SPECIAL REPAIR TO BLDG NO P-100 AT AF STN KASAULI UNDER GE (AF) CHANDIGARH

Amount

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust and Brushing neat cement slurry with 3.0kg of cement per sq. metre,complete all as specified and directed by Engineer-in- Charge

Taking down shutters of any descriptions exc 1 sqm but n exc 2 Sqm each and refixing in the same opening after repair, complete all as specified and directed by Engineer-in- Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in- Charge.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in C.M 1:6 complete all as specified and directed by Engineer-in- Charge.

M&L for Non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade, complete all as specified and directed by Engineer-in- Charge.

M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. complete all as specified and directed.

M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in skirting etc set and jointed in neat cement slurry over 10 mm thick screed bed in cement mortar 1:3 and pointed in white/coloured cement to match the shade complete all as specified and directed by Engineer-in- Charge.

M&L glazed ceramic coloured/printed tiles 450mm x 350mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards(fibre pulp,insulation,etc)or insulation boards/slabs/blankets any thickness, including cover fillets and snap grid complete all as specified and directed by Engineer-in- Charge.

S&F, Metal suspended ceiling system OREO GI laid in plain 600X600X0.50 mm (tegular) edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. Note:(i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit at 1200mm maximum centre.The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600 mm mould.Cut cross tees longer than 600mm require independent support. 600X600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm,secured to walls at 450mm maximum centres. (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.50 mmx25/5 with soffit cleat made of galvanised steel of size 27x37x25x1.60mm & level clip in dimensions of 85x30x0.80 mm with 4mm GI wire complete all as specified & directed. Make : High steel,Armstrong & Dexune.

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings, complete all as specified and directed by Engineer-in- Charge.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as in rain water gutter.complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in- Charge.

M&L, Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

S&F Rolled mild steel sections as in posts, main and cross beams, hip and jack rafters; purlins, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. Conforming to Fe-290(GdeE-165), complete all as specified and directed by Engineer-in- Charge.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified.

S&F 110 mm PVC (SWR) bends any radius, complete all as specified and directed by Engineer-in- Charge.

S&F, PVC (SWR) reducers 110 mm complete all as specified and directed by Engineer-in- Charge.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for., removal of exccavated materila n exc 50 mtr and deposited where direcd at a level n exc 1.5 m above the starting point , complete all as specified and directed by Engineer -in-Charge.

M & L for Form work to chullah hoods, chajjas, troughs and similar items including edges flat and rough finished.

S & F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and directed by Engineer-in- Charge.

Material and labour RCC 1:1.5:3 type A-1 using 20 mm graded stone aggregate as chajja, fins, louvers, roof projection ,beam and lintel after removing of loose concrete and preparation of surface by application of derusting chemical such as Dr fixit rust remover or equivalent and welding additional main bars/distribution bars by inserting to adequate depth in beam by drilling , priming reinforcement bar old/new with a coat of anti corrosion Nitozinc primer of M/s FOSROC, including necessary scafolding as required height upto 3.5 Mtr, complete all as specified and directed. Note: 1. Rates include for necessary scafolding etc. 2. Reinforcement will measured and pid separately. 3. Notozince primer will be paid separately

Material and labour RCC 1:1.5:3 type A-1 using 20 mm graded stone aggregate as chajja, fins, louvers, roof projection ,beam and lintel after removing of loose concrete and preparation of surface by application of derusting chenicla such as Dr fixit rust remover or equivalent and welding additional main bars/distribution bars by inserting to adequate depth in beam by drilling , priming reinforcement bar old/new with a coat of anti corrosion Nitozinc primer of M/s FOSROC, including necessary scafolding as required height of 3.50Metre and upto heigth 8.00 Metre, complete all as specified and directed. Note: 1. Rates include for necessary scafolding etc. 2. Reinforcement will measured and pid separately. 3. Notozince primer will be paid separately

Material and labour for anti corrosive primer, Nitozinc of M/s FOSROC or equivalent Make/Brand as approved by GE, complete to old de-rusted reinforcement bars in chajjas all as specified and directed.

M& L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as in chajja, ceiling etc including two coats of Cement base paint on new serfaces. complete all as specified and directed by Engineer-in-Charge. Note: Height upto 8.0 Mtr

Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed by Engineer-in-Charge.

Material and Labour, Water Proofing Treatment to sunken portion of WCs, bathroom etc, complete all as specified and directed, comprising as under:- (a) Applying neat cement slurry @ 1.3 Kg/Sqm of surface, including wire brushing, cleaning, washihg and preparing roof surface & sides of walls. (b) 15mm thick plaster in Cement Sand Mortar (1:3) mixed with integral water proofing compound @ 2% by weight of cement on floor and wall, finishing the surfaces even and smooth without using extra cement. The surface shall then be cured and allowed to dry. Note : Supply only water proofing compound shall be measured and paid separately. (c) First layer of slurry of Cement @0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer will be allowed to air cure for 4 hrs. (d) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compount @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hrs.

M&L, PCC, 1:5:10 , type E-2 , using 40 mm brick coarse aggregate as in sunken portion, complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound

M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in floorings, as in sub base of floor tiles in ground floor, complete all as specified

supply and fixing 40 mm dia GI pipe , medium grade as in spout for sunken floor,fixed as in wall inside end fixed with wire netting and external bevelled edge at 45 degree, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level).

M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth using extra cement complete all as specified and directed by Engineer-in- Charge.

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in- Charge.

M & L 15 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed by Engineer-in- Charge.

Material and labour for 10mm thick rendering in cement mortar (1:3) on brick or concrete surfaces of ceiling finshed even and smooth without using extra cement ,complete all as specified and directed by Engineer-in- Charge.

M & L for 5 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces using WPC @ 3% by weight of cement over10 mm thick backing coat in cm 1:4 and finishing the surfaces even &smooth without using extra cement.(WPC will be measured and paid separately)

Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings , complete all as specified and directed by Engineer-in- Charge.

S&F 75 mm sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,laid in trenches or in floors complete all as specified

S&F 75 mm sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified.

S&F 100 mm sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,laid in trenches or in floors complete all as specified.

S&F 100 mm sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified.

S&F 100 mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

S&F CI Bends (any radius), diminishing pieces or tapers (larger bore measured) , 100mm bore, complete all as specified and directed by Engineer-in- Charge.

S&F CI Bends (any radius), diminishing pieces or tapers (larger bore measured) , 75 mm bore,complete all as specified and directed by Engineer-in- Charge.

S&F CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches suitable for 75 mm bore complete all as specified

S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement complete all as specified and directed by Engineer-in- Charge.

Disconnecting of geyser carefully and re fixing the same including all necessary fittings, complete all as specified and directed by Engr-in-charge.

Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store.

S & F PVC water storage tanks white colour of 500 ltrs capacity rotational moulded (tripple layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store

S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches, complete all as specified and directed by Engineer-in- Charge.

Refixing only 15 mm bore old steel tubing and conncetions in new or old position to walls.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store.

S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches, complete all as specified and directed by Engineer-in- Charge.

Refixing only 20 mm bore old steel tubing and conncetions in new or old position to walls

S&F in repairs Wash Hand Basin, Vitreous China (flat back or angle back type) of size 550 x400mm, including cutting for and pinning in ends of brackets or erecting stand, PTMT waste coupling, waste pipe complete MAKE-HINDWARE (1ST QUALITY), CERA (1ST QUALITY, FRORENTINE OF JAQUAR

Supply and fix brass CP fancy type piller tap,for wash hand basin screwed for iron pipe 15 mm bore,complete all as specified and directed.

Fixing in repair brass CP fancy type piller tap,for wash hand basin screwed for iron pipe 15 mm bore,complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white (excluding fixing bolts , flushing cistern and flush pipe) with plastic water closed seat black closed pattern with flat tottom and cover and mild steel chromium plated or aluminised hinging devices including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, complete all as specified and directed by Engineer-in- Charge.

Supply and fix, chromium plated steel jet pressure unit alongwith suitable size and of appropriate length PVC pressure pipe, fixed to EWC/ IWC, fixed as in repairs, complete all as specified and directed.

Taking down and re-fixing after necessary cleaning, bleaching, washing & changing minor parts as washers etc., 10 litre capacity low level flushing cistern, complete including PVC bend/ flush pipe, making all connection, fixed as in, complete all as specified and directed.

S&F in repair Fancy type 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F in repairs 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

Taking down & Re Fixing the same15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm,complete all as specified and directed by Engineer-in- Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm, complete all as specified and directed by Engineer-in- Charge.

All as per item No 68 above but area not exc 1.50 Sqm.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat mouleded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rain, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supling & fixing in the frame at site as per specification & drawing.

S&F Pressed steel frames for doors of size 125mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S & F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Cutting holes in brick wall built in cement mortar for inserting holdfasts, depth of embedded portion of holdfasts or lugs measured from the face of jamb into the wall exc half brick but not exc one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required.

Supply and fix, steel window box type, primer coated, comprising ERW Hollow `P’ section of size 60mmx25mm of 1.25mm wall thickness frame, single rebated, skeleton shutter (suitable for wire gauge), made of ERW section 50mmx20mm of 1mm wall thickness, and operated leaf side hung, without glazing bars but including Flat iron 12mmx03mm for securing wire mesh, dove tailed or welded/revitted welded to frame of shutter, and openable shutter prepared to receive wire gauge, complete , including cutting holes four Nos for each window and making good disturbed portion in PCC (1:3:6) type C-1, including following fittings welded to frame/shutter :- (a) Hold fast 150mm long out of 25x6mm flat iron made to shape - 04 Nos each window (02 Nos on each side). (b) Handle of `Z’ section 20x25mm, 100mm long - 01 No (each leaf). (c) MS tower bolt 150mm long - 02 Nos (each leaf). (d) `Z’ section 20x25mm, 100mm long stopper - 01 No (each leaf). (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 gauge wall thickness, welded to hinge of 55 mm size - 01 No (per leaf). (f) MS box type hinges of 75mm size - 03 Nos (per leaf). (g) Fabrication and fixing compete as per approval & drawing. Note(s) : (i) Wire gauge and painting shall be measured and paid separately under respective items. (ii) Design shall be approved from the Engineer-in-Charge as per Drg No CEAF/STD-185/2012 sheet 1/2 to 2/2 before fabrication and bulk order to the manufacturer.

Supply and fix, steel window box type, primer coated, comprising ERW Hollow `P’ section of size 60mmx25mm of 1.25mm wall thickness CRCA sheet frame, single rebated, skeleton shutter (suitable for glazing), made of ERW section 50mmx20mm of 1mm wall thickness, and operated leaf side hung, with two Nos glazing/sash bars of `T’ section 20x3mm welded to frame of shutter, prepared to receive glass, complete with one shop coat of zinc chorme or red oxide primer, including cutting holes four Nos for each window and making good disturbed portion in PCC (1:3:6) type C-1, including following fittings welded to frame/shutter:- (a) Hold fast 150mm long out of 25x6mm flat iron made to shape - 04 Nos each window (02 Nos on each side). (b) Handle of `Z’ section 20x25mm, 100mm long - 01 No (each leaf). (c) MS tower bolt 150mm long - 02 Nos (each leaf). (d) `Z’ section 20x25mm, 100mm long stopper - 01 No (each leaf). (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 gauge wall thickness, welded to hinge of 55 mm size - 01 No (per leaf). (f) MS box type hinges of 75mm size - 03 Nos (per leaf). (g) Fabrication and fixing compete as per approval and drawing. Note(s) : (i) Glazing and painting shall be measured and paid separately under respective items. (ii) Design shall be approved from the Engineer-in-Charge before fabrication and bulk order to the manufacturer(s) as per Drg No CEAF/STD-184 of 2012, sheet 1/3 to 3/3.

