QUANTUM OF WORK FOR CONSTRUCTION OF NEW 11 KV LINE AND S/S LT FOR RELEASING CONNECTION UNDER FULL DEPOSITE SCHEAME IN THE AREA OF EDSD-I, AJGAIN UNDER DIVISON-HASANGANJ , UNNAO.

Safe Carriage of following Materials from ESC Store Centre Unnao to work dump site/dump site to ESC Store along with loading unloading & proper stocking as per requirement.

PCC/STP Pole of size 8.5/11 mtr.

HT XLPE Cable 3x70 sq mm / 3X120 sq mm 11 KV

ACSR Weasel/ Rabit Conductor

Arial bunch Conductor 1X16 / 3X50 / 3X95/ 3x120 sq mm

Distribution Transformer 25 KVA/ 63KVA/ 100 KVA 11/0.4 KV

11 KV Pilfer proof metering cubical and CT/PT unit

11 KV Cable Jointing Kit outdoor/Indoor of size 3x70/3x120 sq mm

11 KV Cable Jointing Kit Straight Through of size 3x70/3x120 sq mm

Other loose line materials including GI/stay wire, double Pole accessories, complete stay & earthing, insulator, MS channel angle etc.

Erection of PCC/ STP Double Pole Structure including digging of pit and fitting of all accessories complete.

Erection of PCC/ STP Pole including digging of pits, fitting of all accessories with its cartage dump site as per RESPO norms.

Making of H.T./L.T. Section points for line tapping, by brackets, clamps & Making of T-off arrangement for including fabrication and fitting of all accessories.

Grouting OF PCC/STP Pole as per RESSPO norms with grouting materials.

Plinthing RCC half round muffs for STP Pole

Earthing of PCC/ STP Pole as per RESSPO norms.

Digging of pits, fixing, nuzzling and grouting of stay rods as per RESSPO norms with grouting materials.

Fabrication/ Modifications of MS Items, for making Sub Station/HT/LT Line for 25/63/100 KVA Distribution Transformer, Nuts & Bolts as per requirement of site conditions.

Dismantling for line shifting of single pole/ Double Pole, Conductor, AB Cable per span and X-arms, brackets, Insulators, Channels and all hardware fittings.

Dismantling for Shifting Distribution Transformer on pole / plinth, Earthing and all related fittings.

Placement of 11/0.433 KV Distribution Transformer newly constructed T/F on Double Pole Installation and commissioning of 25/63/100 KVA Transformer including lugs, Jumpering & connecting Earthing of body & neutral as per required.

Laying of underground HDPE pipe 140 mm by drill/trench Method

Laying of 11 KV cable size 3x70 sq mm/120 sq mm, dragging of trench 1050 mm, deep 520 vide, including all materials etc. /overhead on pole as required on site.

Fixing of outdoor/Indoor cable jointing kit of size 3x70/3x120 sq mm

Fixing of Straight Through cable jointing kit of size 3x70/3x120 sq mm

Laying Stringing & sagging of HT line by ACSR Weasel Conductor including all related work as joints /jumpers and binding on Insulators as required.

Laying, stringing Aerial Bunched Cable 1x16 / 3x50/ 3x95/3x120 sq mm including all related work as joints /jumpers and binding on Insulators as required.

Installation testing and commissioning New 11 KV Pilfer proof metering cubical in Metering Room and CT/PT unit on pole and Cable terimanison, connecting earthing etc.

Installation and commissioning of H.T. D.O. Fuse Set with Dropper Channel on new double pole as per RESPO norms.

Cable Hosting at Pole with GI Pipe & Clamps as per norms (GI pipe provided by Contractor.)

Laying, stringing, tensioning & final sagging Guarding of Earth wire/G.I. wire including of cross lacing (minimum 10 no. in each span)

Chopping of tree branches lying in the route of making new 11 KV / LT line.

Following Materials to be supplied by contractor

Holding clamps for PCC/STP with Nuts & Bolts.

Stay clamps for PCC/STP with Nuts & Bolts.

LT clamps for PCC/STP with Nuts & Bolts.

F-clamps for PCC/STP with Nuts & Bolts.

LT Shackle Insulator

HDPE Pipe 140 mm

Received back dismantling material from work dump site/dump site to ESC Store along with loading unloading & proper stocking as per requirement.

Distribution Transformer 25 KVA 11/0.4 KV

Iron Scrap

Old & used/ damaged Cable/ Conductor

Please Enable Macros to View BoQ information