COMPREHENSIVE MAINTENANCE AND CERTAIN B/R AND E/M REPAIR WORK OF MD OFFRS ACCN BLDG NO M-5/2 AND 4,M7/3 AND 4,C-19/4 AND C-21/2 AND 4 AT MAP-I AND P-36/4 AND P-13/2 AND 4 AT KHETRAPAL ENCLAVE OTHERS BLDGS UNDER GE (A) SURA

Amount

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set in tile adhesive confirming to IS-15477-2019 type 1 and thickness as per manufacturer instruction of approved make over & including 15mm thick screed bed in cement & sand mortar (1:6) including dimantling of existing floor tiles/finishes and rubbish off premises complete all as specified and as directed by Engineer-In-Charge. Note:- Joints of tiles shall be filled with appropriate white cement base grouting compound to match the colour of tiles

S&F 20mm outer dia dia CPVC pipes SDR 11 & Plain/Brass fittings(Elbow,Tee,MTA,FTA,Union) CPVC SDR 11 fittings on walls/ceiling or laying in floors including plug at opening or points for fiting and fixtures and powder coated clamps for fixing in walls complete all as all fittings and fixed and taking down of existing pipe of any descripttion complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F of 25 mm outer dia and laying of CPVC pipes SDR 11 & Plain/Brass(Elbow,Tee,MTA,FTA,Union,Tank Adapter,) CPVC SDR 11 fittings on walls/ceiling or laying in floors including plug at opening or points for fiting and fixtures and powder coated clamps for fixing in walls complete all as all fittings and fixed and taking down of existing 20 mm bore pipe of any descripttion complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F for special fittings ball valve for connecting of CPVC tubing outer dia 20/25 mm as specified and directed by Engineer -in-charge.

Disconnecting & taking down the existing unserviceable water tank and Supply and fixing of 500 Litre capacity 4 layer antimicrobial tank of hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm PTMT Float valve complete as specified in SSR Part-I and as directed. Note :- Contractor shall be submitted manufacturer warranty Certificate with Batch No. and Date Of Purchasing. and contractor also shall be marked of Date Of Fixing and CA No. on Tank with Synthetic Enamel Paint in words not less than 6" in Height. MAKE: Sintex Pure/ Ashirwad Weatherguard/ Asteral Cleo or other Technocommercial as mentioned in Appx 'A' here in after.

Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 1000 Litre capacity 4 layer antimicrobial tank of weather guard hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm PTMT Float valve complete as specified in SSR Part-I and as directed. Note :- Contractor shall be submitted manufacturer warranty Certificate with Batch No. and Date Of Purchasing. and contractor also shall be marked of Date Of Fixing and CA No. on Tank with Synthetic Enamel Paint in words not less than 6" in Height. MAKE: Sintex Pure/ Ashirwad Weatherguard/ Asteral Cleo or other Technocommercial as mentioned in Appx 'A' here in after.

Disconnecting & taking down the existing unserviceable water tank and Supply and fixing in replacement of 700 Litre capacity 4 layer antimicrobial tank of weather guard hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm PTMT Float valve complete as specified in SSR Part-I and as directed. Note :- Contractor shall be submitted manufacturer warranty Certificate with Batch No. and Date Of Purchasing. and contractor also shall be marked of Date Of Fixing and CA No. on Tank with Synthetic Enamel Paint in words not less than 6" in Height. MAKE: Sintex Pure/ Ashirwad Weatherguard/ Asteral Cleo or other Technocommercial as mentioned in Appx 'A' here in after.

M&L as in repair brass chromium plated bottle trap with 32mm dia discharge pipe having minimum water seal or 25mm for wash basin with inlet and outlet screwed for pipe or connections including necessary packing , union and cap complete all as specified & directed . Make :- Somani cat part No 2721500540411 and equivalent from Jaquar/Kohler or other Technocommercial makes as mentioned in Appx 'A' here in after.

