SPECIAL REPAIRS AND ADDITION ALTERATION TO BUILIDNG NO P 2 AT OLD OTM TUTICORIN AND PROVISION OF FENCING AROUND 100 KVA SOLAR PLANT AT CGRA TUTICORIN UNDER GE(I) CG CHENNAI

Amount

Material and labour for Complete removal of existing treatment on wall surfaces and applying two coats of acrylic distemper over a coat of wall care putty of thickness 1.5mm and alkali resistant primer complete all as specified and as directed.

Material and labour for Preparation of old painted surfaces of ceilings and applying one coat of acrylic distemper complete all as specified and as directed.

Material and labour for Preparation of old painted surfaces and applying one coat of weather proof exterior emulsion over a coat of primer on external surfaces of wall complete all as specified and as directed. Make: Apex Ultima from M/S Asian Paints Limited

Taking down chowkhats or frames not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 sqm and not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down shutters with fittings of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each and taken as credit complete all as specified and as directed.

Material and labour for Second class hard wood plain, solid , hard wood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix Flush shutters 30 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides with face is covered with decorative face venner with lipping/frame to match complete all as specified and as directed.

Supply and fix factory made Second class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) fitted with cut and mitred beads for securing glass etc,stiles and rails sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to chowkat complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC Ç'channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips ,rubber packing, anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Material and labour for Prelaminated particle board 18/19 mm thick ,interior grade ,prelaminated both side with decorative choice laminations with lipping fixed with screws to timber frame work in repairs etc complete all as specified and as directed.

Material and labour for Preparation of new wooden surfacesof any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Second class hardwood. Plain fillets square, rectangular or triangular in section not exc 3 Sqcm, clean sawn, secured with nails or brads for Cup boards complete all as specified and as directed.

Supply and fix 125 mm Butt hinges,Stainless steel ISI Marked, and fixed complete all as specified and as directed.

Supply and fix 100 mm Butt hinges,Stainless steel ISI Marked, and fixed and fixed complete all as specified and as directed.

Supply and fix 200 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed to door with MS screws complete all as specified and as directed

Supply and fix 150 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or entruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed complete all as specified and as directed.

Supply and fix hasp and staple ,safety type ,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 100 mm complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for Double Charged Virtified tiles 10 mm thick polished , area of each tiles exceeding 0.36 sqm but not excedding 0.42 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Double Charged Virtified tiles 10 mm thick polished , area of each tiles exceeding 0.36 sqm but not excedding 0.42 sqm in skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Glazed ceramic coloured tiles , Premium quality in vertical surface such as skirting,Dado/Risers of size 350mmx250mm x7 mm thick/450x350x x 6mm/7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 10 mm thick complete all as specified and as directed. Note :Make of Glazed ceramic tile:Johnson/Khajaria/Somany

Material and labour for Granite stone 20mm thick (black galaxy) work (table rubbed and polished) in single piece in steps, jambs, pillars, window- cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a backing coat of 15mm thick cement mortar 1:4 complete all as specified and as directed.

Supply and fix Plain sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed .

Supply and fix powder coated aluminium grill DG 916 of 10mm dia rod square/ rectangular/ circular or similar type of shape, aperture not exc 7 cm in length or width fixed with 'H' or 'F' channel of size 38mm x 12 mm x 1.30mm (Sec No 8778) Make : Grill No 20 of DECOREL complete all as specified and as directed.

Supply and fix frosted sheet glass 4mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane fixed to aluminum frame complete all as specified and as specified

Taking up or down of unservicable/rusted steel tubing 25 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 20 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 15 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix 32 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 (PN 16 & PN 10) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix in repair PVC valveless lowlevel flushing cistern 10 litres capacity with complete accessories fixed with in let ball valve and necessary mild steel brackets and fixing of chain and pully or lever if any and including provision offlush pipe of polyethyleneof 32 mm dia complete all as specified and as directed.

