SPECIAL REPAIR TO OFFICERS MESS AND CERTAIN MINOR WORKS AT AIR FORCE STATION NATHATOP UNDER GE (AF) UDHAMPUR

Amount

B/R Portion

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each complete all as specified.

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed.

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling timber scantling 40 Sq. cm and over in section, in any position, unframed work complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and as directed.

Taking down cement plaster of any description on Brick Walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

Demolition of Brick work or stone/boulders masonry, built in cement mortar all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store

Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel/aluminium frames complete all as specified and as directed.

M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm girth but not exc 20cm complete all as specified and as directed.

S & F Anodised Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats, beading for fixing etc complete all as specified and as directed.

S & f anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats ,glazing cleaps,rubber neoprene packing ,handles 02 nos in each door ,hinges,aluminium anodised snap beading screws etc complete all as specified and as directed.

Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed .

Supply and fix 5.50 mm thick plain sheet glass ordinary quality and glazing with aluminium beading in square exc. 0.5 Sqm in each pane fixed with aluminium frame work complete all as specified and as directed.

S & F for 4mm thick Sheet glass,ordinary quality and glazing with aluminium beading in square n exc. 0.5 Sqm in each pane fixed with aluminium frame work complete all as specified and as directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame complete all as specified and as directed.

S & F aluminium anodised barrel tower bolts extruded section of 100 mm, long complete all as specified .

S & F aluminium anodised handles fabricated type extruded section of 150 mm, long complete all as specified .

S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified .

M&L for Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Gl frame work of size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for preparation of new surfaces of Gypsum board ceiling and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed.

M&L for 5 mm thick solid PVC lining / panelling Solid Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, provide base for overlaping of lining and sealing the same at top and bottom if reqd at site complete all as specified and as directed.

M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screw or L type or J type hook complete all as specified and directed.

S & F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering, fixed with self tapping screw or L type or J type hookcomplete all as specified and as directed.

Material and Labour for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 ( Gde E-165 ) complete all as specified and as directed .

M&L applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer on new steel surfaces of any description not exc 10 cm width or girth including preparation of surfaces, complete all as specified and directed.

M & L for MS rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates Fe 410- (Gde-E-250) quality-A complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified & directed.

M & L 50 mm thick PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in plinth protection finished the concrete surface even and smooth W/O using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in two layers (10mm + 5mm) on fair faces of brick/concrete or stone external surfaces in cement mortar 1:4 and finished even and fair complete with water proofing compound on outer layer complete all as specified and as directed. Note:-Water proofing compound shall be measured and paid separately under the respective item.

Supply only water proofing compound

M&L for 10 mm thick rendering on fair faces of brick/concrete or stone surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

M & L 15mm thick screed bed or bedding layer in cement mortar1:4 for laying floor finishes, finished even and fair complete all as specified and as directed.

M & L for Non skid tiles coloured flooring with tile size exc 0.06 sqm and n.exc 0.11 sqm each tile, 7-8mm thick of any colour pattern in floor set and jointed in grey cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified and as directed.

M & L for 10 mm thick light shade Vitrified tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete all as specified and as directed.

M & L for 10 mm thick light shade Vitrified tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete all as specified and as directed.

M&L Rendering 10 mm thick on wall and the like to receive tile in cement mortar (1:4), complete all as specified and as directed.

M&L Coloured glazed ceramic tiles glossy finish of size 450 x 300 x 7 to 8mm thick in dado’s/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete all as specified and as directed..

M & L 20 mm thick screed bed or bedding layer in cement mortar1:4 for laying floor finishes, finished even and faircomplete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for 18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

S&F of GI tubes medium grade with all fittings and fixed complete to walls 15mm dia bore complete all as specified and directed

All as per item No 55 above here in before but 20mm bore all as specified and directed

S&F in repairs vitreous China, semi-pedestal pattern (Anglo-Indian Type) water closet pan, white (excluding fixing bolts, flushing cistern and flush pipe), Seat and cover and trap , including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed.

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts.

S & F in repairs Health faucet with 01 mtrs long easy flex tube in chrome finish & wall hook complete all as specified & as directed. Make-Jaquar Cat No-ALD-565 or its equivalent as specified make.

S & F in repairs 15 mm bore long body Bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make-Jaquar Cat No-CON-107KN or its equivalent as specified make.