S&F as in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like duroplast seatcover, rag bolts, gel gasket etc and ABS health facuet. complete in all respect all as specified. Make : Parryware- verve, Jaquar- CNS-WHT-963S, Hindware-Element or other Technocommercial makes as mentioned in Appx 'A' here in after.

S&F in repair one piece/ Single body PVC blow moulded conceled cistern, pneumatic type; capcity 9-10 litres, including chrome finish dual flush control plate, flushing pipe and fixig brackets complete assembled and fixed at site complete all as specified and as directed Note:- Cistern Shall be Compatible with Wall Hung EWC And of Same Make.

S&F as in repair Brass Chromium plated Sink Mixer, swan neck type for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed by Engineer in Charge. Make : Jaquar- Kubix prime, Grohe- Bau, Kohler-Parallel or other Technocommercial makes as mentioned in Appx 'A' here in after.

S&F as in repair Angle valves, Brass, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge. Make :- Jaquar- Kubix prime, Grohe- Bau, Kohler-Parallel and other Technocommercial makes as mentioned in Appx 'A' here in after.

S&F as in repair 15mm bore wash hand basin mixer wall mounted single lever bathroom sink faucet (concealed+ Upper part) complete all as specified and as directed. make : Jaquar- Kubix prime, Grohe- Bau, Kohler-Parallel or other Technocommercial makes as mentioned in Appx 'A' here in after.

S&F as in repair Wall Mixer with Single lever concealed divertor bath & shower 46 mm (forged body) and bath tub spout including Shower Arm 18",Bath Tub Spout And 200 mm Round Shower with ABS Body Chromium Plated.complete fixed as per manufracturers direction . Make : Jaquar- Kubix Prime, Grohe -Bau, Kohler - Parallel or other Technocommercial makes as mentioned in Appx 'A' here in after.

S&F Stop valve 15 mm brass chromium plated (concealed type) with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm dia fixed in repair. make : Jaquar- Kubix prime, Grohe- Bau, Kohler-Parallel or other Technocommercial makes as mentioned in Appx 'A' here in after.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply and fixing factory made uPVC white colour fixed/ openable casement glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality including taking down exisitng window, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for 15mm thick rendering in cement mortar (1:4) on urface of brick masonary or concrete surface of walls, finished even & smooth without using extra cement and inclusive of Liquid water proofing compound as per manufacturer instruction complete including taking out existing plaster all as specified and directed.

M&L for racking of existing grouts of brick tiles and grout flush in Cm 1:3 with 5% crude oil by weight of cement complete all as specified and as directed by engineer-In-Charge.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, cooler stand 12mm sq guard bar, framework of water tanks and similar works of quality Fe 290 (Gde E-165) etc complete all as specified and directed by Engineer-in-charge.

M & L for Cement concrete 1:2:4 type M-25 using 20mm graded stone aggregate Columns, pillars, piers, posts and struts as specified and directed by Engineer-in-charge.

Water proofing treatment to sunken slab and adjjoining vertical surfaces as specified under :- (a) Demolition of cement concrete in sunken portion. (b) Preparation sunken surfaces by cleaning of and removal of loose concrete (c) Filling cracks with polymer modified mortar using Dr. Fixit Pidicrete URP or equivalent in Forsoc and other approved make (d) Applying 2 coats of Dr. Fixit Bath seal WPC in suken areas and laying a protective plaster in 10mm thickness in cement mortar (1:3) admixed with Dr. Fixit Pidicrete LW + @ 220ML per bag of cement (e) Applying mix of of DR FIXIT PIDICRETE URP in the ratio 1:1:5 on floor and vertical surface of sunken portion as per manufacturers instructions complete (f) Filling with P:C:C 1:5:10 Type-E2 using 40 mm graded brick aggregate complete all as specified and directed by Engineer-in-charge Note: The plan area of floor shall be considered for payment.

S&F as in repair 110mm bore PVC (SWR) pipes as Per IS 13592 single socketed, in any length with/wthout rubber ring joints, fixed to walls including dismantling existing CI/PVC pipe alongwith fittings of 75/100mm dia including coupler,reducer,Bends fittings,below or above GL, laid in floors or fixed to walls jointed in cement mortar complete all as specified and as directed.

S&F PVC (SWR) bend any radius 110 mm bore as Per IS 14735 complete all as s pecified and as directed

S&F as in repair 75 mm bore PVC (SWR) pipes Per IS 13592 single socketed, in any length with rubber ring joints, fixed to walls after Dismantling CI/PVC pipe alongwith fittings of 75/100mm dia including coupler,reducer,Bends fittings ,below or above GL, laid in floors or fixed to walls jointed in cement mortar complete all as specified and as directed.

S&F PVC (SWR) bend any radius 75 mm bore with owl access as Per IS 14735 complete all as specified and as directed.

Supply and fixing as in repair PVC (SWR) junction single, (Single T) equal or unequal bore 110 mm provided with owl access door Per IS 14735 complete all as specified and as directed.

S&F PVC (SWR)75 mm floor trap, plain with CP Lock & Hole / Lock & Frame type grating including jointing with solvent cement complete all as specified and as directed.

S&F as in repair of PVC(SWR) vent cowl 75 mm inclusive of reducer socket complete all as specified and as directed.

S&F Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt RM System-1. Overhead Tank Riser Domestic Water Supply Down take lines 3/4" GI-4 nos. from Terrace to 1st Floor Vertical Fixed line with wall distance 3": Pipe Support Clamping made of: 1. Profile Bracket Wall Distance 3" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 18" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985)-610 grams/m2 (>85 microns). Material Grade: IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty: 1. Profile Bracket Wall distance 3"-2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 18"-1 No; 3. U Bolt R/M for 3/4" GI pipe Dia. -4 nos. 4. Justi Khilla Gl coated 2 1/2"-4 nos. Fixing details:Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO:- BTD-916, Make: ISI Marked as approved by GE.

S& F Tollet Water Supply Pipe 3/4" (20 mm)-2 nos. downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt R/M System -1. Domestic Water Supply Down take lines 3/4" GI-2 nos. from Terrace to 1st & Ground Floor Vertical Fixed line with wall distance 3": Pipe Support Clamping made of: 1. Profile Bracket Wall Distance 3" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method-ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 10" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx, Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985)-610 grams/m2 (>85 microns). Material Grade: IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty: 1. Profile Bracket Wall distance 3"-2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 10" - 1 No.; 3. U Bolt R/M for 3/4" GI pipe Dia. - 2 nos. 4. Justi Khilla GI coated 2 1/2"-4 nos. Fixing details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. Make: ISI Marked as approved by GE.

S&F for Pipe Supporting Clamping - Single Pipe of dia 110 mm (4") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. Make: ISI Marked as approved by GE..

Supply for Pipe Supporting Clamping - Single Pipe of dia 75 mm (3") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. Make: ISI Marked as approved by GE.

M&L for Granite (south) 20 mm thick of any type work table rubbed and polised in steps,jambs,pillars,window cill, cooking plateforms and like in cement mortar 1:4 including pointing cement mortar 1:2 using marble dust with admixure of pigments to match with shade of granite over 15 mm thick screed bed of CM 1:6 complete incl nosing of edge as per site requriment complete all as specified and as directed.

Taking down existing chowkhat/frame with sutther (Without taking of shutter from the frame) of exc 1.5sqm but not exc 4sqm and M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant.and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.

Taking down existing chowkhat/frame with sutther (Without taking of shutter from the frame) of exc 1.5sqm but not exc 4sqm M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm double Rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant.and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.

M&L as in repair 0 degree clip type self closing hinges for kitchen cupboards fixed with cadmium coated screws as per manufacturer instruction complete all as specified and as directed by Engineer-In-Charge.

M&Las in repair 100 mm size bright finished chromium plated steel handles od approved shape and design fixed with cadmium coated screws on the kitchen cabinet drawers, complete all as specified and as direcetd by Engineer-In-Charge.