Supply anfd fix in repairsplastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices complete all as specified and as directed

Supply and fix in repairs vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated shower rose size 125 mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type, long body 15mm dia bore Bib tap , cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair Fancy type chromium plated pillar taps, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type 15mm dia bore Angle stop valve , cast copper alloy , screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges including brackets complete all as specified and as directed.

Supply and fix in repairs CP hand shower( health faucet) with 15 mm dia and 1500mm long flexible tube with wall hookcomplete all as specified and as directed.

Supply and fix in repairs 20 mm dia Aluminium powder coated curtain rods fixed over windows/door openings complete all as specified and as directed

Supply and fix in repairs 20 mm dia fancy Aluminium powder coated knobs/brackets for fixing curtain rod of 20 mm diameter complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc including removal of debris outside MD land complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:4, ,15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc. n.exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.

Demolition and breaking up drain pipe, 150 mm dia( salt glazed stone ware or AC or reinforced cement concrete) set in cement mortar complete all as specified and as directed.

Material and labour fot Reinforced cement concrete Class NP2 pipes ISI Marked ,150 mm bore with one collar per length of pipe complete all as specified and as directed

Material and labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipes of 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Supply and fix in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris outside MD land complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded granite stone aggregate as in plinth protection and pavings finished fair and even without using extra cement including making grooves at junction of existing wall and in plinth protection at 2.50 meter c/c complete all as specified and as directed.

Supply and fix in repairs75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings and taking down old unserviceable PVC pipe of 75 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix in repairs 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings and iincluding taking down old unserviceable PVC pipe of 110 mm dia complete all as specified and as directed.Make:Finolex/Supreme

Supply and fix PVC (SWR) floor trap of 75/110 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix PVC (SWR) gully trap of 125/110 mm dia of outlet , setting and jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply anfd fix in repairs Vitreous china wash down water closet pan (pedestal pattern ),white ( including fixing bolts ) including connection to drain pipe and to flushing pipe etcand removing old one and taken as credit complete all as specified and as directed

Taking down cement plaster /tiles on roof including raking out joints,hacking for key,scrubbing down with water including removal of debris outside MD land complete all as specified and as directed. complete all as specified and as directed.

Supply and fix Heat Resistant/Cool roof Terrace Tiles (300 mm x 300 mm and 8 to 10 mm thick) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 15 mm thick screed bed in CM 1:4 and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including providing skirting upto 150 mm height along the parapet walls in the same manner over a rendering of 15mm thick in CM 1:3 with water proofing compound in the terrace floor and skirtings complete all as specified and as directed. Make:Johnson Endura/Khajaria Note:Water proofing compound will be measured and paid separately.

Supply only Intergal Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

Supply and fix sink made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fix stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Supply and fix in repair Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed Make:Armstrong/M/SGproc.

Material and labour for providing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal framework and reinforced with G.I. wire mesh in repairs complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for Precast cement concrete 1:2:4 type B1 (using 20mm graded granite stone aggregate) in landings, cover slabs (for manholes etc) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and as directed.

Dismantling water tanks of capacity 500 litres complete all as specified and as directed

Supply and fix in repairs Rotational moulded polyethylene water storage triple layer white tanks 750litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified

Supply and fix in repairs Gun-metal, globe or gate valves 25mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

Supply and fix in repairs Ball valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed

Supply and fix in repairs Modular Bell push 6A 1 module including taking down old unserviceable bell push and taken as credit complete all as specified and as directed. Make:-ANCHOR MODEL NO:PENTA 65003/LEGRAND/SCHNIEDER

Supply and fix in repairs Call bell ding dong, AC, 230 V, single pole, including taking down old unserviceable calling bell and taken as credit complete all as specified and as directed. Make:- Anchor/Rider

Supply and fix in repairs Modular switch 6 Amps ,single pole, one way ,one module , 240V AC,including taking down old unserviceable modular switch and taken as credit complete all as specified and directed. Make:-ANCHOR MODEL NO:PENTA 65001/LEGRAND/SCHNIEDER

