Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.4 LAccepted-AOC 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹47.9 L+₹3.3 L (7.46%)Rejected-Finance 30 SHIVTALLA STREET KOLKATA 700 007 | KOLKATA | KOLKATA | WEST BENGAL | 700007 | L2 | Rejected-Finance other than lowest | |
| 3 | L3₹48.6 L+₹4.0 L (8.89%)Rejected-Finance | L3 | Rejected-Finance other than lowest | |
| 4 | L4₹48.9 L+₹4.3 L (9.69%)Rejected-Finance 6A BANAMALI GHOSHAL LANE KOLKATA 700034 | KOLKATA | WEST BENGAL | 700034 | L4 | Rejected-Finance other than lowest | |
| 5 | L5₹49.5 L+₹4.9 L (11.0%)Rejected-Finance AKASHGANGA SUKANTA MARG MONIRAMPORE BARRACKPORE WEST BENGAL 700120 | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L5 | Rejected-Finance other than lowest |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
30 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
PROVN OF HARDSTANDING AND CONNECTED MISC WORKS ALONG PARADE GROUND INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2022_MES_560995_1
8936/E8
Open Tender
Civil Works
Item Rate
120 days
GE (FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹89,000
23 Dec 2022
2 Nov 2022
1 Dec 2022
2 Nov 2022
30 Nov 2022
16 Nov 2022
Amount
SCHEDULE 'A' PART-I (B/R WORKS): M&L for excavating over areas not exceeding 1.5 metre deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for laying of UG Cable/Pole/Stays, etc., getting out including forming bottom surface to required level and gradient in Soft/ Loose Soil and getting out, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 Cm in Soft/ Loose Soil, complete all as specified and as directed.
Removing excavated materials not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed.
Rolling and consolidation to required gradient and camber of formation surface (in cutting or filling) of roads with 8 to 12 tonne power roller including watering as necessary and consolidating to the required level, gradient or camber, keeping roller wheels wet, if required, filling in hollows and depressions which occur during rolling and provision of water, road roller, drivers, crew, fuel, labour, tools, etc., complete all as specified and directed.
M&L for soling (or sub base) with broken boulders or quarried stone (spread thickness) 150mm thick laid in two layers of 75mm each, interstices filled, surface formed and each layer rolled separately with 8 to 12 Tonne power roller and consolidated to required gradient and camber, complete all as specified and directed. (NOTE:- Measurement shall be done for 150 mm thickness)
M&L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of granite, trap or basalt stone of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required with 8 to 12 ton power roller, complete all as specified & directed.
M&L for 150mm thick DLC mix design using minimum cement 150 kg / cum and 7 days compressive strength 10 kg/sqm using crushed stone aggregates as in mass concrete including necessary steel formwork including spreading, rolling and consolidating to require gradient and camber aggregate gradation shall be as per table 600.1 of MORTH all as specified and directed.
S&F 150 micron thick polyhene film in a layer laid on ground complete all as specified and directed (Note : Net measurement shall be measured without any allowance of overlaps)
M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 Kg/per square centimeter using non circular triangular synthetic fibre recron 3S of 12mm size @ 0.25% of weight of cement and in field using 400 Kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as per specified and directed Note : (i) Nothing to be paid over and above 400 kg/cum (ii) Non Circular synthetic fibre shall be measured and paid separately
Supply only non circular triangular synthetic fibre 12mm size Recron 3S as secondary reinforcement in concrete all as specified and directed.
Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed.
Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as Specified and as directed.
Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as Specified and as directed.
Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ complete all as Specified and as directed.
Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade ‘A’ complete all as Specified and as directed.
M&L Sand filling under floors under paver block, including watering and consolidation, complete all as specified and as directed
Supply and laying Machine pressed glazed precast concrete interlocking paver block PU mould with grey cement and pigment with approved colour of any shape and size (size and shape as approved by GE) confirming to IS 15658-2006 of 80 mm thickness M-50 Grade, complete all as specified and as directed. (NOTE: Sand cushioning shall be measured and paid separately)
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement:3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required.
M&L for two coats of synthetic enamel paint over a coat of primer to concrete or plastered surfaces, plain or moulded n.exc 10 cm width or girth including preparation of surface all as specified and as directed.
M&L for preparing bituminous/rigid surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc., and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine, all as per manufacturers instruction, complete all as specified and directed.
Providing and laying factory made pre cast concrete saucer drain of M-30 grade cement concrete using joint less FRP mould in position to the required line, level, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints shall not to more than 5mm), complete all as specified.
SCHEDULE 'A' PART-II (EXT ELECTRIC SUPPLY): M&L for sand cushioning / sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed.
M&L bricks with sub class 'B' locally available laid in trenches above sand cushioning for cable protection complete all as specified and as directed.
Laying only old PCC cover / bricks available in trenches above sand cushioning for cable protection complete all as specified and as directed.
