REPAIR/MAINT TO FLOORING TILING, PLASTERING, SANITARY AND PLUMBING WKS ETC IN ARMY AREA AT UDAIPUR MIL STN

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding/rendering complete all as specified and directed.

Material & Labour for Non-skid jointless Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rough finished plaster in cement mortar (1:4) all as spd and directed.

Material & Labour for Vitrified digital double charge tiles 10 mm thick ( square or rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc. set and jointed with Balendura adhesive or equivalent as approved by AGE and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.

Material & Labour for Vitrified digital double charge tiles 10 mm thick of size 600 x 100 mm on polished on vertical faces of walls set and jointed with Balendura adhesive or equivalent as approved by AGE and pointed in white or coloured cement to match over and including 10mm thick rough finished plaster in cement mortar (1:4) all as spd and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site ofm work as directed by the Engr-in-Charge.

Material & Labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base/mass concrete and finished the top surface even and fair complete all as specified.

Material & Labour for Vitrified out door tiles 40 cm x 40 cm x 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 . (Make-H & R Johnson, Brand-Endura digital designer series or equivalent)

Material & Labour for machine Pressed precast concrete interlocking paver block rubberised moulded any shape & size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & pigment over and including average 40 mm thick sand cushioning complete all as specified.

Material & Labour for glazed vitrified digital polished (HD) tiles size 1200 mm x 60 mm & minimum 10 mm thick in floors etc. set and jointed with Balendura adhesive or equivalent as approved by AGE and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.

Material & Labour coloured Glazed ceramic tiles on walls size 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles.

Material & Labour for 15-18 mm thick green marble slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type

Material & Labour for 18 mm thick Granite (of any type) slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type

Material & Labour for HDF laminate wooden flooring minimum size 1200 mm x 193 mm & 8 mm thick in wood grain texture flame resistance etc. in floors & skirting etc. as approved by AGE all as spd and directed. (Make- Action TESA essanga AC-3 or equivalent)

Material & Labour for acid proof tiles size 300 mm x 300 mm x 7-10 mm thick blue coloured in flooring of swimming pool etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 all as spd and directed.

Material & Labour for ceramic tiles size 150 mm x 150 mm x 7-10 mm thick blue coloured in wall of swimming pool in patches etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rough finished plaster in cement mortar (1:4) all as spd and directed.

Material & Labour for high durability stainless steel glass railing stain/polished grade 304 height between 900 mm to 1100 mm size of railing 50 mm dia, 40mm x 40mm balauster and 20 mm x 20 mm supprting pipe etc including glass clamps etc.

Supply & Fixing 12 mm thick frosted toughened glass in rectangular shape area exc. 0.8 sqm to 1.5 sqm including etching area 30 cm x 30 cm as per design given by Engr-in- charge as per direction of Engr-in-charge in railing etc. all as spd and directed.

Supply & Fixing in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge. Make: Jaquar Essco ( CAT No-TQT-511) or Equivalent

Supply & Fixing in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. Make: Jaquar Essco ( CAT No-TQT-516A) or Equivalent

Supply & Fixing in repair Brass CP bath Mixer 3 in 1 system with 115 mm long bend pipe connection to overhead shower suitable 15mm bore of pipe and fixed. Make: Jaquar Essco ( CAT No-TQT-517B) or Equivalent

Supply & Fixing in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. Make: Jaquar Essco ( CAT No-TQT-526) or Equivalent

Supply & Fixing in repair 15mm bore 2 way angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. Make: Jaquar Essco ( CAT No-TQT-526AF) or Equivalent

Supply & Fixing in repair chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. Make: Jaquar Essco ( CAT No-EOS-538N) or Equivalent

Supply & Fixing in repair waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed by Engr-in-charge.

