Providing of Godrej furniture for HSVP office use complete in all respect as per satisfaction of EIC (A/mtc of PH services in Sector 23 to 28, 31 and 32 and sector 1 to 6, MDC, Panchkula)

Amount

Providing and Placing Almirah, shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA `D` grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveler with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns ( plus /- 10). Plenty of colour options and shelving options shall be available. The OEM should be having valid ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 certificates as per NABCB guidlines and BIFMA membership and AIOTA certification. Product should be GREENGUARD, GRIHA, SCS IAQ, certified. The certificates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name.

Providing and Placing Table size shall be 1200 Width x 600 Depth x 740 Height. The top shall be made from 25 mm thick pre- laminated board. All the edges are sealed with 2 mm thick PVC edge band all around. Side panels shall be made from 25 mm thick pre- laminated particle board. All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side. The side panels have 2 glide screws each for leveling of the desk. Modesty panel shall be made from 18mm Item thick pre-laminated particle board. All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre-laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement. The drawers are provided with suitable slides for smooth operation. All the pedestal drawers are centrally locked with a single key Drawer slides are of Hettich, KBPT, CPU Trolley. The OEM should be having valid ISO 9001:2015, ISO 14001: 2015, ISO 45001:2018 certificates as per NABCB guidelines and BIFMA membership and AIOTA certification.

Providing and Placing Table size shall be 1350 Width mm x 750 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edge banding. Understructure Modesty Panel 18 mm thick Pre laminated particle board. The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA, Finish: powder Coat( epoxy polyester). Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube, finish powder coat ( epoxy polyester). The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 5 and MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyester) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveler. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyester) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyester). The OEM should be having valid ISO 9001:2015, ISO 14001: 2015, ISO 45001:2018 certificates as per NABCB guidelines and BIFMA membership and AIOTA certification. Product should be GREENGUARD, GRIHA,SCS IAQ, certified. The certificates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certificate must be verifiable from the authorized issuer`s website.

Providing and Placing Visitor Chair, The seat assembly shall be made up of 1.2 ±0.1cm, thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back assembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 64.5 cm (H). The HR polyurethane foam shall be moulded with density =45 plus /-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The powder coated (DFT 40-60 microns) tubular frame shall be cantilever type and made of dia 2.54±0.03cm x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. Overall Dimensions of Chair shall be Seat Height 46.5cm, Height - 97.5cm, Width and Depth of Chair as measured from pedestal-Width-61.0 cm and Depth-64.5 cm. The OEM should be having valid ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 certificates as per NABCB guidelines and BIFMA

Happy