Construction of Canal Rest House at Canal Colony, Jalandhar

Amount

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. depth upto 3 mtr.

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 10 kms pucca

Cement concrete 1:8:16 with 40mm gauge stone aggregate using concrete mixing volumetric type

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

Damp proof course 4 cm thick of cement concrete 1 : 2 : 4 with 2 coats of bitumen 20/30 penetration at 1.65 kg per Sqm. laid hot and sanded.

First class burnt brick work laid in cement sand mortar 1:6 in first story up to 4 mtr avobe plinth level . A) Ground Floor

First Floor

Second Floor

Third Floor

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure (First story)

Centering and Shuttering a) Foundation

Centring and shuttering for columns (Square or rectangular or poly gonal in plain) a) Ground Floor

First Floor

Second Floor

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels. a) Ground Floor

First Floor

Second Floor

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. a) Ground Floor

First Floor

Second Floor

Centring and shuttering for Stair Case etc. a) Ground Floor

First Floor

Centring and shuttering for faces of walls, partitions,retaining walls and the like (vertical or bartering including attached pillasters buttersses etc

Reinforced cement cocrete M-20 Mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in Foundation and Plinth level

Reinforced cement cocrete M-20 Mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. A) Ground Floor

First Floor

Second Floor

Cold twisted deformed (ribbed/ tor steel) Bars Fe 500 grade as per IS 1786-2009 for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.

Cement Plaster a) 12.5 mm 1:5

20 mm 1:5 two Coat

Bearing Plaster of 10mm th CM 1:3 cement sand finished with a floating coat of neat cement & thick coat of lime wash/pop of top of walls when dry for bearing of RCC slab and beams

Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.83 cm laid over 25mm mud plaster, 7.5 cm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement sand mortar 1:4 and top surface to be left clear after wire brushing etc.

Cement concrete 1:2:4 gola 10 cm. x 10 cm. quardrant along junction of roof with parapet wall finished smooth, where specially specified.

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.

Bottom Khurra on ground 1.2m x 0.6m Mtr. Consisting of brick on edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3.

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS: 4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item)

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing during masonary UPVC 160 mm bend complete as per specifications and to the entire satisfaction of Engineer-incharge. UPVC 160 mm bend

Base course of floor consisting of 100mm thick cement cocrete 1:8:16 and 100mm sand or stone filling, using mechanical mixer for mixing of material. With stone egregrate 46mm gage .

Screed of 50mm th cement Conc 1:8:16 to be laid below the topping , using mechanical mixer for mixing of material.

Conglomerate floor 50mm thick cement concrete 1:2:4. on 100 mm thick cement concrete 1:8:16 and 100 mm sand filling using mechanical mixer for mixing of material.

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement :4 fine sand), complete. (Design is homogenous throughout the tile body.) a Size 600 x 600 mm

Black Granite stone tiles 20 mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Coloured Granite stone tiles 20 mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Factory manufactured 35mm thick flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-

Supplying and fixing of pressed steel frames (chowkat) consisting of 18 gauge ( 1.25 mm thick steel) sheet of specified section ( standard design latest) including iron lugs (hold fast) for iron hinges,conforming to PWD specifications including bolts for fixing stops,lock ,notch provision for receiving tower bolts,hydraulic spring and finished with one piming coat of approved quality fixed in position,including the cost of cement concrete 1:3:6 for filling the frame and cement concrete 1:2:4 for lugs complete : a) Doors and windows frame of size 118mmx 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.

Doors and windows frame of size 113 mm x 60mm with 35 mm wide double rebate weighing 3.38 kg per meter.

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make Glass panes 4mm thick above 0.40 sqm area.

Teak wood door shutters and windows panneled glazed or panneled including iron hinges, screws etc complete fixed in position (excluding cost of tower bolts and handles but including cost of fixing them) Single leaf. 35 mm thick

Teak wood wire gauze shutter without spring (Single leaf) 35 mm thick

Providing & fixing stair case railing made out of MS Square bars 20 mm x20 mm as vertical part 0.70 m high fixed with MS base plate of 40 mmx 40 mm x 6 mm and flat iron 40 mm x 6 mm as hand rail complete in all respect.

Preperation of plastered surface for distempering including surface, applying filling with approved quality filler consising of plaster of paris and chalk mitti including finishing the surface to required finish complete

Distempering with acrylic washable oil bound distemper (of approved manufacturer) two coats over one priming coat to give an even shade.

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) for shutter area upto 0.50 mtr.

Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or moulded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.

P & F SS gates with sheet

Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and tothe entire satisfaction of engineer-in- charge.

Deodar wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles bolts hasp with staple 25 mm thick but including the labour for fixing them

HORTICULTURE WORK ______________________ Supplying specimen pot plant in 45 cm plastic pots with plastic plate for indoor display at site of work

Supplying specimen pot plant in 45 cm cement pots for outdoor display at site of work.

Grassing of grounds with doob grass including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm . Removing all weeds and other growth with roots by forking repeatedly,breaking clods,mixing fertilizer,rough dressing and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts,planting grass roots in rows 10 cm apart in both directions,watering, weeding and Maintenance till turf is formed.

Planting bulbous flower beds including digging of beds to 15 cm depth mixing FYM, fertilizer and insecticides, planting of sapling at 30 cm distance from plant to plant and row to row .

planting rose beds including digging of beds to 15 cm depth and mixing FYM,fertilizer and insecticides ,triangular planting of sapling at 60 cm distance from plant to plant and row to row.

Electrical items RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- a) Wiring fan point (Without fan box) finishing the surface

Wiring fan point (With fan box)

RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): a) Wiring light point

Wiring call-bell point

Wiring 6Amp. wall socket point

Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (a) Wiring TV socket point (one module) ------------- Wiring Telephone socket point RJ11 (one module)

Wiring Networking socket point RJ45 (one module)

PVC INSULATED FR COPPER CONDUCTED CABLES supply and erection of PVC insulated FR Single core Ussheathed copper conductor cable (ISI marked ) suitable up to 1100 Volts grade confirm to IS:694/1990 left bare in pipe of casing of suitabe size complete in all respect as desired by the Engineer -in- charge. a)Overall size 1sq.mm (Un-sheathed)

Overall size 1.5sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed

Overall size 4sq.mm (Un-sheathed)

Overall size 6sq.mm (Un-sheathed)

Overall size 10sq.mm (Un-sheathed)

Overall size 16sq.mm (Un-sheathed)

PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: (xii) Supply and erection of PVC a) Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- a) Overall size 1.5sq.mm (48/0.20mm), 2Core

Overall size 2.5sq.mm (50/0.25mm), 2Core

XLPE INSULATED UN-ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- a) Overall size 10sq.mm (2Core) Un-armoured (Loose)

Overall size 35sq.mm (3½ Core) Unarmoured (Loose)

Overall size 50sq.mm (3½ Core) Unarmoured (Loose)

Overall size 75sq.mm (3½ Core) Unarmoured (Loose)

Overall size 16sq.mm (4 Core) Unarmoured (Loose)

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (i) Heavy Gauge PVC Conduit Pipe 20mm dia. (On a) Heavy Gauge PVC Conduit Pipe 25mm dia (Flushed)

Heavy Gauge PVC Conduit Pipe 32mm dia (Flushed)

PVC compression Socket gland 25mm dia.

G.I. EARTHING: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling). A)Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 14Metre in length)

Earthing with 7/14 S.W.G. (7/2.18mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (up to 14 Metre in length)

G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (On Surface) with sockets, elbows and MS saddle clamps including painting etc. a) Additional length G.I. wire 8 S.W.G. (4mm dia.) in 15mm dia. G.I. pipe (On Surface)

Additional length G.I. rope 7/14 S.W.G. (7/2.18mm dia.) in 20mm dia. G.I. pipe (On Surface)

COPPER EARTHING (Upto 14 metre in length) Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of

Additional Length 20mm x 3mm thick Copper Tape

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets,and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including connections and petty material etc. Bakelite batten holder large size

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (i) MCB Single Pole 0.5-4amp. (10kA, Curve- a) MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Double Pole 6-32amp. (10kA, Curve-C)

MCB Double Pole 40amp. (10kA, Curve-C)

MCB Four Pole 40amp. (10kA, Curve-C)

MCB Four Pole 50, 63amp. (10kA, Curve-C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- (i) SP&N Double Door Distribution Board 4 way a) SP&N Double Door Distribution Board 8 way each

TP&N Horizontal Double Door Distribution Board 6 way each

TP&N Horizontal Double Door Distribution Board 8 way each

CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- a) Cable Tray Size 150mm x 50mm x 50mm (2mm thick)

GI PIPE POLES & BRACKETS: GI PIPE POLES ____________________ Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:-G.I. Pipe Pole 6.1 metre Long, Dia. 80mm, Planting Depth 120cm with Pit Depth 135cm.

Single Arm Bracket 1.5 metre Long with G.I. Reducer 80mm x 40mm

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc.of the required size:- a) Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)

Double Walled Corrugated HDPE Pipe 120/ 103.5mm (Outer/ Inner dia.)

Aluminium thimble cable Core size 25 -35sq.mm

Copper thimble cable Core size 10 -16sq.mm

Supply and erection of ENDURA CITYLINER NEX GEN new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power 45 volt LED as lighting source and lens embedded PC cover with IP66 protection and impact resistance of IK07. Make Havells cat no. jaguarENDURACITYLINEARNEXGENSL45WLED757SASYBOPC and equivallent make: PHILIPS & GE Complete in all respect as approved and desired by the engineer incharge at site.

Supply and erection of 40 watt LED decorative post top for 360 degree indirect light with IP65 protection, glare free, energy saving with high power LEDs as light source. Make Compton cat no. LPTO-40CDL (Maple) and equivallent make: Havells, Philips. Complete in all respect as approved and desired by the engineer incharge at site.

Supply and erection of new adore LED lamps 15 watt cat no. 15 watt LHLDEBUEML8Z015 make Havells and equallent make GE, Philips. The LED lamp erection of existing batton holder etc complete in all respect as desired by the engineer incharge of the work at site.

Supplying, installation, testing and commissioning of 16-25 amp 240 volt, SPN AC starter with suitable zinc passivated box with on surface or in recess, including connections, numbered stickers, ferruling etc. a required make: model no. W26217 or similar

S/E of Digital EBABX sytem configured for 4 P & T lines and 24 expenable 40 extentions with inbuilt CLI. Microprocessor based universal slot digital / IP / ISDN with clips expandable port plateform of offered system complete in all respect as approved and desired by the engineer in charge at site. Make: MATRIX / LUCENT / AVAYA

S/E of Digital operator console with display, Mute, redial, music on hold hands free mode, LCD display, 16 programable keys.

S/E of float cum boost charger of DYNA make having current rating 12.5 amp and voltage ratings 48 V with 04 nos. 12V / 26 AH maintenance free batteries to provide 8-10 hrs. Power back up to the system in case of main power failure complete in all respect as approved and desired by the engineer in charge.

S/E of Electronic Push Button telehone with audio visual indication and compatible to digital EPABX system. Make:- Beetal, panasonic complete in all respects as approved & desired by Engineer in charge at site.

S/E of Electronic Push Button telehone with caller ID, display screen and hands free operation compatible to digital EPABX system. Make:- Beetal, panasonic complete in all respects as approved & desired by Engineer in charge at site.

S/E of 20mm double lock PVC channel of make Monty / Anchor / Superfix / MK / LK only complete in all respect as approved and as desired by the engineer in charge.

S/E of PVC telephone cable in existing PVC pipe and perty one pair key space to maintenance purpose. The cable should be of Delton / Finolax / Shalimar make only complete in all respect as approved and desired by the engineer in charge at site. a) 2 pair 0.5mm dual shielded PVC telephone cable.

10 pair 0.5mm PVC telephone cable.

S/E of KRONE type distribution box fitted with crown type modules in MS box fabricated of 18 gauge MS sheet, powder coated and having locking arrangement. A) Distribution box 10 pair

Supply & Erection OF CAT-6 UTP CABLE IN EXISTING PVC CONDUITS INCLUDING OF TRACING, TESTING,NUMBERING AND TERMINATION ON DATA SWITCHES AND I/Os ON OTHER END complete in all respects as approved & desired by the Engineer-in-Charge

Supply and erection of 1*36 watt surface mounted integrated LED batten Crompton make cat no. LDL-36-CDL and equallent make Havells, Philips. including connection and testing as desired by the engineer incharge of the work.

Supply and erection of Venus Neo HE ultra modern designed architectural LED luminaire which provides soft light and glare free symmetrical illumination suitable for Armstrong/grid ceiling. Make Havells cat no. VENUSNEOHE2X2PLR24WLED8XXS and equivallent make: PHILIPS & SCHNEIDER. Complete in all respect as approved and desired by the engineer incharge at site.

LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS):Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55). Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel.LT Panel enclosure having space for 1No. Incomer MCCB 200Amp. and 4Nos. outgoing MCCB's 40amp. to 100amp. according to the requirement at site (Approx. size 1825 x 1000 x 300mm)

Sanitary fittings ___________ Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) Consisting of 10 ltr. PVC flushing cistern, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of engineer in charge.

Providing and fixing jet spray with 2'-6" long PVC pipe. A) With C.P. Brass nut

Vitreous white Chainware Partition a) Small paritions size 680mm x 300mm

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect. a) Size 550 mm x 400 mm

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required by the Engineer-in-charge.

Providing and fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. a) Aluminium Khunti with 6 pegs

Providing and fixing in position premium range C.P Brass fittings and accessories of approved make ( to the approval of Engineer-in-charge) complete in all respect. C.P. Brass Accessories , C.P. brass soap dish, Holder with Gilass dish

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S studs on top complete in all respect (as required by the Engineer-in-charge) a) Size 600mmx450mm

Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS-13592 of approved make (to the approval of Engineer-in-charge) including cutting, jointing, wastage, but excluding cost of lead jointing. Type A a)160mm o/d SWR UPVC pipe line laid complete

110mm o/d SWR UPVC pipe line laid complete

Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyphonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. a) M.S. Holder bats clamps for 100mm i/d H.C.I. pipes

Providing and fixing in position SWR UPVC specials for soil waste vent or anti siphonage pipes as per IS-14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipes a) eblow 90 degree ( all side socked)

vent cowls

P Trap/ Floor trap 110mm x 75mm

Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications (IS:1729) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 100mm i/d pipes a) H.C.I. Heal Rest Bend

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. a) 100mm internal Diametre S.W. gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval if Engineer-in-charge) of size 600mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect.

Sewer and water supply Excavation manually in trenches with straight or open cutting in a built up street/ lanes having wall to wall width upto 3 metre for sewers and manholes to full depths as shown in drawings, including shoring, dressing to correct sections and dewatering of rain water, provision for diversion for traffic, protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, fixing and maintenance of caution boards, fencing, refilling trenches, watering, dressing and restoration of surface to original level and removal of surplus spoils from the site of works upto 15 metre, for all works other than connections to complete in all respects. For depths not exceeding 2.0 metre B.G.L. For all classes of soil except rocky Unit:-

Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. a) 160 mm o/d pipes

200 mm o/d pipes

Constructing brick masonry manhole in cement mortar 1:5 (1 cement : 5 coarse sand) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. a) Inside size 90x150 cm with depth 120 cm deep

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. a) 600mm x 900mm inside with 455mm x 455mm cover and frame medium duty double seal

Tubewell Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of speicals (such as tees, bends, sockets, elbows etc.), painting with anti corrosive bltumastic paint, testing, cutting, threading inside building complete. a) 50mm i/d

Boring with casing pipe for sumerbil in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested, equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect. a) Boring with 200mm id Housing pipe upto 150m depth BGL .

Boring with 150mm id Housing pipe upto 150m depth BGL

Supplying, lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore. a) Supplying 100 mm Diameter weight 14.5 kg per mtr ) 5.40 mm thickness

150mm nominal diameter (weight 21.6 kg per metre) 5.4 mm thickness.

Supplying, fixing & lowering of Stainless Steel Cage type wire wound screen as per IS:8110-2000 or latest ISI marked, duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore. a) 150mm steel strainer (slot size 0.15/0.20mm) 5.00 mm thickness

Supplying, fixing and lowering of stainless steel socket as per IS 8110-2000 or latest, ISI marked duly welded with suitable grade ss welding electrode to lower the strainer into tubewell bore complete in all respect. a) 150mm Internal diameter

Supplying, lowering & fixing of M.S Special socket to connect S.S Strainer to M.S Pipe duly welded with suitable grade welding electrode complete in all respect. A) 150mm internal diameter

Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Supplying at site Wooden Box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.

Supplying & Fixing of bail plug of M.S pipe complete with inverted U-hook attched to the bottom plug complete in all respect. A) 150mm internal diameter (weight 21.6 kg per metre) 5.4 mm thickness

Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. A) 150mm internal diameter

Development and Stabilizing of the tubwell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. A) Capacity of Air compressor 300 cfm at 250 PSI

Development and Stabilizing of the tubwell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Collection of water sample from different strata and testing of sample from approved laboratory (Phisical & chemical Analysis)

Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)

Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete. For Drain pipe of AC 20mm i/d

Pumping machinery Providing & installing,testing & commisioning of 1 no electrically driven Submersible Pump set of 1.50BHP KSB make capable of delivering 50.00LPM against a head of 40mtr along with electric panel board consisting of electrical appliances such as automatic Star Delta Push Button or oil imeersed starter, Main Switch, VM, AMpere Meter, ELCB, Shunt capacitor. Single phase, preventer, Indicating lamps, Kit-Kat etc., including M.S column Pipe 50mm of IS: 1239-2004 medium class suitable size 40.00mtr (in 3mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 50mtr 2.50mm2 IS694-1990 reaffirmed 2000 complete in all respects and as per standard specifications. (1.5 BHP Motor with Pump)

Providing & installing,testing & commisioning of 1 no electrically driven Submersible Pump set of 1.50BHP KSB make capable of delivering 50.00LPM against a head of 40mtr along with electric panel board consisting of electrical appliances such as automatic Star Delta Push Button or oil imeersed starter, Main Switch, VM, AMpere Meter, ELCB, Shunt capacitor. Single phase, preventer, Indicating lamps, Kit-Kat etc., including M.S column Pipe 50mm of IS: 1239-2004 medium class suitable size 40.00mtr (in 3mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 50mtr 2.50mm2 IS694-1990 reaffirmed 2000 complete in all respects and as per standard specifications.(Panel Board)

Providing & installing,testing & commisioning of 1 no electrically driven Submersible Pump set of 1.50BHP KSB make capable of delivering 50.00LPM against a head of 40mtr along with electric panel board consisting of electrical appliances such as automatic Star Delta Push Button or oil imeersed starter, Main Switch, VM, AMpere Meter, ELCB, Shunt capacitor. Single phase, preventer, Indicating lamps, Kit-Kat etc., including M.S column Pipe 50mm of IS: 1239-2004 medium class suitable size 40.00mtr (in 3mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 50mtr 2.50mm2 IS694-1990 reaffirmed 2000 complete in all respects and as per standard specifications.(Cable (Size/Cost) 4.00mm2)

Providing & installing,testing & commisioning of 1 no electrically driven Submersible Pump set of 1.50BHP KSB make capable of delivering 50.00LPM against a head of 40mtr along with electric panel board consisting of electrical appliances such as automatic Star Delta Push Button or oil imeersed starter, Main Switch, VM, AMpere Meter, ELCB, Shunt capacitor. Single phase, preventer, Indicating lamps, Kit-Kat etc., including M.S column Pipe 50mm of IS: 1239-2004 medium class suitable size 40.00mtr (in 3mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 50mtr 2.50mm2 IS694-1990 reaffirmed 2000 complete in all respects and as per standard specifications.(Column Pipe (G.I) ( Size/Length) 40mm i/d)

ac gyser ro Supply, installation and testing of Refrigerant copper piping (inlet and outlet pipe) with interconnecting cable between indoor / outdoor units as per site, insulation of copper pipes, gas charging, support, (piping shall run in G.I. painted cable tray if on terrace) complete in all respects for 2.0 TR Hi Wall Split AC.

Supplying and fixing of MS Stand 0.40x0.50x0.50 mtrs made of ISA 25x25x4mm duly painted with 2 coats of red oxide and enamel paint for water filters

Providing and fixing Water Geyser 25 Litre Storage complete in all respect. Make Crompton/ Bajaj/ Orient

Any Other Item

TEH BAHIA CO OP L AND C SOCIETY LIMITED