M&L as in repair 25 mm thick Stainless Steel pipe Curtain Rod fixed with 2 nos steel brackets and Steel knobs at corner end where required as per site requirement including making good disturbed portion with 1:3 cement plaster and finshing treatment of existing wall quality complete all as specified and as directed by Engineer-In-Charge.

M&L for Kitchen Perforated cutlery basket SS 304 grade 4" fixed in kitchen drawer including 2 Nos 22" telescopic channel complete fixed to cupboard material all as specified and as dircetd by Engineer-In-Charge Make:- Godrej, Hettich,Durian or other Technocommercial makes as mentioned in Appx 'A' here in after.

M&L for Kitchen Cup And Saucer basket SS 304 grade 6 " fixed in kitchen drawer including 2 Nos 22" telescopic channel complete fixed to cupboard material all as specified and as dircetd by Engineer-In-Charge Make:- Godrej, Hettich,Durian or other Technocommercial makes as mentioned in Appx 'A' here in after.

M&L for Thali Basket 8" of SS 304 grade fixed in kitchen drawer including 2 Nos 22" telescopic channel complete fixed to cupboard material all as specified and as dircetd by Engineer-In-Charge Make:- Godrej, Hettich,Durian or other Technocommercial makes as mentioned in Appx 'A' here in after.

Material & Labour for providing and fixing stainless steel (Grade 304) railing/grill made of hollow tubes,square bar, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engineer-In-Charge.

M&L for Brass mortise lock set with handles 175mm and 6 lever locking mechanism complete all as specified and as directed by engineer-In-Charge.

Taking down existing chowkhat/frame with sutther (Without taking of shutter from the frame) of not exc 1.5sqm and M& L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant.and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.

M&L for Providing factory made 18 mm thick 100 % Solid WPC ( Wood Polymer composite) laminated finish shutter of required size comprising of virgin PVC resin of K-value 57-60 ( Suspnsion grade), calcium carbonate and natural fibers( wood powders/rice husk/wheathusk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm manufactured by a ISO-9001-2015 certified comany,having good screw holding capacity (screw withdrawl strength of 2000 N (Face) & 1100 N Edge), Minimum compressive strength of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of class A category with property of being Termite/Borer Free, water/Moisture Proof and fire Retardant. WPC to be laminated with PVC foilof minium 14 micros thick of approved design pasted on both faces of shutters and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter shunk SS screws. All as per direction of Engineer-In-Chrage, material test certificate and authentication should be compulsory provided by the manufacturing company: For PVC/BATHROOM/TOILET/KITCHEN/BALCONY DOORS and CABINETS

M&L for Providing factory made 30 mm thick 100 % Solid WPC ( Wood Polymer composite) laminated finish shutter of required size comprising of virgin PVC resin of K-value 57-60 ( Suspnsion grade), calcium carbonate and natural fibers( wood powders/rice husk/wheathusk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm manufactured by a ISO-9001-2015 certified comany,having good screw holding capacity (screw withdrawl strength of 2000 N (Face) & 1100 N Edge), Minimum compressive strength of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of class A category with property of being Termite/Borer Free, water/Moisture Proof and fire Retardant. WPC to be laminated with PVC foilof minium 14 micros thick of approved design pasted on both faces of shutters and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter shunk SS screws. All as per direction of Engineer-In-Chrage, material test certificate and authentication should be compulsory provided by the manufacturing company.

M&L for Providing factory made 30 mm thick 100 % Solid WPC ( Wood Polymer composite) laminated finish Glazeged shutter of required size comprising of virgin PVC resin of K-value 57-60 ( Suspnsion grade), calcium carbonate and natural fibers( wood powders/rice husk/wheathusk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm manufactured by a ISO-9001-2015 certified comany,having good screw holding capacity (screw withdrawl strength of 2000 N (Face) & 1100 N Edge), Minimum compressive strength of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of class A category with property of being Termite/Borer Free, water/Moisture Proof and fire Retardant. WPC to be laminated with PVC foilof minium 14 micros thick of approved design pasted on both faces of shutters and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter shunk SS screws. All as per direction of Engineer-In-Chrage, material test certificate and authentication should be compulsory provided by the manufacturing company. Note:- Glazed Shutters should be made of minimum Three Panelles and the Wire Mess Shall be Of Stainess Steel .

