GE(P) AF/GUR-14/2020-21

Amount

Demolition in cement concrete in any description and any position not other wise specified and provided as in ground floor and paving nexc. 15 cm thickness (below above ground floor) and removal of rubbish material outsite MoD land complete all as specified and directed by Engr-in-Charge.

Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc.complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster, any description on brick walls or on concrete surfaces including racking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and directed by Engr-in-Charge.

Dismantling of wall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured designer concept tiles matching with existing tile 600x300x7mm or 450x300x7mm 300x300x7mm size as in walls set and jointed in neat cement slurry over 10mm thick in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting / dado etc all as specified and as directed by Engr-in-Charge.

M&L for vitrified tiles 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 10 mm thick screed bed in cement mortar in 1:4, complete all as specified and as directed by Engr-in-charge.

S&F 16 to 18 mm thick granite (any type) in single piece upto 2.50mtr machine cut laid over CM screed bed 15 mm thick in cm 1:6 and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including mirror polishing and bull nosing edging in any position any shape etc all as directed by Engr-in-Charge.

M&L for 20-22 mm thick machine cut Kota stone slab of size 550mm x 550mm in flooring over cement screed bed 18-20mm thick in CM 1:6 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror polishing, complete all as directed by Engr-in-Charge.

M&L for providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for 100mm thick Cement concrete type B1 1:2:4 20 mm graded stone aggregate as in path finished even smooth with broom finished without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick in PCC 1:3:6 type C-2 using 40mm graded aggregate as in Plinth protection including 6x10mm grove in every 3Mtr including bitumen mastic filling complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick of brick work or concrete surfaces in CM 1:4 (Water proofing compund paid separtately) finished even and fair surfaces without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10 mm thick in cement motar 1:3 on ceiling on concrete surfaces, finished fair & even without using extra cement complete all as specified and directed by Engr-in-Charge.

Supply only water proofing liquid compoundcomplete all as specified and directed by Engr-in-Charge. :Make : DR. FIXIT PIDE PROOF LW, CICO, FOSROC.

M&L for Preparing Newly Plastered Surfaces of wall and applying Two coats of cement base paint over a coat of approved primer, complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparing new plastered surfaces of walls and applying two coats of oil emulsion distemper(Oil bound washable distemper) over a coat of chalk whiting, complete all as specified and as directed. by Engineer-in-Charge.

M&L for Preparation of new plastered surfaces of ceiling, and applying three coats of white wash on ceiling complete all as directed by Engr-in-Charge.

M&L for complete removal of existing treatment upto plastered surfaces including preparation of old decorated surfaces of walls and cornices and applying two coat of exterior grade acrylic emulsion paint over one coat of 1 to 2mm thick JK/cement base putty all as specified and directed by Engineer-in-Charge.

M&L for Preparation old decorated surfaces of ceiling , spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6, complete all as specified and directed by Engr-in-Charge.

All as per srl item No. 20 here in before but using old serviceable bricks obatined from srl item No. 2 above after cleaning etc complete all as specified and directed by Engr-in-Charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

S&F 10mm thick densified reqular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm including main 'T' runner of size 24x38mm made from 0.33 mm sheet hot deep galvanized steel section making good existing frame without disterbing the other false ceiling complete all as directed by Engr-in-Charge.

S&F 8 to 10mm thick densifed regular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm without disterbing the other false ceiling and making good existing frame complete all as specified and directed by Engr-in-Charge.

Demolition of old concrete over roof any thickness any position including old treatment from the roof complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 50 mm thick type B-1 1:2:4 (20mm graded crushed stone aggregate as in over roof pedding concrete finished fair even and smooth with using extra cement including using water proofing compound complete all as specified (water proofing compound paid separately).

M&L for applying evenly primer @ 0.3 ltr/Sqm and tack coat of industrial bitumen 85/25 ISI marked @ 1.2 kg/Sqm over clean plastered surfaces complete all as specified and directed by Engr-in-Charge. Note:- Cost of complete cleaning of roof surface shall be deemed to be included in quoted rate by contractor.