S & F in repair stop valve cast copper alloy, screwed down high pressure fancy type chromium plated 15mm dia with long shank & cup (concealed type) complete all as specified and as directed. Make:- Jaquar Cat No-CON-083 FTK of or its equivalent as specified make.

All as per item No 62 above but 15mm bore angle valve complete all as specified and as directed. Make:- Jaquar Cat No-CON-059KN or its equivalent as specified make.

S&F in repair vitreous china,white, wash hand basin with pedestal, flat back size 550x400mm 'including MS brackets including cutting for and pinning complete all as specified and as directed.

S&Fin repair basin mixer single liver without popup waste system with 450 mm long Braided Hoses complete all as specified and as directed. Make:- Jaquar Cat No VGP-81011B of or its equivalent as specified make.

S&Fin repair Wall mixer with provision for Overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges complete all as specified and as directed. Make:- Jaquar Cat No FLR-5273UPR of or its equivalent as secified make.

S&F in repairs 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed.

S & F in repair 150 x 150 mm overhead shower complete all as specified. Make :-Jaquar Cat No-OHS-1605 or its equivalent as specified make.

S & F in repair shower arm 400 x 25 x 25 mm square shape for wall mounted shower with flange complete all as specified and directed. Make :-Cat No-SHA-455L400 of Jaquar or equivalent.

S & F in repairs stainless steel sink for kitchen or laboratory with draining board made out of 1 mm thick overall size 915 x 460 mm with bowl size 410 x 330 x 160 mm with plugs, washers, and wastes; including bedding in cement mortar on dwarf walls, or fixed over brackets complete all as specified and as directed.

S & F in repair PVC flexible waste pipe 40mm bore and 1100mm length for WHB/sinks complete all as specified and directed.

S & F in repairs 32mm dia CP Waste coupling half thread with 80mm height for wash hand basin/sink complete all as specified and as directed. Make:- Jaquar Cat No ALD-709 or its equivalent.

S&Fin repair sink mixer with swinging spout (wall mounted Model) with connecting legs & wall flanges complete all as specified and as directed. Make:- Jaquar Cat No CQT-23309 or its equivalent as specified make.

S & F in repairs 110 mm dia PVC (SWR) pipe single socketed with rubber ring joints, laid in trenches or in walls including taking down old pipe complete all as specified and as directed.

S & F in repairs 75 mm dia PVC (SWR) pipe single socketed with rubber ring joints, laid in trenches or in floors including complete all as specified and directed.

S & F in repairs 110 mm dia PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and as directed.

S & F in repairs 110 mm dia PVC (SWR) vent cowl

S & F in repairs 110 mm dia PVC (SWR) bends any radius

S & F in repair for PVC (SWR) floor trap,plain with grating including jointing with solvent cement, dia of outlet 75 mm complete all as specified and as directed.

S & F in repairs 100 mm dia CP grating doom complete all as specified and as directed.

S & F in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F in repairs for Toilet paper Holder of Brass,Glossy finish all as specified and directed. Make:- Cat No ACN-1151N of Jaquar or equivalent.

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out ,returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm, watering,and removing surplus soil to a distance n exc 50 m and making good surface, hard/dense soil complete all as speicified and as directed.

Material and Labour PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling complete all as specified and as directed .

Material and Labour MS tube using ERW or induction butt welded tubes conforming to I.S 1161-1998 grade St-240 fixed independently by welding for post or in any other location complete all as specified and directed.

Supply and fix plates ( plain or chequered ) as per IS-3502 ( Base IS-10748 Gr-II ) square or rectangular cut or notched ( ordinary and counter shunk ) forming holes , without any attachment complete all as specified and as directed .

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed .

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut of 11 to 15 mm dia and exceeding 15 cm and n.exceeding 22.5 cm long complete all as specified and as directed.

Supply and fix 0.63 mm thick galvanised corrugated mild steel sheeting , Zinc coating 275 , grade 'B' with two corrugation side lap , fixed with L-type or J -Type hook or cranked hook bolt and washer as in roof covering complete all as specified and as directed .

Supply and fix Plain galvanised mild steel Sheeting 0.80 mm thick as in ridges , hips ,valley gutters drip and straight flashings ( length and girth as fixed ) with zinc coating of 275 gm /Sqm fixed with 'J' hook or suitable bolt complete all as specified and as directed .

Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth in camouflage pattern after preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc. complete all as specified and as directed .

Material and labour for Rolled Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed .

Surface excavation n.exc 30 cm deep and averaging 15 cm depth and getting out hard and dense soil complete all as specified and as directed .

Excavating trenches not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation and getting out hard/dense soil complete all as specified and as directed

Material and Labour for TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe- 500, complete all as specified & directed

All as per Srl item No. 96 but 5mm dia & over upto & including 10mm dia in stirrups, spacers and binders

Material and Labour for RCC (Nominal mix)1:2:4 type B1 as in beams complete all as specified and as directed .

Material and Labour for form work as in sides and soffit of floor or roof beams , beam haunchings girder s , bressummers , lintels , cantilevers , shelves moulding supports , overhangs etc also splays between floor and beams etc complete all as specified and as directed .

Material and labour for rendering 15mm thick on fair faces of brick works in CM 1:4 with WPC including finished even and fair complete all as specified and directed.

Material and labour for rendering 15mm thick on fair faces of brick works in CM 1:6 including finished even and smooth without using extra cement complete all as specified.

Material and labour for applying two coats of exterior acrylic emulsion paint of any shade in camouflage pattern over a coat of primer as approved by GE on new plastered surfaces of walls and the like etc and in any tint including preparation of new plastered surfaces complete all as specified and directed.

Returning,filling in , including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

Material and Labour for hardcore with broken stone or boulders n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and ramming to a true surface complete all as specified and as directed.

Material and labour for 100mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in subbase of floor complete all as specified & as directed.

Material and labour for Sand filling including watering and consolidation complete all as specfied and directed.

Material and labour plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and including necessary form work complete all as specified and directed.

Material and Labour for 40 mm thick DPC to horizontal surface of brickwork with cement concrete 1:2:4 Type B0 ( using 12.5 mm graded stone aggregate ) including necessary formwork and applying evenly a coat of blown type bitumen @ 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C1( using 20 mm graded stone aggregate ) as in flooring / plinth protection laid in alternative bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand ) including finish the surface even and fair complete all as specified and as directed.

Supply and fix Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .

Supply and fix Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws , locking arrangement etc. complete all as specified and directed .

Supply and fix 6 mm thick Figured glass, pin head type and glazing in squares exc 0.5 sq. m in each pane fixed with aluminium frame work complete all as specified and directed .

S & F Plain, Aluminium sheeting 0.71 mm thick , Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in sub-base of floor complete all as specified and directed .

Material and Labour for laying Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness of M-35 Grade with grey cement and pigment complete all as specified and directed.

E/M PORTION

Taking down carefully aluminum/copper point wiring (light/ fan/socket or power) complete with fittings such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCBs, Main switches from control board and making good disturbed surfaces of walls, floor to match with existing specifications complete all as specified.

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in Surface consealed conduit with pressed steel concealed Sunken boxes suitable for Modular Switch & Socket not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

Description all as per serial item No.119 here-in-before but for one bell Point .

Description all as per serial item No.119 here-in-before but for one 6 Amps socket outlet on the same board

Description all as per serial item No.119 here-in-before but for one 6 Amps socket outlet on the Independent board

M&L for point wiring complete with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring concealed in wall/false ceiling with pressed steel concealed Sunken boxes suitable for Modular Switch & Socket not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 2.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

S&F modular switch , 6 Amp singe pole one way.

S&F modular socket 2/3 pin, 6 amp multipurpose.

S&F modular switch , 16 Amp, single pole one way.

S&F modular socket multipurpose 16 amps.

S&F modular switch , 6 Amp Bell Push singe pole one way. Note;-( For Ser. Item No 124 to 128) The rate will be inclusuve of suitable cover,and module frame for group of switches,sockets etc all as required as per site requirement.

Ceiling rose, surface bakelite 65 x 50mm, two to three terminals complete all as specified and as directed.

Lamp holder, insulated body, cord grip pattern SP 230 volt, complete all as specified and as directed.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through PVC surface/concealed conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 6.00 sqmm main cable and one RM of 6.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through PVC surface/concealed conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 10.00 sqmm main cable and one RM of 10.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L in repair of single pole and earth encloser with three pin and earth plug plus neutral with socket 20 Amps 240Volts complete indrustial type with Tripple pole MCB complete all as specified and directed IP-30 protation

Supply and fix in repair of Vertical three phase distribution board, VTPN, 8 way 440 volts having HSNCODE 8537 protection, double door with provision for fixing of MCCBs as incomer and MCBs as outgoing complete all as specified and as directed

Supply and fix in repair of MCCB 4P 100 Amps, 415 Volts, having breaking capacity complete all as specified and as directed.

Supply and fix in repair of MCB SPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic accessories therein & disposing from site complete all as specified and as directed. Make:CAT PART NO:408618 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

Supply and fix in repair of MCB TPN 40 Amps, 240 Volts, 240 Volts, having breaking capacity 10 kA 'C' characterstic including accessories therein & disposing from site complete all as specified and as directed.

Supply and fix in repair of MCB single pole, 6-32 Amp, 240 Volts, having breaking capacity 10 kA 'C' characterstic including accessories therein & disposing from site complete all as specified and as directed.

Supply and fix in repair of MCB distribution board having IP-54 protection, powder coated, double door, flush mounted complete with locking arrangement suitable for 12 way SPN with 200 Amp rated bus bar 230 volt AC supply including accessories therein & disposing from site complete all as specified and as directed.

S&F in repairs indoor decorative 20 Watt LED Light fitting four feet PVC batten housing LED batten type luminaire high efficiency electronic driver, (lumen output not less than 2000 lumen), power factor more than 0.9 colour temperature not less than 6000K, LED driver with PVC insulated copper conductor complete all as specified..

Supply and fix in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting complete all as specified and as directed.

S&F in repairs Recess mounting type LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx) system wattage 36 watt to 42 watt (cool white), minimum system lumen efficacy not less than 100 lumper watt, CRI not less than80, colour temperature not less than 6000 K, power factor not less than 0.95, LED driver IP protection IP 20, powder coated housing with ashthetic bottom frame, suitable for any type of ceiling system including connection with PVC insulated copper conductor complete all as specified. (Make Havells/Bajaj/CG or Equivalent.)

S&F in replacement LED retrofit lamp with maximum wattage 9 watt with B 22 holder base with thermal conductive engineering plastic white colour housing and aluninium heat sink with specially designed fins clear/cool white, power factor more than 0.9, , color temperature not less than 6000K, CRI more than 80, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, glarefree, 0 UV radiation complete all as specified

Supply and fixing in repair of LED Building light of 35 watt, IP66 power coated pressure die cast aluminium compact high power LED buildimg light with heat resistant toughened glass complete with GI pipe bracket light grade 1.2m long of suitable bore fixed on wall with GI clamps, nuts and bolts of suitable size ,Luminan efficancy 100 lm/watt along with surge protator all as specified and as directed. .

Supply and fixing steel body Exhaust fan Single phase 230 Volt of 300mm sweep with blade and frame and with lovour including making hole rendering / civil work if requied complete all as specified and as directed.

Supply, laying, jointing and testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium condutor 1100 volts grade of size 95 Sqmm 3.5 core laid on walls/floors or in air with saddles and gutties complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and foundation of poles, stays and getting out in any type of soil, all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and as directed by Engineer-in-Charge.

M & L for Sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. by Engineer-in-Charge. Note: Punned thickness of sand shall be measured.

M&LCommon burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection.

Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth burried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using copper earth lead wire 4.0 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion.

Supply and fixing of Earth continuity conductor or main 4 mm Galvanised iron wire fixed to wall on batten or recess or chases including or drawn in conduit/pipe or fixed to poles or any other indicatedsituation for loop earthing etc. Complete all as specified and as directed

Supply and fixing of Earth continuity conductor or main25x 4 mm Galvanised iron strip fixed to wall on batten or recess or chases including or drawn in conduit/pipe or fixed to poles or any other indicatedsituation for loop earthing etc. Complete all as specified and as directed

Supply and fixing of Porcelain Insulators of size not less than 75mm long and 30mm thick for fixing earthing strips fixed with suitables screws, nut, bolts and washers etc complete all as specified and directed by Engr-in-Charge

Supply and fixing steel body Exhaust fan AC Single phase 230 Volt of 450mm sweep with blade and frame and louvers lovour including making hole rendering / civil work if requied complete all as specified and as directed.

Air termination single pointed copper rod,12mm dia 300mm long. Fixed a top roof of the building including drilling holes as required for making system for attaching complete all as specified and as directed.

M&L on Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25mm, drilled and screwed including 3 Nos 8mm dia 25mm long hex. head screw, complete all as specified and directed.

Suppy and fixing in repair of GI tube light grade of bore 25 mm with all fittings and fixed complete to walls and ceiling or laid in floor for cable crossing including cutting of bitumen roads/PCC and making good after laying of cable up to building height complete all as specified and directed by Engr in charge

Suppy and fixing in repair of GI tube light grade of bore 80 mm with all fittings and fixed complete to walls and ceiling or laid in floor for cable crossing including cutting of bitumen roads/PCC and making good after laying of cable up to building height complete all as specified and directed by E ngr in charge

Supply and fixing of PVC Exhaust fan 250MM strong air suction ,Rust proof body and dust protation shutters complete all as specifeid and as directed.

Supply and fixing of PVC Air Ventilation Exhaust fan sweep 100mm Speed 2500 RPM complete all as specifeid and as directed.

Supply and fixing of LED 12 Watt Photo frame light/wall Mirror Vanity Light/BathroomDressing table light With 3step ligt White Warm and Neutral White) complete all as specified and ass directd

Cutting the existing any type of wall, making hole for inserting fixing of exhaust fan nuts/bolts including washer complete all as specified.

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in concealed in wall/false ceiling with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

S&F switch piano, flush type, 5 amps single pole, one way complete all as specified and as directed.

Supply and install hi wall hot and cold inverter Split Ac copper SAC 245V ADZ (R22) whitec type split units indoor/outdoor complete with cordless remote control unit and with cooling and heating function of capacity of 1..5 ton BEE 3 Star Compressor Type High EER3.2 twin rotary BLDC copper condenser coil Better cooling and requires low maintaince special features Dust filter Air Purifier connecting pipe Type cu (15.87mm & 6.35mm connecting copper pipe Length3.5 mtr connecting cable3.5 m eter complete of Engineer-in-Charge, all as directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA complete all as specified .

M&L for point wiring complete with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in Surface PVC Conduit with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 2.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. [ Make of cable - Finolex / Havell's / Anchor/KEI/ Polycab ]

M&L Sheet metal enclosures for single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole mcb 20 Amp 240 Volt complete all as specified and as directed.

M&L in repair of MCB distribution board having IP-54 protection, powder coated, double door, flush mounted complete with locking arrangement suitable for 4 way SPN with 200 Amp rated bus bar 203 volt AC supply including taking down existing old US including assesories therein & disposing from site complete all as specified

S&F -03 layers of polyester fabric coared with insulation nanomaterials used alongwith 02 layers of PU foam to create an air gap, faceltate with zipper on cover for easy access to top. Thickness of cover shall not less than 02 cm suitable for 40 °C ± 5°C to -15 °C ± 5°C suitable for size of PVC tank 500 ltrs complete all as specifed and as directed.

S&F -03 layers of polyester fabric coared with insulation nanomaterials used alongwith 02 layers of PU foam to create an air gap, faceltate with zipper on cover for easy access to top. Thickness of cover shall not less than 02 cm suitable for 40 °C ±5°C to -15 °C ± 5°C suitable for size of PVC tank 1000 ltrscomplete all as specifed and as directed.

All as above srl item No. 174 but with heating element capacity -05 KW/1-KW. The electic elements are covered with polyester nonwovel fabric with 2.5 sqmm -3 core PVC insulated and PVC sheathed copper conductor with plug top. The length of copper conductor shall not to be less than 20 RM all as specified and directed of 500 Ltr PVC water tank complete all as specifed and as directed.

All as above srl item No. 174 but with heating element capacity -05 KW/1-KW. The electic elements are covered with polyester nonwovel fabric with 2.5 sqmm -3 core PVC insulated and PVC sheathed copper conductor with plug top. The length of copper conductor shall not to be less than 20 RM all as specified and directed of 1000 Ltr PVC water tank complete all as specifed and as directed.

M&L 03 layers fo polyster fabric coated with insulation nano materials used with 02 layers of PU foam to create air gap, suitable of water tubing cover with velcro for griping around the pipe alongwith taping reinforced or plastic ties, the pipe cover thickness shall not be less than 02 cm all as specified and directed for 40 °C ± 5°C to -15 °C ± 5°C of following size of wate pipes.complete all as specifed and as directed.

25 mm dia

50 mm dia

Supply and fixing MCB SPN 40 Amps rating 240 V, 10KA 'C' curve miniature circuit breaker following poles and current carrying capacity in the 200 Amps MCB DB complete with connection testing and commissioning of capacity of complete all as specified and as directed

PARAS RAM ASGOTRA AND SONS