Repair to joinery,roof treatment and allied works under AOR of AGE B/R-II of GE (East) Fzr Cantt

Amount

Dismantling of brick tiles or terracing tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and directed

Dismantling brick tiles laid in double layer jointed & pointed in cement mortar including removal of grass vegetation complete all as specified and directed

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc; under 40 sq. cm in each section, fixed in any position as in framed work complete all as specified and directed

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Conforming to 8e-910-w (Gde E-250) quality A, complete all as specified and directed

Demolition mud in roofs, any thickness, including plastering and leeping etc complete all as specified and directed

Roughening surfaces of old concrete floor/ roof for removing old bitumen coat/ any other type of treatment etc., by picking, sweeping clean and washing down with water to remove dirt/ dust etc complete all as specified and directed

M&L for rendering 10 mm thick cement plaster on roof surfaces in cement mortar (1:4) complete all as specified and directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.5 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.

M&L for polythene film, 150 micron thick, laid on roofs with 150 mm overlaps complete all as specified and as directed.

M&L 80 mm thick average consolidated thickness mud phuska on flat roofs including 25 mm thick mud plaster and 3 mm thick leeping plaster etc complete all as specified and directed

M&L 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement, on mud phuska complete all as specified and directed

All as per srl item No 11 above but using old brick tiles retrieved from dismantling including cleaning and removal of mortar from tiles complete all as specified and directed

Racking out joints/ pointing to brick work or brick tiles,laid flat in floors,surface channels,roofs etc. work built in cement mortar complete all as specified and directed

M&L flush pointing to brick laid flat or brick tiles in roofs and paving in cement mortar (1:3) complete all as specified and directed

M & L PCC (1:2:4) type B-O using 12.5mm graded crushed stone agg as in haunching ,kerb in roof or similar work complete all as specified & directed.

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed

M&L preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk whitening primer on walls. complete all as specified and directed

Preparation of new surfaces of wall and applying two coats of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as specified and directed

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed

All as per item 22 above but using old bricks retrieved from dismantling including cleaning and removal of mortar from old bricks etc complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm but n.exc 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each or complete all as specified and directed

S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint ccomplete all as specified and directed

S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and directed

M&L for PCC (1:3:6) type C-1 using 20 mm graded crushed stone agg .as in filling steel frames etc including necessary form work complete all as specified and directed

Material and labour for PCC (1:2:4) type B1 with using 20 mm graded crushed stone agg as in bed block hold fast block complete all as specified and directed

S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified and directed

S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed

S&F 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and directed

S&F 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and directed

S&F for 300 mm Mild Steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed

S&F in Repair 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed

M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; on either side & as gap insert for top rail;panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed

S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified Make Prayag/Polytuf or equivalent make as approved by GE.

S&F factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed

S&F factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed

S&F factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and directed

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each complete all as specified and directed

S&F 4.00 mm thick figured glass pin headed type, and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed

S&Fstainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel over primed surfaces complete all as specified and directed

S&F framed work such as grills,gratings etc with end of bars shouldered and/ or riveted,or forged into spikes; framed guard bars;barred iron doors;ladders; framed balusters; walk ways;railings; frame work of water tanks and similar work con-forming to Fe-290.Gde-E-165 complete all as specified and directed

S&F in repairs decorative mild steel coloured curtain rod of 20 mm dia PVC coated approved pattern & design including side cups, powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs, complete all as specified and as directed

Dismantling timber in fillets, rails, posts, rafters, purlins, etc; under 40 sq. cm in each section, fixed in any position as in framed work complete all as specified and directed

S&F Framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed

Dismantling boarding, any description,, fixed in any position with screws complete all as specified and directed

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed

S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate with screws and fixed complete all as specified and directed

S&F Mild steel butt hinge, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed

S&F in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed

S&F PVC (SWR), junction double, (double T), equal or unequal 110 mm complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed

Material & labour for Glazed ceramic coloured tiles in vertical surfaces 300X200X7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces complete all as specified and directed

Material & labour for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed

Material & labour for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed

All as per Item No-66 above but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and directed

M/S Yashpaul Gulati

Sethi and Company

Marwaha Builders

ABHISHEK AND COMPANY

S.R. Kaura and Company

RAKESH KUMAR SATISH KUMAR

M/S Sandhu Const.Co.