PROVN OF TRAINING SHED AND SPL REPAIR TO SEWAGE LINE AT 4GUARD,SPL REPAIR TO BATHROOMS IN BLDG NO P-157,P-158,PROVN OF VEH SHED,WALL FENCING AT BLDG NO P-17,P-109,TILE TERRACING AT P-32 BHIM ROAD,INTERLOCKING TILES IN THE AOR OF AGE BR-II UNDER GE(W

Amount

Schedule 'A' Part-I (B/R Works)

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting outgetting out in soft/loose soil complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil and removing surplus spoil to a distance n exc 50 metre and making good the disturbed surface complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for shafts,wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exc 15cm thick below or above ground level complete all as specified and as directed.

Material and labour for cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channels and drains and other similar work etc, complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in post hole, foundation, filiing and mass concrete, complete all as specified and as directed.

Material and labour for hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

Demolition of reinforced cement concrete in slab (reinforcement cut as required to facilitate demolition) and removing the rubbish outside denence land complete all as specified and as directed.

Material and labour for plain cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work etc. complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate as in coping, weathering, slightly rounded or chamfered and throating, roof padding to bring the slope of roof 1:40 and the like complete all as specified and as directed.

Material and labour for re-inforced cement concrete 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregate in chajjas, balconies, canopies and the like complete all as specified and as directed. (Reinforcement shall be measured and paid for separetely)

Material and labour for precast reinforced cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate in manhole/drain cover, landing and similar articles, including necessary form work, cover fixed in position and set in cement mortar 1:4 complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exc. 6.0m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and as directed.

Dismantling floor, hearth or wall tiling/ china moisac including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. and bruchsing neat cement slurry with 3 Kg of cement per sqm complete all as specified.

Material and labour for 25mm thick cement concrete 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate as in floor to receive the tiles, surface finished even and rough complete all as specified and directed.

Material and labour for 100mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in floor finished the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour for 80 mm thick, machine pressed precast conctete (white) interlocking paver block, any shape and size, conforming to IS 15658-2006, with grey cement and pigment, M-40 grade complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 50mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection and path finishing, joints filled with bitumen and sand mixer, 50mm thick finished the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour for non-skid joint free ceramic coloured tiles, 7-8mm thick (Square/ rectangular), area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm; as in floors etc, set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles, size 350mm x 250mm x 6-7mm/ 300mm x 450mm x 6-7mmthick as on vertical surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointing in white cement with pigment to match the surface over and including 10 mm thick rendering or backing layer of cement mortar (1:4) complete all as specified and as directed.

Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) and to edges of concrete surface fair finished complete all as specified and as directed.

Material and labour for form work to chajjas etc (horizontal or sloping) and to edges of concrete surface fair finished complete all as specified and as directed.

Supply and fixing rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.

Supply and fixing steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc without any attachement including drilling, fitting, riveting and or welding or connecting with and including bolts and nuts, providing and fitting cleats,welding, turning up and fixing conforming to Fe 410-W (Gde- E- 250) quality complete all as specified and as directed.

Supply and fixing steel work in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates cleats etc without any attachement including drilling, fitting, riveting and or welding or connecting with and including bolts and nuts, welding, turning up and fixing conforming to Fe 410-W (Gde- E- 250) quality complete all as specified and as directed.

Material and labour for mild steel framed work as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including a shop coat of zinc chromate primer and cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 complete all as specified and as directed.

Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Supply and fixing mild steel bolt purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut with not exc. 12mm diameter of neck and not exceeding 15cm long complete all as specified and as directed.

Material and labour for mild steel high yield strength TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply only chain link fencing MS galvanisd fencing, any size or type complete all as specified and as directed.

Material & labour for 1.25mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Supply & fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T section 20mmx3mm with 3 Nos hole complete welded to frame with one verticle mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick, including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1, four Nos for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg. Note: Wire mesh and painted shall be measured and paid separately under respective item of schedule.

Ditto all as per description ser item No- 43.00 but window with glazing shutters but two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete all specified and directed by Engr-in-Charge. Note : Glass pans and painting shall be measured & paid separately under respective item of schedule.

Fixing only mild steel chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire10 guage thick galvanised steel wire mesh fixed to steel fencing post by nut & bolts etc including provision of binding wire complete all as specified and as directed.

Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or fixed with ‘L’ & ‘J' hooks or cranked bolts complete all as specified.

Supply & fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or fixed with ‘L’ & ‘J' hooks or cranked bolts complete all as specified.

Taking down Chowkat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC solid door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification mentioned in preambles of section-8 and drawing shown on SSR Part-II (2010) and complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour 10mm thick PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Supply and fixing sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing 200mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing aluminium cast type anodised handle 125mm long complete all as specified and directed.

Supply and fixing 100 mm size extruded aluminium anodised butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Dismantling, brick tiles single layer as in roof covering etc complete all as specified and as directed.

Demolition of mud in roof any thickness including plaster and leaping (whether full thickness removed or only a part thereof), complete all as specified and directed.

Material and labour for applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 @ 1.25 Kg per sqm over bitumen primer @0.30Kg/ Sqm including preparation of surface complete all as specified.

Material and labour for 40 mm thick brick tiles laid on15mm thick cement mortar bed 1:6 and joints grouted and pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed.

Material and labour for 40 mm thick brick tiles laid on mud mortar and joints grouted and pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska but except brick tiles. (Old serviceable brick tiles shall be re-used). Quoted rate shall be deemed to be included the cost of cleaning and washing of serviceable bricks tiles) complete all as specified and as directed.

Material and labour for flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Supply, laying, jointing and testing 15mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

Supply, laying, jointing and testing 20mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

Supply and fixing 32mm dia G I pipe, 450mm long beveled cut at both ends by making hole in walls sunken portion approx above the R C C slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and as directed.

Taking up or down asbestos cement pressure pipes and connections and or removal to store complete all as specified and as directed.

Supply and fixing in repair 110mm bore PVC (SWR) pipes of pressure rating 6kgf/cm2 single socketed with rubber ring joints, jointing with adhesive laid in trenches/ fixed in walls complete all as specified and as directed.

Demolition and breaking up of drain pipes (salt glazed stone ware or AC or reinforced cement concrete) set in cement mortar of 75/100mm dia complete all as specified and as directed.

Demolition and breaking up of drain pipes (salt glazed stone ware or AC or reinforced cement concrete) set in cement mortar of 150mm dia complete all as specified and as directed.

Demolition and breaking up of drain pipes (salt glazed stone ware or AC or reinforced cement concrete) set in cement mortar of 200mm dia complete all as specified and as directed.

Material and Labour for providing concrete bed in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of the pipes completely after they are laid and tested complete all as specified and as directed. (Note: Width of concrete bed shall be outer diameter of drain pipe plus 30cm)

Material and Labour for providing concrete bed in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipes of 200mm bore including packing under and haunching against the sides of the pipes completely after they are laid and tested complete all as specified and as directed. (Note: Width of concrete bed shall be outer diameter of drain pipe plus 30cm)

Material and Labour for salt-glazed stone ware drain pipes laid in trenches and jointed in cement mortar as specified Internal diameter of pipe in 150mm complete all as specified and directed.

Material and Labour for salt-glazed stone ware drain pipes laid in trenches and jointed in cement mortar as specified Internal diameter of pipe in 200mm complete all as specified and directed.

Material and Labour for 250mm bore RCC pipe (ISI marked) class NP-2 laid and jointed in cement mortar with collars, laid in trenches at any depth and tested complete all as specified and as directed. (excavation, earth work & concrete shall be paid separately)

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and as directed.

Taking out liquid/solid content from sump well/septic tank and sewage lines either manually or by pumping cleaning thoroughly including disposal of liquid/solid content out side the Cantt Area and covering with layer of earth complete all as specified and as directed by Engineer-in-Charge. (Note:- Bamboos will be used for prodding /desludging purpose stirctly, else pumping machine if necessary and not through any other means)

Supply and fixing 110mm bore PVC (SWR) junction single, (Single T) equal or unequal any radius complete all as specified and as directed.

Supply and fixing 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing 110mm bore PVC (SWR) cowl complete all as specified and as directed.

