ECHP-II- Dismantling of Hoist travel I Beam and providing new I Beam 37.5 mtrs. and providing new extension side support structures 12 mtrs. length I Beam and providing column concrete pedestal at Conveyor-69 70

Lifting, loading, transportation and unloading of iron materials from TTPS to Coal jetty conveyor 69,70 head end area.

Dismantling the worn out I Beam Top Portion at Conveyor 69,70 near at JT 22,23.Loading the worn out I Beams to Pvt Vehicle and transporting and devoluting of scrap materials from coal jetty II to Central stores/TTPS and including T&P's charges and consumable, etc.,

Providing of scaffolding arrangement and necessary approach platform, for the temporary erection of the scaffolding arrangement from the ground floor to 10 mtr height beside the 2 sides of JT 22 and JT23 area near fabrication and fixing of angle supports and cleats for making approach platform for carrying out the dismantling work safely, Since JT 22,23 area is nearer to Sea water and the nature of work is highly risky and time consuming, Cutting gas and welding rods charges and T&P hire charges and consumables etc.,

Extension structurals materials of I Beam, side support beam, Top support beam, M.S Angle side and top and caset plate fabrication and erection of M.S Structural Angle, I Beam and gaset plate in Crossover structures of Conveyor 69,70 near at JT 22,23.Including cost of cutting gas and welding electrodes ,consumables hire charges etc.,

Removal of Temporary supports, Removal of supporting angles, approach platform and removal of scaffolding materials from the JT 22 area near. The temporary supports and scaffolding materials are dismantled one by one carefully, since the JT 22 area near are nearer to sea water, Scaffolding material rental .

painting with one coat red oxide paint and two coats of enamel grey paint to the entire Crossover structures at JT 22. a) one coat red oxide paint for 10 Sq.m =0.7 A + B + 0.7 C b) two coats of enamel grey paint for 10 Sq.m =1.1 A +1.5 B + 1.1 C

Providing shuttering arrangements for supporting the reinforced cement concrete surface rate including cost of all labour, lead, lift, tools etc., complete

Supplying fabrication and fixing in position of RTS rod for reinforcement including cutting bending tying and fixing in position ,Providing Bolt for entire pedestal including cost of all materials, labour, binding wire, lead, lift etc., complete

Providing RCC 1:1.5:3 using OP cement with 12 to 20mm machine crushed HBGG metal including cost of all materials, Labours, lead, lift curing etc., - Complete.