Certain repair to wooden furniture and recanning of all type chair under GE (N) Bikaner

Amount

M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from Srl No. 2.00 to 11.00 including preparation, S&F New Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of french polish to all replaced components complete to match the original all as specified in drawings and as directed by Engineer-in-Charge :

TABLE PEG (FD-25/FD-384/FD-277)

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Centre/Side stiffener made of Ist class hard wood (Teak wood).

TABLE DINING FOR 6 PERSONS (FD-239/FD-273/FD-376)

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Stiffeners made of Ist class hard wood (Teak wood).

TABLE DINING FOR 8 PERSONS (FD-239/FD-273/FD-376)

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Stiffeners made of Ist class hard wood (Teak wood).

TABLE 900X600X760 mm WITHOUT DRAWER (FD-42/FD-284)

Legs Made of 1st Class hard wood (Teak Wood)

Long Rail Made of 1st Class hard wood (Teak Wood)

Short Rail Made of 1st Class hard wood (Teak Wood)

Side lower stiffener/Bottom Rail Made of 1st Class hard wood (Teak Wood)

TABLE 900X600X760 mm WITH DRAWER (FD-41/FD-283)

Legs Made of 1st Class hard wood (Teak Wood)

Long Rail Made of 1st Class hard wood (Teak Wood)

Short Rail Made of 1st Class hard wood (Teak Wood)

Side lower stiffener/Bottom Rail Made of 1st Class hard wood (Teak Wood)

S&F drawer to be made of sides and back of 12 mm thick teakwood Plank , bottom of 6 mm thick commercial plywood , Front of 18 mm thick prelaminated ext grade MDF board irrespective of whatever shown on drg including SS knobs as approved by Engr-in-Charge.

TABLE 3' x 3' (900 x 900 x 760mm) (FD-88(M)/FD-291)

Side Rails

Legs Made of 1st Class hard wood (Teak Wood)

TABLE CENTRE (FD - 235/FD-274)

Long rail made of Ist class hard wood (Teak wood).

Short/Bottom Rail Made of 1st Class hard wood (Teak Wood)

Legs Made of 1st Class hard wood (Teak Wood)

Lower Centre Stiffener Made of 1st Class hard wood (Teak Wood)

TEAPOY WOODEN (FD-232/278/382)

Long rail made of Ist class hard wood (Teak wood).

Short/Bottom Rail Made of 1st Class hard wood (Teak Wood)

Legs Made of 1st Class hard wood (Teak Wood)

TABLE DINING FOR 4 PERSONS (FD/MAP-II/03)

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Stiffeners made of Ist class hard wood (Teak wood).

TABLE WRITING (FD-33/FD-275)

Legs made of Ist class hard wood (Teak wood).

Side/Bottom Rail made of Ist class hard wood (Teak wood).

Front/Back Rail made of Ist class hard wood (Teak wood).

Centre Stiffener made of Ist class hard wood (Teak wood).

S&F in repair shutters to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick with Brass Locking Device,Magnetic Catcher and fixed with piano type hinges/MS Hinges with approved SS knob/Handle.

S&F drawer to be made of sides and back of 12 mm thick teakwood Plank , bottom of 6 mm thick commercial plywood , Front of 18 mm thick prelaminated ext grade MDF board whatever shown on drg including SS knobs/Handles as approved by Engr-in-Charge.

S&F in replacement of unserviceable back ply shall be 6 mm commercial ply BWR of size as existing complete all as specified and directed.

S&F Cabinet to be made of 18mm thick prelaminted MDF board of ext grade edging for housing drawers & partition with Shutter as per drawing and as directed.

M&L for removing old unserviceable top of items mentioned below and S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed.

Table Peg (FD-384/FD-277)

Table Dining for 6 Persons (FD-273/FD-376)

Table Dining for 8 Persons (FD-273/FD-376)

Table 900X600X760mm With/Without Drawer (FD-284)

Table 3' x 3' (900 x 900 x760 mm)(FD-88(M)/FD-291)

Table Centre (FD-274)

Teapoy Wooden (FD-232/FD-278/FD-382)

Table Dining for 4 Persons (FD/MAP-II/03)

Table Writing (FD-275)

BED HARD WITH PLY TOP ( FD-213/246/247) :

S&F in replacement of unserviceable top of bed Hard Plytop/Newar to be made of 12 mm thick (7 Ply) commercial plywood , BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with 25 mm long steel screw without having any joints, Make of ply : Kit Ply/Green ply/Century shape and size, as per drg and directed.

S&F in replacement of unserviceable long rail shall be First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as shown on drg and as directed.

All as per serial item No. 13.02 here-in-above but Short Rail/Stiffener as shown on drg and as directed.

HEAD REST : Unserviceable ply to be replaced by 3 mm thick ply wood both sides of Head Board one side teak faced and other side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI marked including teak wood beading all around and 1/2 cut 12 mm dia beading made to shape as shown on drg or directed.

FOOT REST : All as per serial item No. 13.04 here-in-above but foot rest as shown on drg and as directed.