M&L for Roof Treatment in as specified below and as directed : (a) Dismantling existing Brick Tiles laid in Cement Mortar. (b) Demoition Of existing Lime Concrete/Mud Puska complete . (a) Cleaning, washing of surface and removing any debris, Surface should be free from any loose paint, dust or grease. (b) Applying one coat of Elastomeric PU Based liquid membrane diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm. (c) Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls. (d) Applying two coats of undiluted PU Based liquid membrane, having Elongation more than 400%, Tensile Strength more than 2 N/mm2 and alkali & fungal resistant maintaining thickness of 1.5mm, with paint brush/ roller upto 300 mm on walls. (e) The complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Make : Asian/Fosroc/ Dr Fixit etc Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment .

M&L for PCC 1:2:4 Type B-1 using 20 mm aggregates as in levelling course to maintain min 1:40 Slope for rain water flow area till Rain Water Pipe complete all as specified and as directed By Engineer-In-Charge..

M&L Heat Resistant Terrace Tiles (300 mm x 300 mm x 10-12 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and as directed

M&L for solid pvc sheet for 18 mm width & 1 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as directed by Engineer-In-Charge.

Taking down carefully or drawn out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators, MCB, DB, lamp, earth plug etc (excluding MS sunken boxes) and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 59 here-in-before but for One 3 pin 5 Amp socket outlet one light point controlled by one switch on the same board with other switches.

All as per serial item No. 59 here-in-before but for One 3 pin 5 Amp socket outlet one light point controlled by one switch on independent board.

All as per serial item No. 59 here-in-before but for One bell or buzzer point controlled by by one push button on independent board.

All as per Srl item No. 59 above, but wiring with cable of cross sectional area 4 Sqmm (nominal area) multi-stranded copper conductor FRLSH, PVC sheathed cable 1100 Volts shade for one switch socket combination 6 pin, 5/15 Amps on independent board including 4 Sqmm PVC insulated multistranded unsheathed copper conductor wire as earth continuity to common earth dolly.

S&F Modular switch piano 6 Amps single pole, one way, 01 Module complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Modular switch piano 15/16 Amps single pole, one way, 01 Module complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Modular socket 2 / 3 pin, 6 Amps, 230 volts, combined 2 Module complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after.

S&F Modular socket 2 / 3 pin, 6/16 Amps, 230 volts, combined 2 Module complete all as specified and directed by Engineer-in-charge.Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after.

S&F Modular bell push, flush type, 5 Amp, 230 Volts grade complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F Modular electronic fan regulator suitable for ceiling fan 2 Module, 1200mm / 1400mm sweep, socket size, rotary type complete all as specified and directed by Engineer-in-charge. Make :Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F as in repair sheet metal plug & socket DB, SP, with a two pin and earth plug with socket, 230 Volts with & including one MCB SP ‘C’ Curve 10 kA, 20 Amps complete all as specified and directed by Engineer-in-charge.

S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified and directed by Engineer-in-charge.

S&F electric bell (ding - dong), AC, 230 Volts, Single pole & connecting up complete all as specified and directed by Engineer-in-charge.

S&F Energy efficient decorative ultra slim, prewired, lumiline 20 watt LED light fitting (Day cool light), batten type with drive & polycarbonate housing including tube rod and all accessories prewired fixed on wall / hanging complete all as specified and as directed by Engineer-in-charge. Make : Havells Cat Part No.:- LHEXAZP7PN1W020/Crompton Cat Part CCS-103-20-65-SL-DP-NWH/Wipro Cat Part D532065 or equivalent cat part of Make as specified in Appendix "A".

S&F Energy efficient decorative ultra slim, prewired, lumiline 10 watt LED light fitting (Day cool light), batten type with drive & polycarbonate housing including tube rod and all accessories prewired fixed on wall / hanging complete all as specified and as directed by Engineer-in-charge. Make : Havells Cat Part No.:- LHEXAZP7PN1W010/Crompton Cat Part CCS-103-10-65-SL-DP-NWH/Wipro Cat Part D531065 or equivalent cat part of Make as specified in Appendix "A".

Supply, fixing and testing in repair LED Street / Security light fitting of 30 Watt, 5700K - 6500 K (including LED drive and internally prewired) complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminum alloy. The luminaries shall be monolithic construction totally enclosed dust and water proof with IP -65 / 66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 300 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distortion THD(I) less than 15% ,cool white colour and lamp starting time should not be more than 10 second including 10 KV surge protection in built or external. Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection, no load , open circuit and short circuit protection .LED light fitting should be suitable for ambient temperature from -10 degree Centigrade to 50 degree Centigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 65 degree protection. Cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 100 lumens per watt and must be certified by the LM-79 test report and including connection for street light from pole box with 1.5 Sqmm, 3 core PVC insulated stranded copper conductor FRLSH cable, 1100 Volts grade ISI marked including addition / alteration in bracket (if required) for fixing light fitting complete all as specified and directed by Engineer-in- charge. S&F Energy efficient decorative ultra slim, prewired, lumiline 20 watt LED light fitting (Day cool light), batten type with drive & polycarbonate housing including tube rod and all accessories prewired fixed on wall / hanging complete all as specified and as directed by Engineer-in-charge. Make : Havells Cat Part No.:- LHETAVU7PA7J030/Crompton Cat Part TRP-415-30-57-SL-LM-NBK/Wipro Cat Part D912065 or equivalent cat part of Make as specified in Appendix "A".

Supply and fixing LED luminaire surface/ceiling light, 12 watt, 220 V AC recessed type with opal diffuser complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make : Havells Cat Part No.:- LHEABMP7UL1W012/Crompton Cat Part LCDSPLN-R-12CDL/Wipro Cat Part D641265 or equivalent cat part of Make as specified in Appendix "A".

S&F as in repair flush mounting factory made VTPN DB 4 way, 415 Volt, Double door, IP-43 protection, IK-09 with metal door with 160 Amps copper bus bar, with 02 neutral bar, 02 earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed by Engineer-in-charge. Make :Legrand/L&T/Schneider or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F MCB 6 to 32 Amps, Single Pole 240 Volts, 10 KA, ‘C’ Curve, complete all as specified and directed by Engineer-in-charge. Make :Legrand/Havells/Schneider or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F as in repair MCB 40-63 Amps, Single Pole & neutral 240 Volts, 10 KA, ‘C’ Curve, complete all as specified and directed by Engineer-in-charge. Make :Legrand/Havells/Schneider or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F in replacement Sub main wiring complete with 2 single core 6 Sqmm (Nominal area) multi stranded copper conductor PVC insulated unsheathed cable FRLSH drawn in and including heavy duty PVC conduit ISI marked not less than 25mm dia concealed including single core multistranded copper conductor 6 Sqmm size cable as earth continuous wire drawn in same conduit complete all as specified and directed by Engineer-in- charge Note : Two runs of 6 Sqmm single core cable and one run of 6 sqmm copper wire earth continuty conductor and conduit with fittings shall be measured as one length.Make of Cable: Havells/Finolex/L&T/RR KABEL or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after. Make of Conduit :Supreme/AKG/Finolex or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after

S&F as in repair street light bracket made out of 32mm dia GI pipe light grade 1.20m long , bent to shape at 120 degree angle from vertical fixed along pole with and dirlling holes including required number of clamp made out of Flat iron 25mm x 6mm with nuts, bolts ,washers etc. duly painted with two coats of aluminium paint including any addition / alteration (if required) for fixing street light complete all as specified and as directed by Engineer-in-charge. Note :- Old unserviceable material retrieved from above mentioned all items shall be deposited in store yard of subdivision by the contractor at his own arrangement. Noting extra shall be paid on this account.

M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3516824)

PACHAR BROTHERS (BID ID -3517294)

SHERA RAM CONTRACTOR (BID ID -3516577)