Supply and fix, factory made box type steel section ventilator, with box type section double leaf shutter for glazing and wire gauze with pintol hinges, 01 No 150mm long Mild Steel tower bolt, steel handle to each shutter (steel handle dovetailed or welded), and with one shop coat of red oxide / zinc chromate primer, complete all as specified and shown in drawing duly fitted with all fittings , welded to frame/shutter including cutting holes for hold fasts & making good in PCC 1:3:6 Type C-1. Note(s) : (i) Wire mesh & glazing shall be measured and paid separately. (ii) Design shall be approved from the Engineer-in-Charge before fabrication and bulk order to the manufacturer(s) as per Drg No CEAF/STD-186/2012, sheet 1/1.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm etc all as specified.

S & F mild steel bands, straps, clamps, hold fasts, wall ties and similar articles conforming to Fe-310-0,complete all as specified and directed by Engineer-in- Charge.

S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed.

200 mm long aluminium anodized barrel tower bolts of extruded section and fixed in repairs, complete all as specified.

S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised, complete all as specified.

S&F, Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia, 100mm size, complete all as specified and directed by Engineer-in- Charge.

S & F in repair aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in- Charge.

S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.complete all as specified and directed by Engineer-in- Charge.

S&F fixed in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples.

M & L for preparing new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-in- Charge.

Material and labour for preparation of old surface of wood and wood based materials over 10 Cm width or girth and applying one coat of synthetic enamel paint as directed and specified.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces,complete all as specified and directed by Engineer-in- Charge.

M & L for applying one coat of synthetic enamel paint to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of old steel surfaces,complete all as specified and directed by Engineer-in- Charge.

M&L for preparation of new cement plaster surfaces and applying two coats of oil bond distemper over a coat of primer all as specified & directed.

Complete removal of existing treament from wall surfaces by wire brushes & stopping of surfaces & leveling/edging the disturbed surface /edges using 1.0 mm thick filling compound of birla/Jk wall care putty to obtain smooth regular /even finish using sand paper and applying two coats of oil bound distemper over a caot of alkali resistant primer, complete all as specified and directed by Engr -in-Charge.

M & L for preparation of old plastered or unplastered surfaces of ceiling including cornices and applying two coat of white wash on old decorated surfaces, Complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old plastered or unplastered surfaces of walls including cornices and applying two coat of white wash on old decorated surfaces, Complete all as specified and directed by Engineer-in-Charge.

Preparing newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed by Engineer-in- Charge.

Material & labour, preparation of new (plastered or unplasterd) surfaces of walls including brooming down, washing, rubbing down using sand paper, stopping distrubed surfaces, planes/edges with white cement putty & rubbing with sand paper to obtain regular and smooth surfaces, and applying two coats of exterior acrylic emulsion anti weather & anti algae paint (1st quality paint), in disruptive pattern (camouflage) using number of colours as approved, over and including a coat of alkali resistant primer, complete all as specified and directed. Note (s): (i) Pattern of camouflage shall be as approved by GE. (ii) Rate quoted by contractor shall be deemed to include the cost of use and waste of necessary ladder, wooden platform etc,. as may require to execute work at any height upto 8.00 metre. (iii) Painting work shall stand guaranted against fadding/Peeling off for 05 years & the cost agaist this aspect, shall be deemed included in the unit rate quoted for this item.

Material and Labour, 20 mm thick Granite (of any type) work (table rubbed and polished) in treads/steps, window-cills, cooking platform and like, set in neat cement slurry @ 3 Kg/Sqm including pointing in white cement mortar (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and ditected.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations,complete all as specified and directed by Engineer-in- Charge.

S & F 5.5 mm thick, Figured glass, pin head fixed in aluminium frame as in windows/ventilators, complete all as specified.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified.

Excavation in trenches in hard dense soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or shafts, wells, cesspits, manholes, pier holes etc and getting out complete all as specified.

Returning , filling in, including spreading, leveling, watering and well ramming in layer n.exc 25cm depth in layer complete all as specified.