M&L for Appling one coat Bitumen water proofing aluminium heat resistance paint on the roof as per manufacture instructions complete all as specified and directed by Engr-in-Charge. Make : PLASCON/ PLASCON or equalant

M&L for 10mm thick cement sand plaster in CM 1:4, applying evenly primer @ 0.3 ltr/Sqm and laying of APP based polymeric membrane, 3mm thick weight not less than 3.0 kg/sqm reinforced with polyester non woven fabric membrane with end laps of the 10cm and side over laps of 7.5cm and sealing all overlaps & joints, complete, fixing membrane with thermofused the LPG flame and tack coat of industrial bitumen 85/25 ISI marked @ 1.2 kg/Sqm over clean plastered surfaces including taking down complete treatment with plaster complete all as specified & directed by Engr -in - Charge.

Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheets any thicknes in roof covering all as specified and directed by Engr-in-Charge.

S & F Asbestos cement sheet corrugated or semi corrugated 6mm thick fixed with L or J type GI hook bolts complete all as specified and directed by Engr -in -charge

S&F Asbestos cement 6mm thick in two pieces adjustable plain ridge fixed wirth l-type and J-type or cranked hook bolts complete all as specified and as directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth with 8% nickle 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

S&F PVC SHEET WALL PANELLING of thickness 5 mm consisting of panels of desired sixe stuck on inner frame work of 50mm wide strips of 5 mm thick Prelam PVC Sheet. The panel & strips shall be Manufactured by an ISO-9001-2008 certified Company. The strips should have in their center grove of 6 mm wide and 1 mm depth for sinking the head of the screw used to fix the strips to the wall vertially at an equal interval of 10" between two PVC strips. The PVC strips shall be fixed to the wall using 65 mm long MS Screws through the groove in the strips by using PVC fasterners. The distance between two screw shall bot be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strps of 5 mm thick PVC sheet of width 75 mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement all as specified including dismantling of existing and directed by Engr-in-Charge.

Supply and fix SFRC factory made drain cover/ man hole cover size 1200mmx600mm and 70 mm thick, with steel flat complete all as directed.

Dismantling mild steel work of any description not otherwise provided complete all as specified and directed by Engr-in-Charge.

S&F for MS angle iron as in posts, gate, door frame and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing with mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 (Gde-E-165 quality-B. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge.

S&F Steel work in tubular trusses, pillars and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS- 1161-1979 grade St.-240 all as specified and directed by Engr-in-Charge.

S&F in repair 0.5 mm thick pre coated thick galvalume aluminium zink coated GI based corrougated steel sheeting of any colour having tansile strength of 550 MPA as in roof covering/glading to wall fixed with self tapping screws, includng dismeteling of existing sheet complete all as specified and directed by Engr-in-Charge.

Supply only Chain link MS galvanised fencing, any size or type with 3.15/4 mm dia galvanised steel wire any size or type all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire and taking down existing fencing complete all as specified and directed by Engr-in-Charge.

S&F in repair Galvanized 2 stand Steel Barbed wire 2.24mm dia barbed with dia barbs at 75 mm spacing and straining and fixing to any type of stsnderd rails, straining bolts,including securing or tying at crossings with and provisuion of galvanised mild steel pins, etc incl taking down of existing barbed wire as directed (each line wire to be measured) complete all as specified and directed by Engr-in- Charge

S&F in repair 950 mm dia concertina coil reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/ Clips for tying at crossing complete including taking down of existing concertina coil complete all as specified and directed by Engineer–in-Charge.

S&F in repair 450/600 mm dia concertina coil reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/ Clips for tying at crossing complete including taking down of existing concertina coil complete all as specified and directed by Engineer–in-Charge.

S&F 1mm mild steel, plain black sheet hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required

M&L for Preparation of new steel surface exc 10 cm width/girth one coat red oxide primer and two coat synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft/ loose soil all as specified and directed by Engr-in-Charge.

Taking down Chowkhats or frames n exc 1.5 sqm each without taking of shutter from the frame complete all as specifed and directed by Engr-in-Charge.