M&L un-reinforced precast concrete cable cover, class HVP, Type 1 with peak, size 300mm x 180mm x 40mm laid in trenches above sand cushioning for cable protection complete all as specified and as directed.
Laying only old PCC cover/bricks available in trenches above sand cushioning for cable protection complete all as specified and as directed.
Taking down unserviceable LT cable for repair/ replacement etc (from cable duct/underground trench/pole), stacking properly (cable, pipe and bricks) complete all as directed by the Engr-in-Charge of the following cross - sections :- (Note: Necessary earth work to be measured and paid separately).
70 Sqmm to 150 Sqmm, 3.5 Core
185 Sqmm to 240 Sqmm, 3.5 Core
Taking down carefully serviceable HT XLPE cable of cross sectional area 95 to 300 Sqmm, 3 core (from cable duct / underground trench / pole), stacking properly (cable, pipe and bricks) for shifting of cable in new trench, complete all as directed by the Engr-in-Charge. (Note : Necessary earth work to be measured and paid separately.)
Labour only for Relaying of XLPE Under Ground Cable of any description (Serviceable Cable obtained from Item No. 27.00 here-in-before) 1100 Volt grade, after Fault rectification including necessary Aluminium Thimbles, jointing and Testing, complete of the following sizes and cross sectional areas:- Note: Necessary earth work to be measured and paid separately).
70 Sqmm to 150 Sqmm, 3.5 Core
185 Sqmm to 240 Sqmm, 3.5 Core
Labour only Relaying HT XLPE Under Ground Cable of any description (Serviceable Cable obtained from Item No. 28.00 here-in-before) 6.6Kv, cross sectional area 95 Sqmm to 300 Sqmm 3 Core shifting of XLPE Cable including necessary Aluminium Thimbles, jointing and Testing, complete all as specified and as directed.
Supply, Laying and testing of XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall with saddles/Flat iron clamps as per site requirement /passing through pipe/pole complete of the following sizes and cross sectional area :- (Note : Necessary earth work to be measured and paid separately).
70 Sqmm, 3.5 Core
120 Sqmm, 3.5 Core
185 Sqmm, 3.5 Core
Supply and laying of XLPE insulated (E), screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 6.6 KV grade, laid in trenched complete of the following sizes and cross sectional area :-
95 Sqmm, 3 core
300 Sqmm, 3 core
S&F Heat shrinkable straight through Jointing Kit suitable for 1100 volts grade XLPE insulated stranded aluminium conductor cable including testing on completion complete all as specified and directed by the Engr-in-Charge for the following size of cables :-
70 sqmm to 150 sqmm, 3.5 core
185 sqmm to 240 sqmm, 3.5 core
Supply, jointing and testing of cable jointing kit for 6.6 KV (E) grade cable for straight through heat shrink type joint complete with jointing materials and accessories suitable for 3 core XLPE armored Aluminium conductor cable of size 70 - 95 Sqmm and including preparation of burnt out HT cable complete all as specified and as directed.
Supply, jointing and testing of cable jointing kit for 6.6 KV (E) grade cable for straight through heat shrink type joint complete with jointing materials and accessories suitable for 3 core XLPE armored Aluminium conductor cable of size 240 - 300 Sqmm and including preparation of burnt out HT cable complete all as specified and as directed.
SCHEDULE 'A' PART-III (EXT WATER SUPPLY WORKS) Taking up/down CI/DI water mains of 200mm dia and connections / fittings of any type from trenches / walls / floors / (or any other location) for replacement /reuse in old / new location / diversion by burning out / removing of lead joints/tyton joints/rubber gasket joint complete all as specified and directed. (Note: Necessary earthwork, if any shall be measured and paid separately under relevant item.
Relaying of CI/DI water mains of 200mm dia after thoroughly cleaning, with new fittings fixed to wall / ceiling / floor or laid in trenches complete all as specified and directed.
Supply, laying, connecting and testing of ductile iron pipe 200mm dia, including specials with spigot and socket ends, class K-7 in standard working length conforming to IS-8329 laid in trenches/walls/floors with new fittings, complete all as specified and directed.
S&F DI bends of any bore (any type, radius and angle) taper any type (straight, bend, increasing, decreasing or double socket etc) tee pieces, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and as directed.
M&L for Tyton rubber gasket joint for 200mm CI/DI water mains, including necessary earth cutting work, complete all as specified and directed.
Taking up or down 80mm bore GI Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
Relaying/Re-fixing 80mm bore Galvanised Steel Tubing and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush, laid in trenches complete all as specified and directed.
Supply, Laying and testing 80mm bore Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, fixed on walls with FI clamps, complete as all specified and directed.
SUDHA ENTERPRISES
ESS PEE UDYOG
AUTO ELECTRICALS
SREE GURU CONSTRUCTION CO
KWALITY CONSTRUCTION
GAYATRI ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .