDERS

NAVEEN KUMAR TYAGI