Supply & Fixing CP jet spray with flexible tube etc complete all as specified & directed. Make: Make: Jaquar Essco ( CAT No-ALE-547) or Equivalent

Supply & Fixing health faucet (hand shower) (ABS body) with 1.2 mtr long flexible tube and wall hook etc complete all as specified & directed. Make: Jaquar Essco ( CAT No-ALE-ESS-583) or Equivalent

Supply & Fixing in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge. (Make:Parryware/Jaquar/plumber/Prayag)

Supply & Fixing in repair brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified. (Make:Parryware/Jaquar/plumber/Prayag)

Supply & Fixing in repair toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc. (Make: Parryware/Jaquar/plumber/Prayag)

Supply & Fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge. (Make:Parryware/Prayag/plumber)

Supply & Fixing Corner glass shelf size 200 mm radius with bracket and glass complete set etc. (Make- Prayag Droplets collection CAT No-BEA-42) or equivalent

Supply & Fixing Glass shelf size 500 X 125 mm radius with bracket and glass complete set etc. (Make- Prayag Droplets collection CAT No-BEA-45) or equivalent

Supply & Fixing CP Towel Rack size 18'' (450 mm) fixed to walls with chromium plated (CP) brass screws etc complete all as specified & directed. Make: Make: Jaquar Essco ( CAT No-AEC-1181A) or Equivalent

Supply & Fixing PVC waste pipe size 32 mm flexible with coupling for WHB/Sink/Urinal etc. complete all as specified and directed.

Supply & Fixing in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

Supply & Fixing for Coat hook/Robe hook of brass chromium plated body fixed to wooden plugs with screws and cup washers fixed in repairs. (Make- Prayag Cantabile - Niagara series CAT No-BA -87) or equivalent

Supply & Fixing vitreous china wash basin white counter below excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified and directed.

Taking down old vitreous china EWC and cistern and Supply & Fixing vitreous china EWC one piece S concealed with Soft Close Seat Cover and Twin Flush Fittings Ivory colour fixed all as specified and directed. (Make -Cera, Brand-Cruse, CAT No-Cat No: S1012135)

Dismantling AC/PVC rain water pipes alongwith fittings of 75mm dia, jointed in cement mortar complete all as specified.

Material & Labour for PVC (SWR) pipes single socketed, in any length with BEND and rubber ring joints, laid in trenches or in floors of 75/50 mm bore of pipe including fittings etc complete all as specified and directed.

PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement

Demolition of brick work or stone/boulder masonry built in cement mortar or concete work including all quoins, arches, pillars etc complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material & Labour for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed

Material and labour for preparation of newly plastered/old complete removal surfaces of wall and applying two coats of cement base paint complete all as specified.

Taking down existing aluminium door shutter with frame area exceeding 1 Sqm and re-fixing in same opening after repair/replace the defective parts (any type of aluminium section) complete.Note : Aluminium parts will be measured and paid separately.

Supply & Fixing in repair mortice Lock with all fittings for aluminium door. (Make: Godrej/Link/Harrison)

Supply & Fixing aluminium handle size & shape as per existing handle for aluminium door or 200 mm long etc. all as directed.

Supply & Fixing 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed

Supply & Fixing 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

Supply & Fixing alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.

Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).

Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).

Supply & Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete.

Supply & Fixing Aluminium anodised or powder coated door, window, ventilator frame with one or more rebates and shutter sliding or casement windows as reqd. including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified.

Supply & Fixing 5.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply & Fixing for 12 mm thick prelaminated particle board interior grade both side decorative choice laminations fixed in aluminium frame work.

Supply & Fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. (Make -Sandhu/Hardwyn/Droma/Doorking).

Supply & Fixing in repair door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (Die cast) body complete all as specified and directed. (Make -Sandhu/Hardwyn/Doorking/Kelwyn)

Material & Labour for POP decorative cornice moulding exc 10 cm but n exc 20 cm in width or girth fixing between junction of wall and ceiling at certain locations including two coats distempering all as spd and directed etc.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 and with all reqd fittings on walls/ceiling or laying in floors complete all as spd and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 and with all reqd fittings on walls/ceiling or laying in floors complete all as spd and directed.

Material & Labour for complete removal of existing treatment of walls, roof projection, fins and fascia etc. with wire brush or any manul other mechanical method by manual and reaching upto old plastered surface complete all as specified and directed.

Material & Labour for applying 1 mm thick Birla/JK wall care white putty in two layers white wall care putty on complete removal of existing treatment externl or internal walls complete all as specified and directed.

Material & Labour two coat of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas on prepared putty surfaces of bldg upto double storeys bldgs complete all as specified & directed. Note : Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

Material & Labour for texure painting design as approved by Engr-in-charge with two coat of interior emulsion paint tinted on walls over a coat of primer over prepared putty surfaces of walls complete all as specified & directed. Note : Make :-Asian Paints / Berger paint / Nerolac paint

Preparation of old treated surfaces (plastered or unplastered) of wall cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots old treated plastered surfaces of walls, cleaning of windows/ventilators glass panes & applying one coat of cement base paint complete all as specified and directed. Note : Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints

Material and labour for preparation of newly plastered/old complete removal surfaces of wall and applying two coats of cement base paint complete. Note : Make :-Snowcem / Berger paint (Duracem)/ Nerolac paint /Asian Paints

Material & Labour for Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls upto tripple storeys bldg complete all as specified and directed.

Material & Labour for applying two coats of distempering with acrylic distemper white or coloured on prepared wall surfaces (putty) or old decorated/plastered surfaces complete all as specified and directed. Note : Make :-Asian Paints (Brand-Tractor Uno)/ Berger paint (Brand -Bison) / Nerolac paint (Brand-Beauty)

Material & Labour for preparation of old decorated surfaces of plastic emulsion of walls and applying two coat of anti fungal plastic emulsion paint on walls complete all as specified and directed. Note : Make :-Asian Paints (Brand-Apcolite)/ Berger paint (Brand -Easy Clean) / Nerolac paint (Brand-Beauty Gold)

Material & Labour for Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling upto double storeys bldg complete all as specified and directed.

Material & Labour for Preparation of old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Material & Labour for Preparation of old painted steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & Labour Preparing newly plastered surfaces of walls any apply three coat of white wash complete.

Supply & Fixing 12 mm thick toughened glass in windows with all fiiting assesories in partion etc. all as spd and directed.

Supply and replace on line booster pump single phase with automatic pressure regulation upto 4.0 kg / cm 2 MAKE : GRANDFOS /CRI/Cropmton Greaves

Taking down carefully aluminium point wiring complete concealed, connected to walls/including fittings/fixtures complete removing and making good the disturbed surface of walls/ceiling as per existing etc for the point wiring

Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade drawn through in concealed and PVC casing caping with all accessories as required and directed by Engr-in-charge, fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties and cadmium plated screws as per IS on existing/new if required at site sunk type CI/GI Steel/Wooden terminal with suitable for regular/ Modular boxes with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly for & with specified Make:Anchor/Havells/Polycab

(a) One light point controlled by one 5 Amps SP switch

(b) One fan point controlled by one 5 Amps SP switch

(c) One 5 pin 5 Amps socket outlet on same board

(d) One 5 Pin 5 Amps socket outlet on independent board

(e) One bell /buzzer point controlled by one push button

(f) One light point controlled by two 2-way switch

(g) One power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch

All as per items No 2 above for one point for (AC point ) with PVC insulated unsheathed FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm (Nominal area ) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area ) cable common connected to earth dolly controlled by one switch complete all as specified and as directed by Engr-in-Charge, with specified Make: Anchor/Havells/Polycab

Supply & Fixing switch piano type, flush button single pole, one way 5 amps complete all as specified and directed,with specified Make: Anchor/Havells/GM

Supply & Fixing Modular switch piano type, flush button single pole, one way 6 amps complete all as specified and directed, with specified Make: Anchor/Havells/GM

Supply & Fixing switch piano type, flush button single pole, two way 5 amps complete all as specified and directed,with specified Make: Anchor/Havells/GM

Supply & Fixing bell push button single pole, one way 5 amps complete all as specified and directed, with specified Make: Anchor/Havells/GM

Supply & Fixing switch piano flush button, 15 Amps, single pole one way complete all as specified and directed, with specified Make: Anchor/Havells/GM

Supply & Fixing Modular switch piano type, flush button single pole, one way Module 16 amps complete all as specified and directed, with specified Make: Anchor/Havells/GM

Material & Labour socket outlet 5 amps, 5 Pin, flush type complete all as specified and directed, with specified Make: Anchor/Havells/GM