Supply and fix in repairs Modular switch 1 way 16A, 1 module including taking down old unserviceable switch socket and taken as credit complete all as specified and directed. Make:-ANCHOR MODEL NO:PENTA 65007/LEGRAND/SCHNIEDER

Supply and fix in repairs Modular socket 6A - 2/3 pin combined 2 module, including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make:-ANCHOR MODEL NO:PENTA 65222/LEGRAND/SCHNIEDER

Supply and fix in repairs Modular socket 16A - 2/3 pin combined 2 module, including taking down old unserviceable switch socket and taken as credit complete all as specified and directed Make:-ANCHOR MODEL NO:PENTA 65266/LEGRAND/SCHNIEDER

Supply and fix in repairs Stepped type electronic fan regulator flush type , socket type , 230V on the existing phenolic laminated sheet including taking down old unserviceable one and taken as credit complete all as specified and directed Make:-ANCHOR MODEL NO:PENTA 65402/LEGRAND/SCHNIEDER

Material and labour for Painting of ceiling fan/Exahust fan/DB panel of any size/make/model complete in site with synthetic enamel paint by spray painting including filling cavities with filler after cleaning all dust etc and numbering of ceiling fan complete all as specified and directed .

Supply and fix in repairs single pole and netural enclosure with 2-pin and earth plug and socket complete with single pole MCB 20 Amp capacity including fixing in walls dully embedded complete all as complete directed. taken as credit complete all as specified and as directed. Make:- ANCHOR/LEGRAND/ABB

Supply and fix in repairs modular white cover plate with frame 2 Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR MODEL NO:GINA PLATE 65802/LEGRAND/ABB

Supply and fix in repairs modular white cover plate with frame 3- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR MODEL NO:GINA PLATE 65803/LEGRAND/ABB

Supply and fix in repairs modular white cover plate with frame 4- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR MODEL NO:GINA PLATE 65804/LEGRAND/ABB

Supply and fix in repairs modular white cover plate with frame 6- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR MODEL NO:GINA PLATE 65806/LEGRAND/ABB

Supply and fix in repairs modular white cover plate with frame 8- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:-ANCHOR MODEL NO:GINA PLATE 65808/LEGRAND/ABB

Supply and fix in repairs modular GI sheet metal flush box(18 Gauge) for 2 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR MODEL NO:35640/LEGRAND/ABB

Supply and fix in repairs modular GI sheet metal flush box(18 Gauge) for 3 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR MODEL NO:35650/LEGRAND/ABB

Supply and fix in repairs modular GI sheet metal flush box(18 Gauge) for 4 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR MODEL NO:35661/LEGRAND/ABB

Supply and fix in repairs GI sheet metal flush box(18 Gauge) for 6 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR MODEL NO:35672/LEGRAND/ABB

Supply and fix in repairs GI sheet metal flush box(18 Gauge) for 8 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR MODEL NO:35683/LEGRAND/ABB

Supply and fix in repairs MCB SP of rating 6-40Amps , 240 V, C curve ,Rupturing capacity10KAincluding taking down old unserviceable MCB of any rating and taken as credit complete all as specified and directed Make:- Siemen/Legrand/Schneider

Supply and fix in repairs MCB TPN of rating 63 Amps, 415 V, C curve ,Rupturing capacity10KA ncluding taking down old unserviceable MCB of any rating and taken as credit complete all as specified and directed Make:- Siemen/Legrand/Schneider

Supply and fix in repair ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Supply and fix High efficiency 1x1 feet recess mounted type Flat panel 15W ,230 V, LED luminaire,Minimum 6000 K. 90 Lumens/watt with suitable integral electronic drivers ,CRCA/poly carbonate type suitable for amstrong/grid ceiling with super bright LED etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old U/S CFL fittings complete all as specified and as directed Make: Wipro/crompton greaves/Philips

Material and labour for dismantling ceiling fan of any size from its position, dismantling blade, opening the fan motor, removing the burnt grease, applying new bearing grease, removing wornout bearing,burnt winding and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing ,heating and insulating including fixing new ball bearing/bush, hanging in its position properly complete all as specified and as directed.

Material and labour for dismantling exhaust fan of any size from its position, dismantling blade, opening the fan motor, removing the burnt grease, applying new bearing grease, removing wornout bearing,burnt winding and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing ,heating and insulating including fixing new ball bearing/bush, hanging in its position properly complete all as specified and as directed.

Material and labour for checking the ceiling fan clamps /split pin.rubber bushes ,canopy condition and replace the above items if found unserviceable to ensure safety of hanging of ceiling fans at CGRA qutrs/OTM accn complete all as specified and as directed. Note: The rate by the tenderer shall be inclusive of cost of clamps/split pin/rubber bushes/canopy etc

Supply and fix in repairs Louvers suitable for exhaust fan of 300 mm sweep with protection mesh and without shutter to avoid birds entering including taking down unserviceable louvers complete all as specified and as directed.

Supply and fix LED security light fitting 18W 5700K made up of pressure die cast housing with toughened glass with optics/diffuser IP66 protection complete including taking down unserviceable security light fittings of any type any watts and taken as credit complete all as specified and as directed Make: C&S Cat No LTESSE-18WLED or equivalent in Wipro/Philips

Supply and fix in repair Modular TV socket 6 Amps,1 module complete all as specified and as directed.Make:-ANCHOR MODEL NO:PENTA 65502/ Legrand/ABB

Supply and fix in repair Modular switch 6 Amps,single pole,two way,1 module complete all as specified and as directed.Make:-ANCHOR MODEL NO:PENTA 65002/ Legrand/ABB

Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN021C LED20S PSU CDL GR or M/S Wipro Cat Part No D532065 20W-6500K/Crompton greaves

Supply and fix LED light fitting 2 feet white, 10W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN 021 LED10S- 6500 PSU GR S1or M/S Wipro Cat Part No D531065 10W-6500K/Crompton greaves

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core ,consealed drawn into and including rigid PVC conduit of 20 mm dia ISI Marked (IS-9537 Part III) along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS PVC insulated cable 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including sunken type pressed terminal boxes MS sheet with 3mm thick plastic white cover plates with frame for various modules for mountling switches, socket, fan regulators etc complete for one light point controlled by one modular switch complete all as specified and as directed. Note: Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. Make of PVC conduit : Presto plast/Finolex/Kaling Gold

Excavating in post holes each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 CM in soft/loose soil including removal of soil to a distance not exceeding 50m and making good the surface complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including necessary formwork complete all as specified and as directed.

Fixing only chain link fencing including line wires ,any mesh ,size and type to any type of standards ,rails ,straining bolts etc including provision of binding wire complete all as specified and as directed.

Supply only chain link PVC coated GI fencing of dia 4mm ,mesh size not more than 50 mm complete all as speicfied and as directed.

Supply and fix Mild steel flat,angle etc of suitable size as in pickets brackets,post and struts in fencing including cutting top as shape as directed,drilling holes,notching forwire etc flat iron fillets (for securing chain link fencing) and including Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, n.exc 5cm long and diameter of shank 11 to 15 mm ends including all necessary drilling ,bolting, rivetting etc and similar work conforming to FE 290 Gde E-165 complete all as specified and as directed.

Material and labour for Preparation of new Steel surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed..

Material and labour for Preparation of new Steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed..

Material and labour for Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces complete all as secified and as directed.

Material and labour for Providing plain cement concrete1:3:6 type C1 using 20 mm graded stone aggregate as in bed blocks,coping,hold fast etc including necessary form work complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of wall and applying two coats of cement based paint on boundary pillars Complete all as specified and as directed.

Supply and spread Moorum/Red Bajri filling in pavings,laid in layers not exceeding 15 cm thick spread and levelled to the shape of mound and ramming including watering complete all as specified and as directed.complete all as specified and as directed.(Measurement after cosolidation)

S KUMARAN