For Selection of working agency for execution of Deposit work in EDD Fatehpur UNDER EDC BARABANKI , MVVNL, BARABANKI

Amount

Safe Loading Carriage including unloading and proper stacking of following materials from Central Store Barabanki/JE Store to site of Work.

a) ST Pole

b) PCC pole

c) ACSR Wesal Conductor

d) 11 KV Pin /Disc insulator with fiting

e) Stay set

f) Earthing

g) T/F 16/10 KVA

h) T/F 25 KVA

i) T/F 63 KVA

j) T/F 100 KVA

k) T/F 250 KVA

l) ABC 1X25+1X16 SQ MM

m) ABC 3X50+3X70 SQ MM

n)D.B.BOX

o) 11 KV CT/PT Unit

p) 11 KV metering cubical

q)11 KV XLPE Cable 3X70/ 3X120 Sq.mm.

r) other line material

s)Cable jointing kit 3x70 sq mm/ 3x120 sqmm

Dragging of pole

Fabrication, errection plinthing of Substain type double pole on 11/9/8.50 M ST/PCC Pole including mounting of Clamps with nut & bolts, top channel, dropper Channel, substation base Angle, 33 KV Pin Insulator with pin Insulator Poles will be planted on Stone pad of size 300x300x75 mm

Fabrication, errection plinthing of Substain type Single pole on 8.5/9/11 M PCC/ST Pole including mounting of Clamps with nut & bolts, top channel, dropper Channel, substation base Angle, 11 KV Pin Insulator with pin Insulator Poles will be planted on Stone pad of size 300x300x75 mm

Erection of Stay set of 16x1800 mm rod duly painted with red oxide, anchor plate, thumble turn buckle and stay insulator etc. digging of pit of size 0.4x0.6x1.6 m for grouting by 1:3:6 cement concrete, with stay of size 7/8 swg, nuzzling & grouting.

Stringing and Sagging of 11 KV line with ACSR Weasel Conductor including nuzzling, binding and jumpering (Weasel Conductor will be provided by the department)

Stringing and Sagging of LT line with ABC(1X25+1X16 including nuzzling, binding and jumpering (ABC will be provided by the department)

Stringing and Sagging of LT line with ABC(3X50+3X70 including nuzzling, binding and jumpering (ABC will be provided by the department)

Earthing of Poles with M.S. Earthing Rod of size 20x2500 mm as per specification.

Supply & Fixing of Nut & Bolts

Supply & Fixing of Top/T-off/dropper/ t/f holding clamps

Dead End Clamp With I- hoock

Suspenssion clamp

Peircing Connectors.

pole clamp for ABC

Installation and commissioning of following capacity of Transformer including its connection in between 11 KV and LT line mounting of copper L-Pieces, Providing Crimping type Aluminium lugs of required lugs of recuired sizes. (All the material except transformer will be arranged by the contractor)

Lopping and chopping of tree branches in laying on the route of line

Laying of 11 XLPE Cable 3X70 mm 3x120 mm by drill method

Hoisting of 11 kV 3x70 or 3x120 sq. mm XLPE cable on Single Pole with proper jumpering. The cable will be passed through MS pipe of sixes 100 mm dia.

Supply of GI pipe 6 " dia

Making of Cable joint with required material

Installation & fuxing of 11 KV CT /PT unit with required material

Installation & fuxing of 11 KV pilfher unit with required material.

Installation of D.B. BOX

Suplly/Fixing of different size of lug

Concreating and plinthing of ST Pole 18x24 Centimeter

Construction of masonry type t/f plinth of size 2X2X1.5 M brick , cement coarse sand and brick ballast ,filling of sand in hellow space , plastring outer surface in ratio 1:4:6 top of the plinth 4" thickness grouting of 2 nos. MS Channel of size 100X50X2000 mm on the top of the plinth for replacement of T/F ( All the material should be arranged by the contractor)

Construction of rataining wall, fabrication & erection of wiremesh fencing of size 5+3 &2.0 M height around T/F and with retaining wall & 1 no. gate with locking arrangement made of MS angle iron of size 50X50X6 mm jointed with nut & bolts . The panel must be supported with MS flat of size 50X6 mm. Wiremesh of size 10 SWC rectangle type , its painting as per norms of RESO( All the material should be arranged by the contractor)

Boring type earthing of Metering cubical by boring and lowering of 20M deep or upto water level 1.5" dia B class' Jindal make GIPipe its connection in between transformer and boring with G.I. Strip of size 50x6 mm (All the material will be arranged by the contractor)

Guarding of 11 KV line with GI Wire of Size 8 SWG as per RESSPO Norms.

M/S R.L. ENGINEERING

M/S LAL BAHADUR CONTRACTOR