Material & Labour Socket, 6A - 2/3 pin combined 2 module, type complete all as specified and directed, with specified Make: Anchor/Havells/GM

Material & Labour socket outlet 2 in 1, 3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed, with specified Make: Anchor/Havells/GM

Material & Labour Socket 6A/16A - 2/3 pin combined 2 module type complete all as specified and directed. Make: Anchor/Havells/GM

Supply & Fixingixing inreplacement of for ceiling rose, surface type bakelite 65 x 50 mm three terminal complete all as specified and directed, with specified Make: Anchor/Havells/GM

Supply & Fixing inreplacement of lamp holder , insulated body cord grip pattern suitable fixing on wall/ pendant fittings, with specified Make: Anchor/Havells/GM

Supply & Fixing bell ding dong type AC, 230 Volts ,Single pole,with specified Make: Anchor/Havells/GM

Supply & Fixing inreplacement of ceiling fan regulator step up type 230 volts suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed, with specified Make: Anchor/Havells/GM

Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts 32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling.

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type with specified Make: ABB/L&T/Legrand

(a) 12 ways

(b) 08 ways

(c) 04 ways

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 415 volts TPN 4way including 200 amps rated bus bar all as specified and directed by Engr-in-charge,with specified Make: ABB/L&T/Legrand

Supply & Fixing of MCB SPN in the DBs catered above of the following ratings and with specified Make: Anchor/Havells/Polycab

(a) MCB TPN 63Amp

(b) MCB SPN 40 to 63 Amp

(c) MCB SP 6 to 32 Amp

Disconnecting of unserviceable sub main wiring/Service connection of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

Material & Labour for Submain wiring with two run of single core 4 Sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of earth continuity conductor with 4.0 sqmm multi stranded copper conductor cable all as specified and directed . Note :- Two run of single core cable and one run of earth continuity conductor and one metre of conduit shall be measured as one unit, with specified Make: Anchor/Havells/Polycab

Taking down U/S earth plug and Supply & fix new metal clad 20 Amp 230 volts single pole and neutral and earth enclosure with two pin and earth plug with socket complete with one single pole MCB of 20 Amp 10 KA all as directed by Engineer-in-charge. Make: ABB/L & T/Legrand

Material & Labour for Earthing complete as per electrical plate No 5 of MES SSR Part I with galvanised Steel plate earth electrode 600mm x 600mm x 6mm buried directly in ground in a earth pit of depth not less than 2.25 meter below ground level , the top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to galvanised iron or steel earth lead wire 4 mm dia as earth lead by means of bolts, nuts and washers of GI & steel earth lead protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe with funnel on upper side shall be 20 mm dia GI medium grade including excavation and earth work in any type of soil, PCC pit, CI frame , CI cover 10mm thick with hinged to CI frame complete. Note :-(i) Irrespective of what is shown in electrical plate , the concrete pit shall be in PCC 1:3:6 type C-1 and 40 mm thick pre-cast Cover slab of RCC 1:2:4 type B1 using 20 mm Graded stone aggregate with suitable handle. (ii) Items includes the cost of GI pipe for protection of earth strip including earth lead up to7.5 meter. Each 01

Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front side openable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 600x500x200mm all as speceified & directed by Engr-in- charge. Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item.

Taking down old U/S exhaust fan and supply and fixing PVC exhaust fan of size 200mm sweep with louver 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed, with specified Make Usha/Orient/Bajaj

Taking down old U/S exhaust fan and supply and fixing PVC exhaust fan of size 150mm sweep with louver 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed, with specified Make Usha/Orient/Bajaj

Supply & Fixing inreplacement of batten holder with LED panel light aluminium dicasting with acrylic diffuser fitting surface mounted type with integrated electronic driver cap 12 watt with specified Make - Crompton/Havells/ Philips

Fixing only inreplacement LED tube light 16/18/20/22 watt, 4 feet long all as per directed by Engr-in-Charge NOTE :- LED Tube light/ Rod of 4 feet long issued under sch"B" Free for fixing.

Supply and Fixing inreplacement LED tube light 10/12 watt, 2 feet long all as per directed by Engr-in-Charge, with specified Make: Anchor/Havells/Phillips

SHISHODIA ENTERPRISES