COMPREHENSIVE REPAIRS / REPLACEMENT TO VARIOUS B/R RELATED ITEMS IN VARIOUS MD ACCN IN WING II AND V AT ARTY CENTRE UNDER GE NASIK ROAD.

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sqm each and making good the jambs, soffits of lintels etc. after fixing of new chowkat or frame to match the existing surface.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each and making good the jambs, soffits of lintels etc. after fixing of new chowkat or frame to match the existing surface.

Taking down shutters of any description exc 1 Sqm and n. exc 2 Sqm each.

Taking down shutters of any description exc 2 Sqm each.

S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F aluminium (minimum 50 micron powder coated) window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified.

Supply and fixing 4.8 mm thick ordianary quality sheet glass exe 0.5 sqm in each pane of glazing with oil putty /beading etc all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F Providing precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, Kerb stones etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match with CM 1:6 complete all as specified and directed.

S&F Framed work as in grill, doors or gates of angle or other section with gusset plates, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe Grade 290(Gde E-165) complete all as specified and directed by Engr-in-Charge.

M&L for 2nd class hardwood for Plain,solid,straight chowkhats and frames,framed rebated on the solid,rounded or chamfered,put together with glue pinned at,complete all as specified and directed.

M&L for 35mm thick second class hard, wood factory, made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified

Preparing new wood or wood based surfaces over 10cm width or girth and two coats of synthetic enamel paint over and including a coat of pink primer.

S&F Brand factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 63mm x 51 mm ( Moulded ) Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min.990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and lenght, all as per specifications drawings as directed by the Engineer-In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F Brand Factory Made 25mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N (Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F staineless steel butt hinges 100mm size medium weight complete all as specified and directed

S&F stainless steel tower bolt 150 mm long complete all as specified and directed (Note: sample will be approved by Engineer-in-Charge)

S&F 150 mm stainless steel handels complete all as specified and directed (Note: sample will be approved by Engineer-in-Charge)

S&F Stainless steel sliding door bolts,250 mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

Supply and fixing floor door stopper 150mm length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer-in-Charge.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar, for inserting holdfast and making good dismantled portion in cement portion depth of embeded portion of 1:3 or cement concrete 1:2:4 Type B1 as required

All as per item No. 22.00 above but in Stone walls.

Dismantling wooden boarding, any description fixed in any position with nails.

S&F in repairs 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work or brick wall incl necessary beading, fillets and lipping complete all as specified and rectified.

S&F continuous (Piano) hinges MS bright finish electro galvanized – 30mm width of flap.

S&F staineless steel butt hinges 50mm size medium weight complete all as specified and directed

S&F in repair brass 40mm dia cupboard knob fixed with nut, screwed and washer polished.

S&F Hasp & staple aluminium anodised safty type of 100mm length

S&F Brass helical / ordinanry rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding all as specified ( ISI Marked )

M&L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out of MOD land and rubbish off the premises

M&L for Non - skid coloured ceramic 7 to 8 mm thick (square/rectangular) tiles exceeding 0.18 sqm but not exceeding0.38 sqm each, in floors ,skirting etc. laid over and including 15mm thick cement mortar screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L for Colour Glazed ceramic joint free tiles in vertical surface 350 x 250 x 7mm / 450 X 350 X 7mm thick, laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L for Double charged vitrified ceramic tiles (any shade (light/dark) 8 to10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and painted in white or coloured cement to match.Note : Shade will be deciced by Engr-In-Charge

M&L for Screed bed or bedding layer of mortar 15 mm in cement mortar 1:6 thick for laying floor finishes.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/hard standing.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) in sub base of flooring/hard standing.

Demolition of Cement Concrete of any description in ground floor & paving n.exc. 15 cm thick(below or above ground level)

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar.

M&L for Granite (of any type) work 20mm thick machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)

Dismantling of wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets including removal of Debries outside Cantt area complete all as specified and directed by Engineer-in-Charge.

S&F interlocking aluminium powder coated snap grid consists of main Tee runner of size 38mm x 25mm x 1.00mm spaced 1200mm centre to centre and cross Tee size 25mm x 25mm x1 mm 1200 mm long spaced between the main Tee at 600mm centre to cente to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm. Aluminium alloy extruted section shall be aluminium anodized (minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737 providing and fixing with Hangers of 4mm dia GI (upto 1200mm lengh) adjusting level fixed to roof slabs by means of cieling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600mm x 600mm complete all as specified and directed by Eng-in-charge.

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to trimber/ GI/ aluminium frame, fixed in ceiling .

Dismantling Plain or corrugated steel sheeting of any gauge,thickness,including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F rolled mild steel joist, channel, angle, flat section fixed independently without connecting plates or MS tubular sections etc (cut to ordinary length i.e. within 20mm length indicated) grade Fe 410-W (E 250) all as directed by Engr in Charge

S&F steel work in tubular pipes as in Purlins, Rafter etc. including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 Grade St-240 complete all as specified and as directed.