M&L for 60mm thick outdoor quarry cobble tumbled granite for parking, lobby and path and similar works etc any colour and any size or design as approved by GE over and including 15 mm thick screed bed in cement mortar in 1:4, complete all as specified and as directed by Engr-in-charge.

Taking down shutter of any discription exc 1 Sqm n exc 2 Sqm each and refixing in the same opening after necessary minor repair all as specified directed by Engr in Charge.

Taking down shutter of any discription exc 2 Sqm and refixing in the same opening after necessary minor repair all as specified directed by Engr in Charge.

Taking down shutter of any discription n.exc 1Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any discription exc 1Sqm and n exc 2 Sqm each complete all as specified and directed by Engr-in-Charge.

S&F factory made second class Hardwood 35 mm thickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete complete all as specified and directed by Engr-in-Charge.

S&F factory made second class hardwood 35mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beaading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink wood primer all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint over one coat of pink wood primer all as specified and directed by Engineer-in-Charge.

S&F stain less steel bright polished bow handle solid type 150mm grip length fency type complete all as specified and directed by Engr -in -charge.

S&F stainless steel bright polished barrel tower bolt with plate with 10mm dia of shoot and 200mm long complete all as specified and directed by Engr-in-Charge.

S&F 100mm long medium grade stain less steel but hinges bright polished fix with nut and bolt complete all as specified and directed by Engr-in-Charge.

S&F 250mm long, 16mm dia stain less steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt all as specified directed by Engr in Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.

All as per item No 67 hereinbefore, but without galzing bars.

S&F 18mm thickness prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in repair complete as directed by Engr-in-Charge.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed by Engr-in-Charge.

S&F Glass corner shelf 8mm thick half round 20cm as bullnosing with 2 No S/S clips for fixing on walls all as per sample complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel floor door stopper with double rubber shoe, Make:-NTR, Cat No-HR-15 complete all as specified and directed by Engr-in-Charge.

S&F in replacement Sink with drainage board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as specified and directed by Engr-in-Charge.

S&F in repair Glass shelf 10mm thick tempered rounded moulded 450*200mm including fixing arrangement such as F bracket or SS clamps with fixing on walls all as per sample complete all as specified and directed by Engr-in-Charge.

S&F in repair, Mortice latch with two levers (vertical type), mild steel body and fixed (length of latch 100mm) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed all as specified and directed by Engr-in-Charge.

S&F in repair chromium plated Tubular towel rail 20 mm dia, D tpye, 60 cm long between flanges complete all as specified and directed by Engr-in-Charge.

S&F 500 Ltr Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed by Engr-in-Charge.

S&F 1000 Ltr Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed by Engr-in-Charge.

S&F, in repair angular stop cock, 15 mm dia fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or handle screwed both ends for iron pipe or for union complete all as specified & directed by Engr-in-Charge .

S&F in repair PTMT waste coupling 31/32mm bore of discharge (Half or full threaded) Min weight 45 gms, complete all as specified and as directed by Engineer-in-Charge.

S&F repair in of PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm bore , GI pipe medium grade with all fitting complete fiixed on wall, celling and floor complete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm bore , GI pipe medium grade with all fitting complete fiixed on wall, celling and floor complete all as specified and directed by Engr-in-Charge.

M&L for running welding and repair not exceeding 6mm mild steel work in frame structure, fencing, hold fast, rolling shutter, steel door pintel etc complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping cill, rounded or chamffered on edges complete all as specified and directed by Engr in Charge.

M&L for cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed by Engr-in-Charge.

S&F in repair 10ltr capacity PVC valveless syphonic action type flushing systern low level white with inlet ball valve ,float & handle including brackets complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement plate rack stainless steel made out of sheet not less than 1mm thick, size 30 inch 36 inches 10 inche with bracket all necessary fittings complete all as specified and directed by Engr-in-Charge.

Note:- The amount of Rs 128475/- against Schedule of Credit on Page No 134 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

PAWAN KUMAR

airstack india

M/S ujjwal associates