Removal excavated materials to distance n.exc 50 metre and depositing where directed at a level n.exc 1.5metre above the starting pointing in soil, complete all as specified.

Demolition of SGSW drain pipe of any bore with PCC bedding/hunching cradle jointed in cement mortar and taking out of trenches if required with fittings all as specified.

M&L cement concrete (1:4:8) type D-2 using 40mm stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe

M&L Reinforced concrete pipes, class NP2, 100 mm dia laid and jointed complete with collars laid in trenches and jointed in cement mortor as specified.

S&F, Door seal wih PVC body & fitted with rubber seal, complete all as specified and directed by Engineer-in- Charge.

S&F in repairs Fibre glass reinforced translucent corrugated sheeting 2mm thick in thickness with two corrugation side lap fixe with L type or J type hooks bolts all as spd and directed.

S&F in repair PVC valve less, symphonic action type flushing cistern, low level white including inlet, ball valve, float handle including brackets of 10 ltrs capacity including flush pipe complete all specified and directed by Engineer-in-Charge.

M&L, II nd class Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F, Prelaminated particle board, interior grade, prelaminated both side (18 to 19mm thick) with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,complete all as specified and directed by Engineer-in- Charge.

S&F Extruded Aluminium alloy handles, fabricated type anodised of 75mm long size, complete all as specified and directed by Engineer-in- Charge..

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. 25 mm dia with brackets etc complete all as specified and directed.

Taking down carefully aluminium/copper point wiring (light/fan/socket/ power) complete including fittings such as switches, sockets, ceiling roses pendents, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall all as specified and directed by Engineer-in- charge

Taking down unserviceable any type of Main Switch, industrial sockets, DB's including MCBs incl wooden/GI/MS sheet board,removing the materials/debris and making good the disturbed surfaces of wall, floors and ceiling etc. to match with the original existing finish all as directed etc all as directed.

Taking down carefully copper/Aluminium submain wiring of any size/core/type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of wall, floors and ceiling etc. to match with the original existing finish all as directed

Taking down unservicable light fittings any type all as directed.

Taking down ceiling fan/exhaust fan of any capacity.

Point wiring with approved colour coding as per IS with multistranded copper conductor 1.5 Sq mm (nominal area), single core, flame retardent low smoke (FRLS), PVC insulated and un sheathed cable 1100 Volts grade, ISI 694 marked TEC and FIA approved in and including PVC concealed conduit medium grade, suitable for light/bell/fan point terminated in and including mild steel terminl boxes covered with new 3 mm thick HYLAM Make plastic laminated sheet and controlled by one switch including flame retardent low smoke (FRLS) PVC insulated un sheathed multistranded copper conductor 1.5 Sq mm (nominal area)single core cable as earth continuity conductor to common earth and connected to earth dolly , complete all as specified and directed. Note :-The cost of making good to the disturbed surfaces to match with the adjacent surfaces shall be deemed to be included in the quoted rate.

One light point controlled by one switch one way

One ceiling fan/exhaust fan point controlled by one switch one way

One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq.mm size

One light point controlled by two 2 - way switches , with cables 1.5 sq. mm size

All as per item No 123 here in before but with cable size 1.5 Sq mm for one 3 pin 5 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed by Engineer-in-Charge.

All as per item No 123 here in before but with cable size 4 Sq mm for one 3 pin, 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed by Engineer-in-Charge.

S & F switch piano flush type 5 amps single pole one way, all as specified and directed by Engineer-in-Charge.

S & F switch piano flush type 15 amps single pole two way,all as specified and directed by Engineer-in-Charge.

S & F switch piano flush type 15 amps single pole one way

Supply and fixing switch bell push flush type 05 Amps (230 volts) , complete all as specified and directed.

Supply and fix, in replacement of bell, single phase 230 volts, AC, 50 Hz (domestic pattern) , complete , all as specified and directed.

S & F in repairs socket outlet 3 pin, 5A, flush type.

