08 - Kasba Baraut ward no. 19 v 20 me Rinki Garg/ Jhankar mobile wale ki dukan se Vaibhav Jain Hospital tal (Gandhi Road) CC sadak nirman karya.

Dismentling of old cc road layers including stacking all material as per dirction of engineer lead up to 60.0m in comp.positiopn(s.i-694)

Disposal of material from site up to 3.0 km distance

Contruction of granular sub- base by providing well graded material spreading in uniform layers with motor grader on prepared surface ,mixing by mix in place method with rotavtor at OMC,and compacting with smooth wheel roller to achieve the desired drnsity ,as per MORD,specification 401

M-150B/work in (1:4)mortor with cement and f /sand in drain in comp.position (s.i-305)

12mm thick plaster in (1:4)mortor on brick work in drain in comp.position (s.i584)

Cc in (1:2:4)mortor with cement ,c/sand and stone grit on brick work top in comp.position (s.i-279a)

Contruction of un-reinforced,dowel jointed at expansion and contruction joint only ,plain cement concrete pavement ,thickness as per design ,over a prepared sub-base with 43 grade cement @400kg per cum ,coarse and fine aggregates confirming to IS 383 maxium size of coarse aggregates not exceeding 25mm,mixed in abatching and mixing plant as per approved mix design transported to site laid with a fixed form or slip from paver , spread ,compacted and finished in a continous opration including provision of contruction ,expension contruction and longitudinaten joints ,joint filler ,separatio membrane ,sealant primer ,joint sealent ,debonding strip,dowel bar ,tie rod ,admixtures as approved ,curing compound ,finishing to line and grade as per drawing including 14 days curing in comp .position

supply and laying of 80mm thick cc rubber mouid tile I-shape mechanically compressed interloking paver block manufactured by high pressure and control vibration machine having plan dimension 200*(160+120mm)with minium 5mm topping of O.P cement mixed with 25% marble powder .The compressive strength of concrete paver block shall not be less than 30Mpa and 4.5 kg per no.including cost of all material labour T&P etc Also including leveling and dressing of surface up to required level and slop filling joints with local sand in comp.position (s.i-new item-14)

for colour tile

S/fixing sign board at site in comp.position

STEEL WORK WELDED IN BUILT UP SECTIONS / FRAMED WORK INCLUDING CUTTING HOISTING FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMER USING STRUCTURAL STEEL ETC AS REQUIRED . IN GRADING FRAMES GUARD BAR LADDER RALLING BRACKETS GATES AND SIMILAR WORKS INcluding leaser cutting in complete/ possition in DSR 10.25 .2

Please Enable Macros to View BoQ information