Supply and fixing in repair 15mm bore stop/angle valve, fancy type cast copper alloy chromium plated with long shank screwed down high pressure (concealed type) with crutch or butterfly handle screwed at right angles on both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing in repair 15mm bore bib tap with long body chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing in repair 15mm dia pillar taps cast fancy type copper alloy with capstan heads cromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly screwed for iron pipes complete all as specified.

Supply and fixing 20mm size ball valve brass with polythylene float and fly nut screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply, hoist and fixing in position, 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including supply and fixing 20mm dia, 450mm long GI washout pipe (medium grade) with plug and 20mm dia, 600mm long overflow GI pipe (medium grade) with all fittings including dismantling the existing tank complete all as specified and as directed.

Supply and fixing in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing vitreous china wash hand basin, white, flat back 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including bracket and cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing 32mm dia PVC waste pipe for wash hand basin complete all as specified and as directed.

Supply and fixing 32mm dia brass chromium plated waste coupling for wash hand basin complete all as specified and as directed.

Material and labour for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm including taking out existing trap complete all as specified and as directed.

Material and labour for PVC (SWR) 'P' trap, including jointing with solvent cement, dia of outlet 110mm including taking out existing trap complete all as specified and as directed.

Supply and fixing soap dish stainless steel chromium plated fixed with brass chromium plated screws complete all as specified and directed.

Supply and fixing brass/ chromium plated peg set of six fancy type fixed with brass chromium plated screws complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe of internal diameter 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

Supply and fixing half stall vitreous china urinal bowl, flat back, coloured complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm brass screws, pointing around urinal back in cement and union for discharge and PTMT waste coupling, PVC heavy duty waste pipe complete all as specified and as directed.

Material and labour for fixing Orissa pattern squatting pan with integral foot rest, vitreous china white of size 580mm x 440mm including making connection to trap, flush pipe, antisyphonic pipe (but excluding flushing pipe and flushing cistern), provision of lime concrete bedding and breaking up existing damaged WC and connecting flush pipe etc and making good the floor surface complete all as specified and directed.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white, and connection to drain (or outgoing pipe) and connection to flushing pipe, anti-syphonage pipe, brass chromium plated jet with flexible pipe, plastic seat cover with connection of suitable length etc complete all as specified and as directed.

Supply and fixing brass chromium plated alloy CP jet spray/health foucet for pedestal pattern water closet pan including PVC connection etc complete all as specified and as directed.

Supply and fixing 10 litres capacity PVC valveless syphonic action type, low level flushing cistern ISI Marked white with inlet, ball valve, float and handle including brackets fixed complete all as specified and as directed.

Supply and fixing 450mm long PVC connection fiber reinforced, for Hot/Cold water 15mm size with PTMT nuts and washer on both ends complete all as specified and as directed.

Supply and fixing plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Taking down cement plaster of any description on brick or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for 10mm thick rendering in cement mortar 1:6 on brick work/ or concrete surfaces finished even and fair without using extra cement complete all specified and as directed.

Material and labour for 5mm thick rendering in cement mortar 1:3 as in ceiling of slab, chajja, slab projection etc on fair faces of concrete surfaces complete all specified and as directed.

Material and labour for applying two coats of SHALIMAR SUPERCRETE / NITOBOND water proofing coating on the entire surface of sunken portion complete all as per manufracturer's instructions and as directed.

Material and labour for 15mm thick cement screed in cement mortar 1:3 admixed with and including integral water proofing compound FOSROC’s complast X 412 IC @ 130ml per bag cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/Shalimar Tar Products, Mumbai No 1 liquid @ 200ml per bag complete all as specified and as directed.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying three coats of white wash etc complete all as specified and directed.

Material and labour for complete removal of existing surfaces of wall and applying two coats of white wash etc complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed.

Material and labour for preparation of old decorated surface of walls including scrapping down smook soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surface) and applying three coast of white wash (lime) complete all as specified and as directed.

Material and labour for preparing new plastered or unplastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Schedule 'A' Part-II (Internal electrification)

Taking down carefully aluminum point wiring light /fan /light socket /power with fitting such as ceiling rose, air condition socket, Pendent, regulator, light fitting, street light etc which are not required for use and removing the material from site and making good the surfaces of walls ceiling etc all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light / call bell / fan point controlled by one, one way switch complete all as specified and as directed.

All as per serial item No. 120.00 here-in-before but for one three pin socket outlet 5 Amps on same board with other switches complete all as specified and as directed.