Supply and fixing socket outlet, flush type, multi purpose multipin , 2 in one 3 pin, 5 Amps & 15 Amps, 230 volts, complete all as specified and directed.

S & F ceiling rose surface bakelite two to three terminals,complete all as specified and directed by Engineer-in- Charge

S & F MCB SP 6 to 40 Amps 240 Volts, 'B curve' all as specified and directed by Engineer-in-Charge.

S & F MCB SPN 40 Amps 240 volts all as specified and directed by Engineer-in-Charge.

S & F MCB DB SPN double door 12 way sheet metal enclosure SPN 240 V 50 Hz horizontal with IP-20 degree protection complete all as specified and directed.

S & F in repairs MCCB 4 pole,415 volt,fixed type, 100 amps with breaking capacity 35 KA, all as specified and directed by Engineer-in-Charge.

Supply and fixing ,LED Decorative batten fitting 1x18 to 22 W, prewired suitable for retrofit LED tubes , prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable surface mounted fitting of any wattage and type , complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair LED tube rod 20 watts ( retrofit LED tube ) ,energy saving ,recess / surface mounted luminaire suitable for fix in the batten fitting 1x18W to 22W, complete all as specified and directed.

S & F in repairs LED light fitting, 9 to 15 watt attractive wall/ceiling mounted type complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Material and labour, earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground vertically with top edge of earth plate not less than 1.5m below normal ground level (depth of pit not less than 2.25m below normal ground level), earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, electrode connections using galvanized iron wire of 4mm dia (8SWG) by means of GI bolts, nuts, check nuts & GI washers and other end of earth lead connected to main switch board or main control board or test point or equipment, earth lead protected by galvanized iron pipe light grade (ISI marked) 20mm bore, alongwith watering pipe 20mm bore GI medium grade (ISI marked of specified make), funnel with wire mesh including all necessary excavation & earth work, PCC chamber in PCC (1:2:4) type B-1 & RCC cover (in lieu of CI cover), all as shown in electrical plate No 3 of MES Schedule Part-I (2009), testing on completion, complete all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC Chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 5 Ohm, In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt.

M & L for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed copper conductor of nominal cross sectional area 2.5 sqmm as earth continuity conductor drawn through PVC conduit concealed as reqds size confiming to IS: 9537(Part-3), including accessories fixed on wall/ceiling all as directed including making good of disturbed surfaces area. Note : 2 runs of 6 sqmm & 01 run of 2.5 sqmm will be measured as one unit.

M & L for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed copper conductor of nominal cross sectional area 2.5 sqmm as earth continuity conductor drawn through PVC conduit concealed as reqds size confiming to IS: 9537(Part-3), including accessories fixed on wall/ceiling all as directed including making good of disturbed surfaces area. Note : 2 runs of 4 sqmm & 1 run of 2.5 sqmm will be measured as one unit.

Supply and fix in replacement LED luminaires,1x 10 Watts with IP-65, & heat resistant for exterior application prewired internally complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs lamp holder, PVC/poly carbonate type with back plate suitable for batten fittings.

S & F in repairs LED channel 10 watts with suitable for accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fix, in replacement of ceiling fan regulators step type electronic for 1200/1400 mm sweep ceiling fan and connecting up complete with provision of PVC flexible cable size 1.5 Sqmm twin core copper conductor , complete , all as specified and directed.

Supply and fixing, in replcement factory made sheet metal enclosure single pole & neutral with a two pin & earth plug and socket etc complete with provision for one single pole 'B' series MCB 20 Amps 240 Volts, all as specified and directed.

Supply and fix in repairs LED 7 watt bulb complete all as specified and directed.

Hanging only ceiling fan/exhaust and connecting up including provision of cable from ceiling rose or connector to fan.

S & F MCB SP 6 to 40 Amps 240 Volts, 'C curve' all as specified and directed by Engineer-in-Charge.

Note:- Amount of credit of Rs. 83745.00 for retrieved materials is mentioned in Schedule of Credit Page No 110 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Vinod Kumar Aggarwal

Azurite Engineering