HEAD REST : Dismantling of unserviceable Head rest of Bed ply top, S&F new Head rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4'x4'x6mm, suitable type of MS screws all as per drg and as directed.

FOOT REST : All as per serial item No. 13.06 here-in-above but foot rest as shown on drg and as directed.

S&F of MS corner bracket in right angled shape of size 4"x4", 6mm thick with six holes duly painted with black enamel paint after applying the one coat of red oxide primer with suitable MS screws to the bed as directed.

TABLE DRESSING GENTS WITH MIRROR (FD-31/FD-230/FD-379)

S&F in repair unserviceable looking mirror 5mm thick Make : Modi Guard/Atul along with new 6 mm thick commercial plywood back of mirror frame including two coats of French Polish to all parts complete all as specified and directed. Make : Green ply/Archid/Century Ply/KitPly

S&F new drawers as per shown on drawing complete all as specified and directed

Top/Bottom of box of table dressing gents made of 12mm thick exterior grade Prelaminated MDF Board as shown on drawing complete all as specified and directed.

Sides/ Partition of Box of Table dressing Made of 12 mm thick 1st Class Hard wood (teak wood) complete all as specified and directed.

Back of the Box of Table dressing Made of 12 mm 1st Class Hard wood (Teak Wood)

TABLE BED SIDE (FD-248/FD-276)

Back ply of Table bed side 6mm commercial ply (Kit ply/Archid Ply/Green Ply/Century Ply)

Sides of Table Bed side of Exterior grade Prelaminated MDF Board 18/19mm Make: Bhutan Board/Nova Pan/Action Tesa/Green Panel Max

Shelf of Table Bed side of Exterior grade Prelaminated MDF Board 12 mm Make: Bhutan Board/Nova Pan/Action Tesa/Green Panel Max

Top/Bottom of Table Bed side of Exterior grade Prelaminated MDF Board 18/19 mm Make: Bhutan Board/Nova Pan/Action Tesa/Green Panel Max

Teak Wood Legs (FD-248) joined with stiffener of 20x40mm

HAT STAND WITH MIRROR (FD-233)

S&F Peg hook brass as per drg.

S&F in replacement of unserviceable mirror with new mirror 5mm thick of make : Atul/Modiguard/Saint Gobain

M&L in replacement of unserviceable front ply and S&F new ply 3/4 mm thick one side teak faced

M&L in replacement of unserviceable Back ply and S&F new ply 3/4 mm thick

35x6mm Teak wood Edging

TABLE DRESSING LADIES WITH MIRROR (FD-32(M)/FD-251/FD-378/FD/MAP-II/07)

S&F in repair unserviceable looking mirror 5 mm thick Make : Modi Guard/Atul/Saint Gobain along with new 6 mm thick commercial plywood back of mirror frame. Make : Green ply/Archid/Century Ply/Kit Ply

S&F Glass panes of shutters made of 5mm thick plane glass as existing of Make: Modiguard/Saint Gobain with aluminium sliding.

New 1st Class hard wood (Teak Wood) Frame for 5mm thick mirror of dressing table ladies complete as shown on drawing.

S&F in repair unserviceable Back of the Table Made of 12 mm thick Ply wood as shown in Drg.

S&F new drawers as per drawing

Cylinderical SS Legs 4" as approved by Engr-in-Charge

STOOL DRESSING CB (FD-282)

Legs Made of 1st Class hard wood (Teak Wood)

Side/Front rail for seat Made of 1st Class hard wood (Teak Wood)

Centre/Short Stiffeners Made of 1st Class hard wood (Teak Wood)

BIN SOILED LINEN (FD- 244)

New bottom frame complete with legs made of hard wood (Teak Wood).

Front/back ply with new 6 mm thick commercial ply one side teak faced

Top ply with new 6 mm commercial ply one side teak faced.

SIDE BOARD (FD-26 (M)/FD-241)

S&F in repair Top/Bottom of side board made out of 18 mm thick prelaminted MDF board of ext grade

S&F in repair Sides of side board made out 18 mm thick prelaminted MDF board of ext grade

S&F in repair door shutters to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick with piano type hinges with approved SS Handle.

S&F drawer to be made of sides and back of 12 mm thick teakwood Plank , bottom of 6 mm thick commercial plywood , Front of 18 mm thick prelaminated ext grade MDF board whatever shown on drg including SS knobs/Handles as approved by Engr-in-Charge.

S&F in replacement of unserviceable back ply shall be 6 mm commercial ply BWR of size as existing.

SS Knobs

BIN LINEN MULTIPURPOSE (FD/E6/MAP/09)

S&F in repair Top/Bottom of Bin Linen Multipurpose made out of 18 mm thick prelaminted MDF board of ext grade

S&F in repair Sides of Bin Linen Multipurpose made out 18 mm thick prelaminted MDF board of ext grade

S&F in repair door shutters to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick with piano type hinges with approved SS Handle.

S&F drawer to be made of sides and back of 12 mm thick teakwood Plank , bottom of 6 mm thick commercial plywood , Front of 18 mm thick prelaminated ext grade MDF board whatever shown on drg including SS knobs/Handles as approved by Engr-in-Charge.

S&F in replacement of unserviceable back ply shall be 6 mm commercial ply BWR of size as existing.

SS handle fancy type 100mm long as approved by Engr-in-Charge

CHAIR VERANDAH (FD-256)

Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane of 4mm wide half round cane.

M&L for with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge.

M&L for painting of chair steel frame with two coat of synthethic enamel paint of approved shade Make : Berger/ Asian paints after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding and applying a primer coat of red oxide all as directed.

S&F PVC Shoes

CHAIR DINING (FD-16(M)/FD-279)

Rear Legs Made of 1st Class hard wood (Teak Wood)

Front legs Made of 1st Class hard wood (Teak Wood)

Stiffners Made of 1st Class hard wood (Teak Wood)

Bend Stiffners for back rest Made of 1st Class hard wood (Teak Wood)

Side rails Made of 1st Class hard wood (Teak Wood)

CHAIR WRITING (FD-20(M)/FD-280)

Rear Legs Made of 1st Class hard wood (Teak Wood)

Front legs Made of 1st Class hard wood (Teak Wood)

Side rails Made of 1st Class hard wood (Teak Wood)

Arms Made of 1st Class hard wood (Teak Wood)

Stiffners Made of 1st Class hard wood (Teak Wood)

CHAIR EASY (FD-17(M)/FD-229)

Legs Made of 1st Class hard wood (Teak Wood)

Side rail for seat Made of 1st Class hard wood (Teak Wood)

Front/Back Rail for seat Made of 1st Class hard wood (Teak Wood)

Arms Made of 1st Class hard wood (Teak Wood)

S&F in replacement of unserviceable PVC shoe with new Hard Rubber Ring shoes of 25mm dia of best quality for item serila item No. 2.00, 5.00, 6.00, 7.00, 8.00, 9.00, 11.00, 18.00, 23.00, 24.00 & 25.00 complete all as specified and as directed.

S&F Wooden Corner Brackets of size 50x50x20mm in serial item No 2.00, 8.00 & 9.00 here-in-above.

S&F Wooden Corner Brackets of size 75x75x25mm in serial item No 5.00, 6.00, 18.00, 23.00, 24.00 & 25.00 here-in-above.

S&F Wooden Corner Brackets of size 100x100x25mm in serial item No 3.00, 4.00, 7.00 & 11.00 here-in-above.

S&F Wooden Corner Brackets of size 100x100x35mm in serial item No 10.00 & 13.00 here-in-above.

M&L for removing the existing u/s eye hook/Key Plate and S&F new MS eye hook all as specified, complete in all respect at site.

Labour for removing the U/S worn out / broken cane & re-canning with new plastic cane of not less than 1.8mm wide x 0.46mm thick and border caning atleast 3.5mm wide as per Godrej pattern including total scrubbing & cleaning of surfaces tightening the frame for chair dining, chair writing, chair easy, stool dressing, Bin soiled linen, etc. Complete all as specified and as shown in drgs and as directed.

S&F New MDF Sheet of thickness 3mm, Make : Action Tesa/ Green Panel Max on old outer Surface of Side Board, Bin Linen Multipurpose, Table Dressing Ladies etc

NOTICE BOARD (FD-01/FD-99/FD-117) : Removing the old u/s soft board, baize green cloth, old/broken glass from wooden frame of notice board and S&F the new baize green cloth, soft board with 4mm transparent Acrylic sheet (4mm Perspex) and finishing of wooden surfaces with french polish complete for Notice Boards of different sizes as mentioned below

Notice boad of size 1830 mm x 1220 mm

Notice boad of size 2440 mm x 1220 mm

Notice boad of size 900 mm x 600 mm

Notice boad of size 1530 mm x 900 mm

Labour for cleaning, mild grinding and preparation of old treated wooden surfaces of any description,filling of cracks with putty including tightening of loose joints if any and applying two coats of french polish for the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge (including polishing at site)

Bed plywood top FD-213/FD-246

Bin soiled linen FD-15/FD-244

Chair Easy FD-17/FD-229

Chair Writing FD-20(M)/FD-280

Chair Dining FD-16/FD-279/MAP

Table dining 6 pers FD-30/FD-239/FD-273

Table dining 8 pers FD-30/FD-239/FD-273

Table 900x600x760mm w/drawer FD-41/FD-283

Table 900x600x760mm w/o drawer FD-42/FD-284

Table 900x900x760mm FD-88(M)/FD-291

Table writing FD-33/FD-275

Peg table FD-25/FD-277/FD-384

Table bed side FD-28/FD-276/FD-248

Table dressing Gents FD-230/FD-382/FD-379

Table dressing Ladies FD-251

Table centre FD-235/FD-274

Side Board FD-26/FD-241

Sofa set 5 seater FD-281/FD-373/FD-258

Sofa set seater single chair (FD-281/FD-373/FD-258)

Stool dressing FD-27/FD-252

Hat stand FD-206/FD-233/FD-362

Teapoy wooden FD-232

M/S SUNIL TRADERS

SMS Enterprises

M/S CHANDER SHEKHAR

Khatri Trunk Factory