All as per serial item No. 120.00 here-in-before but for one three pin socket outlet 5 Amps on independent board complete all as specified and as directed.

Material and labour for concealed point wiring with 4 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 2.5 Sq.mm size in green colour, for one six pin socket outlet 15 Amps on independent board for AC complete all as specified and as directed.

Supply and fixing switch piano flush button type, 5 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing switch piano flush button type, 15 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing socket outlet multipurpose universal type, 5 Amps, AC, 5 pin, single pole, one way, 230/250 Volts (ISI Marked) complete all as specified

Supply and fixing switch socket combination, outlet multi purpose universal type, 15 Amps, AC, 6 pin, single pole, one way, 230/250 Volts (ISI Marked) complete all as specified

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm having 3 terminals, PVC polycarbonate, isolated body complete all as specified and as directed.

Taking out unserviceable main switch/DB's a complete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, double door, distribution board single pole and neutral 8way, 240 Volts with 200Amps rated bus bar complete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, double door, distribution board triple pole and neutral 4way, 240Volts with 200Amps rated bus bar with incoming/outgoing connection through proper size of lugs complete all as specified and as directed.

Supply and fixing MCB's, single pole and neutral, 32 to 63 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCB's, single pole, 6 to 32 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCCB TPN 100Amps, 415 Volts complete all as specified and as directed.

Supply and fixing lamp holder, PVC/ Polycarbonate insulated body with back plate suitable for batten fittings including making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing electronic fan regulator, step type, 5 steps, 230/250 Volts and connecting up, complete all as specified and as directed.

Supply and fixing LED batten light fitting (double side) 1X22Watts decorative ultra slim aluminium square profile LED light fixture retrofit with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI 6500K (white light) with LED rod 22Watts with fixtures box type and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing in replacement of LED street light fitting 1X25Watts including lamp made of pressure die cast housed with toughened glass and high power LED with secondary optics, IP66 protection, impact resistance of IK 07 & 10 KV external surge protection device including necessary brackets, nuts, bolts and washer as required for fixing and making electrical connections complete to by using PVC insulated and overall sheathed flexible copper conductor of size 0.75 sqmm 3 core complete all as specified and as directed.

Supply and fixing sub main wiring with two single core PVC insulated unsheathed, FRLS multistranded copper conductor cable of size 6 sqmm and one single core PVC insulated unsheathed, FRLS multistranded copper conductor cable green colour of size 4 Sqmm as earth lead through and including 25mm dia PVC concealed conduit with fittings, cutting, chases etc complete all as specified and as directed.

Supply, laying and fixing XLPE insulatedscreened PVC bedded, steel strip or wire armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 25Sqmm, 4 core laid in trenches/through pipe/ducts or on walls complete all as specified and as directed.

Taking out unserviceable cable of any size and any type a complete all as specified and as directed.

Supply, laying and fixing XLPE insulatedscreened PVC bedded, steel strip or wire armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 16Sqmm, 4 core laid in trenches/through pipe/ducts or on walls complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate, electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5metres below normal ground level, connected and including GI earth lead wire 4mm dia connected to earth plate by means of nuts, bolts, check nuts and washers of galvanised iron or steel, GI earth wire protected by 15mm dia GI pipe 'light grade' upto 2 metre above ground level and connected to machinery earth plate surrounded by packed alternate layers of charcoal and common salt 15cm thick all around top and bottom and watering pipe 20mm bore GI light grade all as shown in electrical plate No 3 of SSR Part-I of 2009, testing on completion including providing PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 and 8mm dia TMT bars 100mm C/C bothway and frame including excavation earthwork and returning filling etc, complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit.

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for laying cable/GI pipe etc. and getting out in hard/dense soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for sand filling in trenches for cable cushioning and compaction 8cm below and 15cm above the cable complete all as specified and as directed.

Material and labour for sub class 'B' bricks laid in trenches for cable protection complete all as specified and as directed.

Supply, laying, jointing and testing 40mm bore galvanized iron steel tubing light grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors/road, including cutting through wall complete all as specified and as directed.

M/S Kuldip Construction Co.

M/S RAJESH CONSTRUCTION COMPANY

SARASWATI CONSTRUCTION CO