Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 LAccepted-AOC VILL LALPUR P O CHAKDAHA DIST NADIA PIN 741222 | CHAKDAHA | NADIA | WEST BENGAL | 741222 | ₹1.1 L | L1 | Accepted-AOC Being Lowest |
| 2 | L2₹1.2 LRejected-Finance | ₹1.2 L | L2 | Rejected-Finance Not acceptable |
| 3 | L2₹1.2 LRejected-Finance | ₹1.2 L | L2 | Rejected-Finance Not acceptable |
| 4 | L2₹1.2 LRejected-Finance | ₹1.2 L | L2 | Rejected-Finance Not acceptable |
| 5 | L2₹1.2 LRejected-Finance | ₹1.2 L | L2 | Rejected-Finance Not acceptable |
Tender Value
₹1.2 L
EMD Value
₹2,303
Closing Date
13 Mar 2026, 3:30 pmClosed
AE LALBAZAR
KOLKATA
Minor repairing and painting of the chamber of Addl CP II and Addl CP VI at of Main Bldg within the compound of Lalbazar Kolkata Police Hq PWD during the year 2025 2026
2026_PWD_1014877_1
WBPWD/AE/LB/NIeT-07/2025-2026
Open Tender
CIVIL WORKS
15 days
KOLKATA
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,303
Yes
11 May 2026
26 Feb 2026
16 Mar 2026
5 Mar 2026
13 Mar 2026
5 Mar 2026
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed
Dismantling all types of plain cement concreteworks, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.
Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge
Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification] [Mode of measurement:The affected surface area of reinforcement shall be considered for payment]
Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface).
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] 10mm thick plaster.(1:4)
15 mm thick plaster.(1:6)
Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge.b) 25 mm thick Same as Sl 2
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur variety
(b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) ii) Solvent based interior grade Acrylic Primer
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)ii) Luxury Quality
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc
(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (a) On timber or plastered surface(ii) Two coats (white in shade)
(b) On steel or other metal surface :
Please Enable Macros to View BoQ information
stage.html
html • 0.14 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.88 MB
WBF2911.pdf
Tender Documents • 0.53 MB
BOQ_2492881.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid