Loading…
Loading…
Tender Value
₹2.1 Cr
EMD Value
₹4.1 L
Closing Date
30 Jun 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIG WORKS
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. As per Clause No. 10.2 of Tender Form (second Sheet) of Annex.I of Part-I of GCC2022,updated as per RB Letter No.2022/CEI/CT/GCC2022/Policy Dated-14.07.22 with up to date correction slip.
a) The tenderer must have successfully completed or substantially completed anyone of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges substructure, superstructure etc.), tenderer must have successfully completed or substantially completed anyone of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Signal & Telecom Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub-letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Signal & Telecom Engineer in writing. Note for Item 15.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Meaning of similar works:" Any Signalling Work OR Any Telecom Work "
6 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall submit an undertaking at the time of bidding stating that: "Authorization from the OEM of the AFDAS system for Supply, Installation, Testing, Commissioning, and post- commissioning support of the AFDAS system shall be submitted before the supply of materials. The authorization shall confirm compliance with the applicable RDSO guidelines and contract- specific requirements for ensuring trouble-free working of the installed AFDAS system." Non-submission of the above undertaking shall lead to summary rejection of the bid. Note: The successful tenderer shall submit the OEM's authorization before the supply of materials to ensure trouble-free working of the installed AFDAS system and to confirm compliance with the applicable RDSO guidelines and contract-specific requirements.
Ajmer Division: Provision of Automatic Fire Detection and Alarm System (AFDAS) at Independent Interlocked LC gates over Ajmer division
SNT-AII-19-2026-27
SNT-AII-19-2026-27
Open
Works - General
180 Days
Ajmer, Rajasthan
₹0
₹4.1 L
30 Jun 2026
3 Jun 2026
16 Jun 2026
50 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,01,73,833 | ||
| — | 45.00 | — | — | ||
| Supply, installation testing and commissioning of Heat and smoke multi sensor as per RDSO/SPN/217/2025 ver-3.1 or latest. along with its base, back-box and all accessories incompliance with IS:2175 and IS:11360 standard sand Under writers Laboratory (UL) listed. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution. | — | — | — | 2,82,420 | |
| — | 15.00 | — | — | ||
| Supply, installation, testing and commissioning Fault isolator as per RDSO/SPN/217/2025 ver-3.1 or latest with backbox and all other accessories Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution. | — | — | — | 90,780 | |
| — | 1500.00 | — | — | ||
| Supply of Analogue linear heat sensing (LHS) cable as per RDSO/SPN/217/2025 ver- 3.1 or latest Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply. | — | — | — | 21,30,000 | |
| — | 1500.00 | — | — | ||
| Supply of Fire survival cable 2x1.5 sq.mm unarmoured as per RDSO/SPN/217/2025 ver-3.1 or latest Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply. | — | — | — | 2,41,500 | |
| — | 15.00 | — | — | ||
| Supply, installation, testing and commissioning of Networkable s i n g l e loop addressable Fi r e alarm Control panel expandable up to 4 loops with GSM interface as per RDSO/SPN/217/2025 ver-3.1 or latest. This work involves supply, fixing, installation and testing of control panel. The control panel shall be networkable t o Zonal /Divisional headquarters preferably over TCP/lP and shall have clock synchronization facility. This includes Networking module (TCP/IP) for control panel along with power supply unit and battery set of required capacity for 24 hours backup as per RDSO specification. The panel should support degrade mode operation in compliance with IS: 2189, EN54 standards and Underwriters Laboratory (UL) listed. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution. | — | — | — | 31,52,340 | |
| — | 11.00 | — | — | ||
| Supply, installation, testing and commissioning of GSM module for Control panel with backbox and all other accessories as per RDSO/SPN/217/2025ver- 3.1 or latest. with auto dialer function to SMS during failure or fire situation. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution. | — | — | — | 3,76,035 | |
| Supply, installation, testing and commissioning of Manual call point (resettable) with backbox and all other accessories as per RDSO/SPN/217/2025ver-3.1 or latest Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution. | — | 15.00 | — | — | |
| — | 15.00 | — | — | ||
| Supply, installation, testing and commissioning of Relay module with backbox and all other accessories as per RDSO/SPN/217/2025 ver-3.1 or latest. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution. | — | — | — | 65,490 | |
| — | 16.00 | — | — | ||
| Supply, installation, testing and commissioning of Hooter and Visual strobe alarm units with backbox and all other accessories as per RDSO/SPN/217/2025 ver-.3.1 or latest along with its power supply unit. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution. | — | — | — | 2,33,712 | |
| — | 15.00 | — | — | ||
| Supply, installation, testing and commissioning of Control module with backbox and a l l other accessories a s p e r RDSO/SPN/217/2025 ver-3.1 or latest. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution | — | — | — | 84,165 | |
| — | 16.00 | — | — | ||
| Supply, installation, testing and commissioning of EOL as per RDSO/SPN/217/2025 ver-3.1 or latest as directed by the site engineers Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution | — | — | — | 55,824 | |
| — | 16.00 | — | — | ||
| Supply, installation, testing and commissioning of Monitor module for 3rd party with backbox and all other accessories as per RDSO/SPN/217/2025 ver-3.1 or latest. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution | — | — | — | 57,376 | |
| — | 10.00 | — | — | ||
| CO2 Fire Extinguisher: Supply, installation, testing and commissioning of CO2 fire extinguisher 6.5kg capacity conforming t o IS15683 w ith I S I mark provided with all fittings and accessories. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution | — | — | — | 2,52,670 | |
| — | 1500.00 | — | — | ||
| Supply of Fire survival cable 2x 1.5 sq.mm armoured as per RDSO/SPN/217/2025 ver- 3.1 or latest. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply. | — | — | — | 1,90,500 | |
| — | 15.00 | — | — | ||
| Supply of aspiration-type smoke detector. Highly sensitive smoke aspiration system for monitoring of rooms and equipment for earliest possible fire detection For Relay rooms a s per RDSO spec. No. RDSO/SPN/217/2025 ver3.1or latest. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply | — | — | — | 94,62,645 | |
| — | 10.00 | — | — | ||
| Supply and Installation of Air Sampling CPVC Pipes with all required accessories for the Aspiration System. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution | — | — | — | 25,76,480 | |
| — | 11.00 | — | — | ||
| Supervision, Programming, Installation, Testing and Commissioning o f Aspiration Smoke detection Supplied. | — | — | — | 7,94,332 | |
| — | 19.00 | — | — | ||
| Automatic Fire Ball for Fire-Extinguishing of Medium size - the weight of the agent is not less than 1.0 kg but less than 1.8kg. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply. | — | — | — | 7,429 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
SNT-AII-19-2026-27AFDASATLCGATE.pdf
ATTACHMENT
SNT-AII-19-2026-27AFDASATLCGATE.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .