Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.4 LAccepted-AOC KASTURI MARKET JOKHAN BAGH JHANSI UP | JHANSI | JHANSI | UTTAR PRADESH | 284001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹53.1 L+₹5.5 L (11.5%)Rejected-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L2 | Rejected-AOC Rejected |
Tender Value
₹69.8 L
EMD Value
₹1.3 L
Closing Date
30 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JHANSI
HQ CWE JHANSI
REPAIR/MAINT TO CERTAIN ROAD AND CONNECTED ITEMS AT CERTAIN AREA OF ZONE C UNDER AGE B/R-I AT GE JHANSI
2023_MES_590389_1
CWE/JHA/J/TOKEN/10 OF 2023-24
Open Tender
Civil Works - Roads
Item Rate
180 days
JHANSI
As per tender documents
9 documents required · 9 mandatory
₹1,000
GE JHANSI
₹1.3 L
Yes
18 Jul 2023
20 Apr 2023
3 Jun 2023
20 Apr 2023
30 May 2023
12 May 2023
Amount
Repair to pot holes any depth, not exc 1.0 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads , paths etc. cutting around edges to at least 25mm in deth making good by filling in screened & graded road metal, watered and well ramming (including supply of road metal) complete all as specified and directed.
M&L for Scarifying or picking gravelled,macadam or btuminous macadam surfaces n.exc 50 mm deep and area exc 400 sqm complete all as specified and directed.
M&L for Scarifying or picking gravelled,macadam or btuminous macadam surfaces n.exc 50 mm deep and area n. exc 400 sqm complete all as specified and directed.
M&L for 75mm thick (compacted thickness) water bound macadam complete laid in one layer compacted thickness with coarse aggregate of grading 3 (50 to 20 mm size) and surfaces of layer will be blinded with screening and moorum, spread ,watered, consolidated and compacted , rolled and consolidated to required gradient and camber using sand or lime stone with 8 to 10 tone power roller complete all as specified and directed.
All as per Ser item No 4 above but ‘except materials complete all as specified and directed.
M&L for preparing WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc, applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm using paving bitumen VG 10 complete all as specified and directed.
M&L for laying premix bituminous, macadam with paving bitumen VG 30 @ binder content of 4% by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.
M&L for providing bituminous premixed asphaltic semi dense concrete (design mix) 40mm consolidated thickness with 5.5% binder content by weight of total mix, using paving bitumen VG30 of any penetration laid/spread uniformly by means of mechanical pavers over primed WBM surfaces rolled and compacted to required camber and gradient, complete 10 to 12 ton power roller, complete all as specified and directed.
M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using paving bitumen VG 10 complete all as specified and directed.
M&L for providing bituminous premixed asphaltic semi dense concrete (design mix) 30mm consolidated thickness with 5.5% binder content by weight of total mix, using paving bitumen VG30 of any penetration laid/spread uniformly by means of mechanical pavers over primed WBM surfaces rolled and compacted to required camber and gradient, complete 10 to 12 ton power roller, complete all as specified and directed complete all as specified and directed.
S&F inrepair for cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.
M & L for thermo plastic center or edge line, marking (reflective type ) of 2.5 mm thickness of uniform finishing with machine conforming to BS 3262 (Part-I) 1989 read with most specification of 803 clause 4.2.1 and 4.2.2 on bituminious surface in white / yellow/ red colour and super imposed with glass slam beats conforming to BS 6088 and most specification 803 clause 4.3.3 including cleaning of surface by removing all dust dirt oil grease etc including removing of existing marking with spirit / kerosene / gas burner or mechanically on bituminious surface complete all as specified and directed.
S&F in repair of solar stud (Cat eye) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed.
S&F in repair of metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed completed as per manufactures instructions etc complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors , aprons etc laid dry and pointed in CM. complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep in Hard/dence soil and getting out complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc, and getting out in sof/loose soil complete all as specified and directed.
M&L for PCC 1:4:8 type C2 using 40mm graded stone aggregates as in foundation. Filling and mass concrete complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for factory made pre-cast kerb stone of size 300 x 150 x 450mm , M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. Note : Rate for the necessary form work included in the same item.
M&L for preparation of newly concrete wall surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of priming paint plaster coat complete all as specified and directed.
M&L for 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and directed.
M&L for factory made PU coated machine pressed precast concrete interlocking paver of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with no pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 25mm thick sand cushioning complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate.
M&L for Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed bedded 20mm Screed bed in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as Edge stops etc complete all as specified and directed.
Returning, filling in trenches including spreading , leveling, watering in layers n.exc 25cm thick soft loose soil complete all as specified and directed.
Removal of excavated soil n.exc 50mtr distance and depositing where directed n.exc 1.5m above the starting point complete all as specified and directed.
Demolition of RCC Not exc 15cm thickness Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed.
Excavation in post hole (similar hole) each not exceeding 0.5 Cum getting out, returning filling in and ramming Hard/Dense soil complete all as specifide and directed.
M&L for mild steel hold fast ,clamp,hook & stay and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregates as in foundation. Filling and mass concrete complete all as specified and directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, sheets etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing or sign board with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size or embedded on PCC foundation with holdfast on floor or the side of waist slab with suitable arrangement complete all as specified and .as directed. Note:- MS hold fast and PCC foundation etc shall be not included in the said item and measured seperately.
M& L for lazer black engraving of letters or figures n exc. 30 cm width and n.exc 2 cm thickness (Block. Roman, Italic or Indian) on stainless steel sheel complete all as specified and directed.
M&L for 75mm thick moorum/red bajri brought from out side MD land, filling in layers not exceeding 15cm thick, spread watered , rolled and consolidating formation surface with 8 to 12 tonne power roller to existing camber and gradient, complete all as specified and directed.
M/S A.R BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .