Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 CrAdmitted-Finance | ₹8.8 Cr | L1 | Admitted-Finance |
| 2 | L2₹8.9 Cr+₹14.8 L (1.69%)Admitted-Finance | ₹8.9 Cr+₹14.8 L (1.69%) | L2 | Admitted-Finance |
| 3 | L3₹8.9 Cr+₹15.2 L (1.73%)Admitted-Finance | ₹8.9 Cr+₹15.2 L (1.73%) | L3 | Admitted-Finance |
| 4 | L4₹9.4 Cr+₹63.0 L (7.17%)Admitted-Finance | ₹9.4 Cr+₹63.0 L (7.17%) | L4 | Admitted-Finance |
| 5 | L5₹9.5 Cr+₹74.4 L (8.47%)Admitted-Finance | ₹9.5 Cr+₹74.4 L (8.47%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | PRAGATI TOWERS CORPORATION L1 | Bharat Boring Company L13 | sunandhard L6 | Gian Chand Contactor L2 | Himalyaboring compay L10 | Desh Raj Sharma L12 | Chauhan Borewell L17 | Shiv Drillers L8 | M/S Him Ganga Boring L14 | Expert Drillers L5 | shivalik borewell L15 | Mohinder Kumar Gupta L16 | UPASANA BOREWELL & ALLIED SERVICES L7 | M/S Hari Om Drillers L3 | Gopal Mahajan L4 | SWAMI RAMJI BORE WELLS L9 | M/S Ishan Thakur L11 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Providing and Installation of India Mark-III (65mm),India Mark-II (50mm) & India Mark-II extra deep (32 mm) deepwell hand pumps as per IS: 13056-1991 alongwith its uptodate amendments and IS: 9301 respectively comprising of following items: | ||||||||||||||||||||
| 2.00Transportation of suitable truck/ tractor mounted where only tractor road available,DTH & ODEX / Percussion Calyx /RC drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per directions of Engineer-in-Charge | ||||||||||||||||||||
| 3.00 | Non Tribal Area | 250 | Nos. | 10,000 ₹25,00,000 | 8,600 ₹21,50,000 | 8,000 ₹20,00,000 | 8,200 ₹20,50,000 | 8,600 ₹21,50,000 | 9,000 ₹22,50,000 | 9,999 ₹24,99,750 | 8,500 ₹21,25,000 | 9,000 ₹22,50,000 | 9,500 ₹23,75,000 | 9,000 ₹22,50,000 | 9,000 ₹22,50,000 | 8,500 ₹21,25,000 | 5,500 ₹13,75,000 Lowest | 6,000 ₹15,00,000 | 8,544 ₹21,36,000 | 8,580 ₹21,45,000 |
| 4.00Drilling bores of 165 mm dia. as per IS: 2800-1979, using DTH from ground level in the overburden as per directions of the Engineer-in-charge/Hydrogeologist, with suitable rigs for drilling through rocky formations consisting of sandstone, limestone, dolomites, conglomerate, boulder pebble, gravels, silt , clay,or any other type of sedimentary, metamorphic and igneous rocks including cost of attachments, consumable stores, bits, water,POL etc. complete in all respects as detailed below: | ||||||||||||||||||||
| 5.00Non Tribal Area | ||||||||||||||||||||
| 6.00 | From 0 m to 10 m depth. | 500 | Rmt | 700 ₹3,50,000 Lowest | 1,150 ₹5,75,000 | 1,130 ₹5,65,000 | 1,100 ₹5,50,000 | 1,180 ₹5,90,000 | 1,200 ₹6,00,000 | 1,240 ₹6,20,000 | 1,150 ₹5,75,000 | 1,400 ₹7,00,000 | 980 ₹4,90,000 | 1,175 ₹5,87,500 | 1,250 ₹6,25,000 | 800 ₹4,00,000 | 1,040 ₹5,20,000 | 1,100 ₹5,50,000 | 1,154 ₹5,77,000 | 1,155 ₹5,77,500 |
| 7.00 | Beyond 10 m. | 3,300 | Rmt | 850 ₹28,05,000 Lowest | 1,360 ₹44,88,000 | 1,300 ₹42,90,000 | 1,250 ₹41,25,000 | 1,370 ₹45,21,000 | 1,380 ₹45,54,000 | 1,440 ₹47,52,000 | 1,358 ₹44,81,400 | 1,425 ₹47,02,500 | 1,000 ₹33,00,000 | 1,370 ₹45,21,000 | 1,480 ₹48,84,000 | 900 ₹29,70,000 | 1,225 ₹40,42,500 | 1,250 ₹41,25,000 | 1,364 ₹45,01,200 | 1,359 ₹44,84,700 |