Preparing new untreated steel or iron surfaces over 10cm width or girth and and two coats of synthetic enamel paint over and including a coat of red oxide.

S&F Prepainted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/cladding to wall,fixed with self tapping screw complete all as specified and as directed. Gap between wall face and sheet if any shall be sealed using CM 1:3 with WPC.quoted rate deems to be inclusive of the same.

S&F Prepainted Galvalume aluminium zinc coating GI based Plain sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/cladding to wall,fixed with self tapping screw complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in hard /dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate ) in foundation for post holes.

M&L for filling of gap portion of gable wall with PCC (1:3:6) type C1 of any height with suitable arragement of shuttering & formwork all as specified and directed by EIC.

M&L for fixing in repair 25 mm matt finish Stainless steel curtain rod best quality as approved by Engr-in-charge.

M&L for fixing in repair Stainless steel socket bracket with bore of 25mm for dead end of curtain rod .

M&L for fixing in repair Stainless steel ornamental piece with bore dia of 25 mm for free end of curtain rod .

S&F in repair Vitreous China water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and P/S trap (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets complete all as specified and directed. Specification of flushing cistern shall be as per IS 7231-1994.

S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. over and including flush pipe complete in all respect all as specified.

S&F in repairs Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs. Note : wash basin shall conform to IS 2556(part-4)-2004.

M&L for PVC (SWR) floor trap(75 mm dia), plain with grating including jointing with solvent cement to mitigate the site requirement to the entire satisfaction of engr-in-charge.

Taking up or down steel tubing and connections 15mm bore including bib taps, stop cock etc.

Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.)

S&F 15mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

Taking up or down steel tubing and connections 20mm bore.

Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.)

S&F 20mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S&F 15mm bore bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair.Specification of bib tap as per SSR Part-I.

S&F in repair hand shower (Health faucet) 1 Mtr PVC tube with wall hook (CP) complete all as specified and directed.

S&F CP fency type wash basin Swan neck tap cold water scrwed down for iron pipe and 15 mm bore fixed in repair.(make : Jaquar and equivalent)

S&F Brass CP wall mixer for mixing hot and cold water, screwed down for iron pipe 15mm bore and fixed in repairs.(make : Jaquar and equivalent)

S&F in repair 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.The specification of fancy pillar taps shall be as per SSR Part-I.

S&F in repairs 15 mm bore stop valves, cast copper alloy, fancy type, chromium plated (angle type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.The specification of stop valves shall be as per SSR Part-I.

S&F in repairs Angle cock 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm including fittings.

S&F Brass chromium plated shower rose 125mm size with swivel joint, including fixing to steel pipe or union 15mm bore.

Dismantling water tanks exc 500 & n exc 1000 ltr capacity and removing to store.

S&F Rotational moulded polye thylene water storage double layer (Capacity 500 Ltr) tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified in SSR Part I.

S&F Rotational moulded polye thylene water storage double layer (Capacity 1000 Ltr) tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified in SSR Part I.

S&F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) fixed in repairs.

S&F in repairs Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. Note: SS sink shall be manufactured from Salem Stainless steel grade A1 S1 305

Taking down AC rain water pipes(any size or pattern) including all fittings,head shoes,bends,swan neck etc.

S&F PVC (SWR) pipes110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F in repairs of PVC(SWR) bends of 75 mm dia and making good

All as per Item No. 89.00 above but size of 110 mm dia.

Taking down cement plaster on brick or stone wall or ceiling etc including raking out joints hacking for keys scrubbing down with water etc.

M&L for rendering 15 mm thick cement mortar on brick/stone surfaces with cement mortar 1:6 finished of internal walls finished even and smooth without usung extra cement

M&L for rendering 15 mm thick in CM 1:4 on stone masonary or brick masonary surfaces finished even and smooth with using extra cement

M&L for rendering 05 mm thick (1:3) on fair faces of concrete surfaces incl preparation to new surfaces on ceilings finished even and smooth without using extra cement

M&L for preparation of newly plastered surface of ceiling and applying two coat of oil bound distemper over a coat primer complete all as specified

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls over a coat of primer

M&L for preparation of new plastered surfaces of wall applying two coats of cement based paint on wall over a coat of primer

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 44450.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Alpha Construction (BID ID -3334905)

M/S MK Nair (BID ID -3335136)

M/S K. K. Construction (BID ID -3335285)

Srujan Associates (BID ID -3332979)

Vishal Constructions (BID ID -3335196)

Abhiraj Enterprises (BID ID -3335566)

SVT ENGINEERS AND CONTRACTOR. (BID ID -3333030)