CERTAIN REPAIR TO COMPOUND WALL AND FENCING, PATH AND DRAIN UNDER AGE B/R-II OF GE(N) PATIALA AT PATIALA MILITARY STATION

Dismantling of Barbed wire fencing of any description and in any position complete all as specified.

Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion and making good disturbed ground (post embedded in PCC) complete all as specified.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as spd and directed.

Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil complete all as specified.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggt as in base of foundation, filling, mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggt as in foundation, filling, mass concrete complete all as specified and directed.

M&L for use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticla or to batter,surface finished fair complete complete all as directed.

S & F factory made Precast Eco-friendly designer wall having prestressed I shaped column of size 2400mm x 200mm x 200mm ,having flange thickness of 60 mm and web thickness 80 mm.The I shaped column will be placed on PCC sub base of size 750mm x 750mm x 100mm ,and grouted/embeded into a pit of size 600mm x600mm x 900mm using shuttering/formwork , having 4 mm thick high tensile tendom steel 10 nos in each column and precast prestressed panel have both side oval size design , as shown in drawing enclosed herewith and as directed by Engineer-in- charge.The size of designer panel shall be of size 3000 mm x 750 mm x 75 mm reinforced with 8 mm thick fe 500/550d grade TMT steel reinforcement bars in each panel incl total height of wall above ground level is 1500 mm. Panel and columns are made of high performance self compacting concrete (SCC) of M-40 design mix complete,All manufacturing process which comply with Indian Standards and use of automation for precise cutting, bending and welding of steel bars. The curing process must be maintained using RO water and chiller plants for quality assurance complete all as specified and as directed. Note: - (i) Crumple joint will be provided after every 5 panels and change in direction. (ii) Contractor to get the approval of precast factory within 15 days of commencement and all precast item will be supplied from single OEM to ensure the quality. (iii) Excavation post holes and PCC shall be measured and paid under separate item of works.(iv) Form work to foundation shall be measured and paid separately.(v) Refer para 32.1.9.1 (a to d) of particular specification for approval of precast factory .

Demolition of Concrete is reinforced of any description and in any position not otherwise specifically provided for.

S & F factory made precast U-shape drain lid perforated cover of size 1330 mm x 500 mm x 150 mm (thickness) used on drain, made with FE 500/550d grade TMT steel reinforcement bars in each unit which is made of high performance self compacting concrete (SSC) of M-50 grade, cured under controlled factory conditions with steam curing, having loading capacity of 5 ton wheel load. (heavy motor vehicle loading). All manufacturing process must comply with Indain standards and use of automation for precise cutting,bending and welding of steel bars. The curing process must be maintained using RO water and chiller plants for quality assurance. The formwork used for casting should be made automobile grade water tight steel enabling the production of highly accurate and consistent components. Concrete mix design of IS:9103 weight of each unit is atleast 250 kg, complete all as specified and directed as per Engineer-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specially provided for as in surface channel.

M&L for 75mm thhick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in Sub base finished even and rough complete all as specified and directed.

M&L factory made rubber moulded coloured chequered tiles 30cm x 30cm x 22mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 15 mm thick screed bed in 1:4 complete all as specified and directed.

M & L 60 mm thick machine pressed precast conctete interlocking paver block any shape with grey cement and no pigment and size confirming to IS 15658-2006 M-35 Grade over and incl 25mm thick sand cushioning complete all as directed by Engr-in-Charge.

M&L for providing and Laying Premium (1st) quality straight edge, ceramic tiles WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor, 8 to 10 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & pointed in matching colored polymer cement based grout to match including 15mm thick screed bed of CM 1:6 complete all as specified and directed by Engr-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed .

M&L rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces mixed with water proofing compound incl chajja, facia etc, finished the surfaces even and smooth without using extra cement complete all as specified.( WPC measured separately)

Material & Labour for preparation of new surfaces of wall and applying two coats of cement base paint complete in all respect as specified

Supply only liquid integral water proofing compound complete all as specified and as directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

Please Enable Macros to View BoQ information