| 8.00Drilling bores of 152 mm dia. as per IS: 2800-1979 using ODEX ( TUBEX) attachement required drilling in collapsible strata conglomerate , boulder, pebble, gravals, silt , clay etc. including cost of attachments, consumable stores, bits, water,POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25 mm dia. Advani Oerlikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directionss of Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. | ||||||||||||||||||||
| 9.00 | Non Tribal Area | 15,200 | Rmt | 1,700 ₹2,58,40,000 Lowest | 2,300 ₹3,49,60,000 | 2,275 ₹3,45,80,000 | 2,050 ₹3,11,60,000 | 2,315 ₹3,51,88,000 | 2,325 ₹3,53,40,000 | 2,420 ₹3,67,84,000 | 2,310 ₹3,51,12,000 | 2,200 ₹3,34,40,000 | 1,900 ₹2,88,80,000 | 2,450 ₹3,72,40,000 | 2,410 ₹3,66,32,000 | 2,200 ₹3,34,40,000 | 2,100 ₹3,19,20,000 | 2,200 ₹3,34,40,000 | 2,324 ₹3,53,24,800 | 2,320 ₹3,52,64,000 |
| 10.00Drilling bores of 115 mm dia. as per IS: 2800-1979 from bottom of overburden to required depth in conglomerate, collapsible strata and rocky formations complete in all respects as per directionss of the Engineer-in-Charge/ Hydrogeologist. | ||||||||||||||||||||
Tender Value
₹9.1 Cr
EMD Value
₹50,000
Closing Date
28 Jul 2023, 11:00 amClosed
JSV Division Hamirpur
JSV Division Hamirpur
Providing and Installation of 250 Nos. India Mark-III 65 mm and Mark-II 32 mm deep bore well hand pumps in different Divisions under Hamirpur Zone (HZ) of Himachal Pradesh for the year 2023-24
2023_HPIPH_76395_1
EE-JSV-E-tenders-2023-24
Open Tender
Civil Works
Item Rate
365 days
JSV Division Hamirpur
Please refer Tender documents.
13 documents required · 13 mandatory
₹2,500
JSV Division Hamirpur
₹50,000
Yes
Chief Engineer Jal Shakti Vibhag Hamirpur Zone
24 Aug 2023
19 Jul 2023
28 Jul 2023
19 Jul 2023
28 Jul 2023
19 Jul 2023
24 Jul 2023
Amount
Providing and Installation of India Mark-III (65mm),India Mark-II (50mm) & India Mark-II extra deep (32 mm) deepwell hand pumps as per IS: 13056-1991 alongwith its uptodate amendments and IS: 9301 respectively comprising of following items:
Transportation of suitable truck/ tractor mounted where only tractor road available,DTH & ODEX / Percussion Calyx /RC drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per directions of Engineer-in-Charge
Non Tribal Area
Drilling bores of 165 mm dia. as per IS: 2800-1979, using DTH from ground level in the overburden as per directions of the Engineer-in-charge/Hydrogeologist, with suitable rigs for drilling through rocky formations consisting of sandstone, limestone, dolomites, conglomerate, boulder pebble, gravels, silt , clay,or any other type of sedimentary, metamorphic and igneous rocks including cost of attachments, consumable stores, bits, water,POL etc. complete in all respects as detailed below:
Non Tribal Area
From 0 m to 10 m depth.
Beyond 10 m.
Drilling bores of 152 mm dia. as per IS: 2800-1979 using ODEX ( TUBEX) attachement required drilling in collapsible strata conglomerate , boulder, pebble, gravals, silt , clay etc. including cost of attachments, consumable stores, bits, water,POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25 mm dia. Advani Oerlikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directionss of Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately.
Non Tribal Area
Drilling bores of 115 mm dia. as per IS: 2800-1979 from bottom of overburden to required depth in conglomerate, collapsible strata and rocky formations complete in all respects as per directionss of the Engineer-in-Charge/ Hydrogeologist.
Non Tribal Area
Supplying and lowering of IS Marked 125 mm dia. PVC casing pipe medium class 5 mm thick screwed and socketed as per IS : 12818- 1992 (Part-I) with up to date amendment electric resistance welded including cost of all cutting, factory threadings, welded including cost of all cutting factory threadings, welded, wherever required in random lengths of 6.00 meters including transportation charges. (For DTH bores) complete in all respect as per direction of Engineer-in-Charge.
Non Tribal Area
Supplying and lowering of IS Marked 125 mm NB 5 mm thick fin cut MSERW casing pipes as per IS 4270:2001 and requriement of ODEX attachments from approved manufacturing complete in all respect as per direction of Engineer-in-Charge.
Non Tribal Area
Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directionss of Engineer-in-Charge.
Non Tribal Area
Collection and preservation of soil samples in polythene bags complete in all respects as per directions of Engineer-in-Charge.
Non Tribal Area
Development of borewell and yield testing with air- compressor through V notch and disinfection etc. complete in all respects as per IS :2800- 1979 and as per directions of Engineer-in-Charge.
Non Tribal Area
Supplying and lowering of IS marked riser pipes, medium class screwed and socketed and welded as per IS: 1239-1990 (Part-I) with upto date amendments, electric resistance welded including cost of all cuttings , threadings and welding, wherever required , in random lengths of 3 mtrs. inclusive of transportation charges to the site complete in all respects as per directions of Engineer-in-Charge. The seamless sockets shall be provided as per IS: 13056-1991
Non Tribal Area
65 mm dia GMS pipes(M)
32 mm dia GMS pipes (M)
Supplying and erection of IS marked India Mark-III deepwell hand pumps (65mm) conforming to IS: 13056-1991 consiting of pump head assembly, cylinder assembly and seven connecting rods complete in all respect, for installation up to 30 m depth as per directions of Engineer-in-Charge.
Non Tribal Area
Supplying & erection of IS marked India Mark-II extra deepwell hand pump (32mm)conforming to IS: 9301 consiting of pump head assembly, cylinder assembly and seven connecting rods complete in all respect, for installation beyound 30 m as per directions of Engineer-in-Charge.
Non Tribal Area
Providing and fixing of extra connecting rods of 3 mtr. length in hand pumps as per site conditions complete in all respect as per directions of Engineer-in-Charge.
Non Tribal Area
C/O Paltform / Khura with providing and laying cement concrete 1:2:4 (1cement : 2 sand : 4 graded stone aggrigate, 20 mm nominal size) as per standard drawing including cost of earth work in founadation, form work, curing complete in all respects in all leads and lifts and as per directions and entire satisfaction of Engineer-in-Charge .
Non Tribal Area
Gian Chand Contactor
M/S Hari Om Drillers
Gopal Mahajan
Expert Drillers
sunandhard
UPASANA BOREWELL & ALLIED SERVICES
Shiv Drillers
SWAMI RAMJI BORE WELLS
Himalyaboring compay
M/S Ishan Thakur
Desh Raj Sharma
Bharat Boring Company
M/S Him Ganga Boring
shivalik borewell
Mohinder Kumar Gupta
Chauhan Borewell
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.60 MB
Form8.pdf
Tender Documents • 1.10 MB
Handpumpterm.pdf
Tender Documents • 0.02 MB
Terms.pdf
Tender Documents • 0.08 MB
BOQ_114254.xls
BOQ • 0.28 MB
F6.pdf
Tender Documents • 0.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .