Renovation of Toilets

Amount

Removing cement tiles, ceramic or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete as per specification & direction of E-I-C.

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead as per specification & direction of E-I-C

Demolishing cement concrete manually Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)(i/c equivalent design mix)/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge

Demolishing brick work manually/ In cement mortar by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Dismantling G.I. pipes (external work) 15 mm to 40 mm nominal bore including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead per direction of Engineer-in-charge

Removing urinal pans or wash hand basin with frame including disconnecting the sanitary & water supply connections, removing the same carefully & stacking the serviceable materials as and where directed including throwing the unserviceable material outside etc. complete as per direction of Engineer-in-charge

Removing W C Pans including disconnecting the sanitary & water supply connections, removing and breaking flooring & bed concrete around pan removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out side etc. carefuly& throwing out the refusal outside etc. complete as per specification & direction of E-I-C.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Note : The quantity loaded in the truck shall be reduced by 30% for debris, 20% for earth & Incinerator waste and 50% in case of stones / rubbles towards voids for payment purpose.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. in toilets consisting of: (i) Removing the existing cement based water proofing treatment thoroughly and expose the original concrete surface as per manufacturer’s specifications. ii)Providing two coats of High performance Elastomeric cementatious water proofing coatings (Brush bond RFX manufactured by Fosroc chemicals or equivalent approved make) as per manufacturer’s specifications. iii)Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (iv) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (v) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

vi) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). (vii) Testing the treatment for water tightness and rectification of defects if any. complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. The contractor shall furnish a guarantee bond on Rs.100/- stamp paper in the standard proforma for the entire water proofing treatment for maintaining the surroundings and underside surfaces of the water proofing treatment in bone dry condition for 10 years. During the guarantee period, the contractor shall attend all leakages, defects etc., if noticed, at free of cost.

Providing and laying in position cement concrete of 1:5:10 (1 cement : 5 coarse sand (zone-III) : 10 brick bat aggregate )grade excluding the cost of centering and shuttering - All work up to plinth level complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.

Providing and laying Cast in situ/Ready Mix cement concrete in 1:2:4 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.

Providing second class Burnt Brick (light weight) masonry with conventional /I S type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering & scaffolding etc. complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.

Providing half brick masonry Cement mortar 1:4 (1 cement :4 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in cement mortar 1:3 (1 Cement : 3coarse sand) in superstructure complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.

Providing and fixing 100 mm inlet and 75 mm outlet trap made up of Sand cast iron as per IS - 3989 of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.. Make- Nicco/ Kapilansh

Providing Laying & fixing PVC pipe of 75mm dia with fittings such as bends, tees, reducers, clamps, etc including necessary excavation, trench filling etc. Complete including removing existing pipe line if necessary & conveying & stacking the same as directed etc. complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. Make- Phenolex/Astral/Supreme

Providing Laying & fixing PVC pipe of 110mm dia with fittings such as bends, tees, reducers, clamps, etc including necessary excavation, trench filling etc. Complete including removing existing pipe line if necessary & conveying & stacking the same as directed etc. complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.. Make- Phenolex/Astral/Supreme

Providing Laying & fixing PVC pipe of 32mm dia with fittings such as bends, tees, reducers, clamps, etc including necessary excavation, trench filling etc. Complete including removing existing pipe line if necessary & conveying & stacking the same as directed etc. complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. Make- Phenolex/Astral/Supreme

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.Make- Phenolex/Astral/Supreme

Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. Make- Phenolex/Astral/Supreme

Providing and fixing water closet squatting pan (Indian type W.C.pan ) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.. Make- Hindware/Parryware/ Cera

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) W.C. pan with ISI marked white solid plastic seat and lid with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required as per specification all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge Make- Hindware/Parryware/ Cera

Providing & fixing hand shower (health faucet) with 8mm dia 1 m long flexible tube having wall hook with jaquar, parryware, hindware, cera make including necessary socket/union, flange nut etc. Complete as per specification all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.Make- Hindware/Parryware/ Cera/Jaquar

Providing and fixing following fittings and fixtures for large flat back urinal of size: 610mm x 400mm x 380mm consisting of the following items. a) Fixing of white glazed vitreous Chinaware large flat back urinal of the Hindustan Sanitary ware make with 32mm n.b C.P. brass waste b) Cutting the holes or chases in wall, floors etc., supplying and grouting wooden gutties or M.S. suitable clamps in the wall and making good the surface to its original condition, painting all the metallic parts with two coats of approved flat oil paint over a coat of primer and finishing the gap with white / matching cement etc., complete. c) Supply and fixing CP brass heavy duty approved make urinal spreader Acco make, push cock, C.P. dome grating, C.p. brass waste & PVC inlet pipe each connecting to the CPVC/G.I. pipe Line/Urinal bowl with necessary clamps/ screws. d) Supply and fixing waste coupling and PVC drain pipe for urinals. e) Installation and testing the entire assembly to the full satisfaction of the Engineer-in-charge.

Providing &Fixing 1st quality wash hand basin consisting of following items of work. a) Providing & Fixing white glazed vitreous chinaware wash basin over CI brackets which will be grouted inside the wall in concrete b) Cutting the holes or chases in wall, floors etc.,& redoing to its original condition, painting all the metallic parts with 2 coats of approved synthetic enamel paint over a coat of primer and finishing the gap with white cement etc. c) proving & Fixing 15mm dia PVC inlet connection d)Providing &fixing 15 mm n.b. screw down heavy quality C.P. brass stop cock of M/s .Jaguar make Cat no: 053 to the wash basin e) Proving & fixing CP brass pillar cock of M/s. Jaguar make cat. No: 011 f) Fixing 32mm dia C.P. bottle trap with extension piece and wall flange, waste coupling to the wash basin g) Installation and testing the entire assembly to the full satisfaction of Engineer-in-charge and rectifying the leakages etc., if any. Including making jointing leak proof and making good the surface to original type all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge

Wall mounted basin of size 550mm x 400mm, make: Parryware cat no: C0471 or euivalent make & model

Counter wash basin of size 545mm x 440mm, make: Parryware cat no: C0494 or euivalent make & model

Providing & fixing C.P Angular stop cock with wall flange of approved make continental including necessary sockets /union nuts etc. all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge Make- Hindware/Parryware/ Cera

Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. Make- Hindware/Parryware/ Cera

Providing and fixing 20 mm nominal bore ball valve (brass) of approved quality, High or low ressure, with plastic floats all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge Make-Jay/Diamond

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore as per specification all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. Make- Phenolex/Astral/Supreme

Making connection of G.I./PVC distribution branch with G.I. Main/PVC of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40mm as as per specification all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge

Providing & fixing in position factory made box type steel window with glazed fanlight including steel windows of cold rolled section of 105mm x 60mm x 1.25 thick frame section filled with cement concrete (1:2:4) and metal pressed steel shutters of 20 gauge (1mm) as per detailed drawing & design or as directed including providing horrizontal mild steel 12mm square bars at 10cm centre to centre, required F7B section, section 76, section 20mm x 5mm mild steel flat for shutter & F4B section for frame,3mm thick glass of approved quality for fanlight necessary fixtures fastening etc. complete finishing with one coat of anticorrosive paint etc. all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. Make-Jindal/Tata/Nalco

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be rovided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. Century/Sintex

An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawingall complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge Make-

Providing & laying vitrified mirror /glossy finish decorative tiles having size 1200mm x 605 mm /1000mm x1000mm of 8 to 10mm thickness & confirming IS. 15622-2006 (Group Bla) of Kajaria, Jhonson & somany make , approved shade & pattern for skirting in required position with spacers if required laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing & cleaning etc. complete as per specification & direction of E-I-C. Make- Kajaria/Jhonshon/Somany

Providing & laying vitrified matt finish tiles having size 590mm to 605mm x 605 mm of 8 to 10mm thickness or any suitable size according to size of room/ toilet & confirming IS. 15622-2006 (Group Bla) of Kajaria, Jhonson make , approved shade & pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing & cleaning etc. all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge.Make- Kajaria/Jhonshon or any other approved make

Providing & fixing machine cut mirror polished 18mm to 20mm thick telephonic black/Amba white /Cat bary brown/RBI red/ Ocean Brown granite stone partition /chaukhatswith rounding & moulding the edes complete. Both side polish all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge

Providing and fixing C.P. Brass toilet paper holder all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge Make- Hindware/Parryware/Cera

Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge

Providing & fixing cast iron centrifuguly spurn soil/vent/waste pipe of 100mm diameter as per IS 1729/ 2002 with necessary fixtures & fitting such as bends tees single junction double junction slotted vent offsets on walls or in the ground including filling joints with read lead oil paint coat & two coats of anti corrosive paint including fixing the pipe on walls by means of nails driven through lugs in wooden holder / battens & supported on ground floor by C C 1:2:4 of 30 cm x 30cm size block all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge. Make-Nicco/Kapilansh

Providing & fixing cast iron centrifuguly spurn soil/vent/waste pipe of 1729/ 2002 75mm diameter with necessary fixtures & fitting such as bends tees single junction double junction slotted vent offsets on walls or in the ground including filling joints with read lead oil paint coat & two coats of anti corrosive paint including fixing the pipe on walls by means of nails driven through lugs in wooden holder / battens & supported on ground floor by C C 1:2:4 of 30 cm x 30cm size block all complete with cost of materials, labour, tools & plants all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge Make- Nicco/Kapilansh

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete, brick surface in all position including scaffolding & curing etc. all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge

Providing & applying Royale emulsion of Asian/ Berger/Nerolac/ Dulex Paints make on internal wall surface as detailed below scrapping for surface with enemy paper & wipe clean for area. Applying Asian/Berger / Nerolac/ Dulex paints wall primer with brush by adding mineral turpentine oil by 8 to 10% or water by 15% to 20% allowing to dry for 6 to 8 hours. After applying Asian/Berger/Nerolac/Dulex Paints or equivalent acrylic wall putty with appropriate proportion of water of allow to dry for period of 4 to 6 hours of activity.Scrapping with enemy paper & wipe clean . Applying paints Royale Luxury emulsion 1st coat with brush .water content water 40 To 45% or 65 to 70% by roll applying paints. Royale luxury emulsion 2nd coat with brush water content 40 To 45% or 65 to 70% by roller all complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge

Polishing in three or more coats of french polish over the existing polished pelmets, door shutters etc including cleaning the dirt, dust, grease, oil markings, stains etc at all floors heights and locations and sand papering, filling up cracks and crevices with approved compound, all complete with cost of materials labour, tools plants, scaffolding etc all as per specifications and direction of Engineer-in-charge.

Providing & appllying one or more coats of synthetic enamel paint of approved colour to new/old structural steel work& wood work in buildings, including scaffolding if necessary, cleaning & preparing the surface(excluding primer coat) etc. all complete with cost of materials labour, tools plants, scaffolding etc all as per specifications and direction of Engineer-in-charge. . Make- ASian/Nerolac/Dulux

Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers all complete with cost of materials labour, tools plants, scaffolding etc all as per specifications and direction of Engineer-in-charge. . Make- Saint gobain

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 gradedcoarse sand with polymer minimum 2% by wt. of cement used) all complete with cost of materials labour, tools plants, scaffolding etc all as per specifications and direction of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been under this item shall be made only after proper wet curing has been done

25 mm average thickness in 2 layers.

Grouting the leaky surfaces of the R.C.C. structural members using cement slurry mixed with non shrink grout material of M/s Fosroc or approved make including making holes and placing Nozzles / PVC pipes, with quick setting cement and injecting cement slurry using grouting machine at required pressure complete with cost of materials, labour, tools and plants scaffolding all complete with cost of materials labour, tools plants, scaffolding etc all as per specifications and direction of Engineer-in-charge.

General Notes: 1. Contractor shall inspect the site to acquaint with the site conditions as well as security conditions at AMD Complex, Civil Lines, Nagpur 2. All the items of work mentioned below shall have to be done on internal and external wall areas, terraces and at all floors, heights and locations of AMD Complex, Civil Lines, Nagpur( with in a lead of 150.0 mtrs. and lift of 25.0mtrs) 3. All the tolets are in operation and in use by officersand staff of AMD. Therefore, contractor has to execute the work as per the convenient timings of users and with least/no disturbance to the residents. 4. All the dismantled/ demolished materials shall be dumped at one place as decided by the department within the lead of 150.0mtr. and all the dismantled/ construction materials & tools shall be carried through staircase only. In any case lift shall not be permitted to be used by the contractor’s people during the execution of work. 5. All the samples of materials which are to incorporated in the work shall be got approved by the Engineer -In- charge well in advance. All mandatory tests (As per Appendex-B) for materials shall be carried out/done by the contractor at his cost only. Department will not pay/ reimburse any laboratory testing charges. 6. It is the responsibility of the contractor to handover the dismantled items to Dept. At site. Contractor shall be held responsible for any shortage/ missing of dismantled items untill handing over the same to dept.stroes

7. The contractor is required to pay his employees / labour as per the prevailing minimum wages approved by State/ Central Govt. The Officer In –Charge or his representative will witness the payment of contractor’s labour and is required to certify that the contractor does not pay less than the minimum wages approved. Payment to the contractor will be released only on such certification from Officer In –Charge. The contractor shall maintain 1. Register of Workmen employed 2. Muster roll 3. Register of wages etc. 8. Contractor shall quote rates for all items after considering cost of materials and labour components and all such conditions leads, lifts, safety precautions, security restrictions that are necessary for satisfactory completion of work as per instructions and site conditions. Security regulations shall be followed 9. The rates quoted shall include cost of all tools and tackles, manpower including wages, liveries, all wastages and GST,water charges,Labour cess seignorage charges etc. as applicable but exclusive of EPF and ESI. EPF and ESI are reimbursable as per relevant clause on production of proof of payment as per CPWD norms. 10.The contractor has to follow all safety rules of the department and all safety equipments, PPE shall be provided to all workers engaged by him. Only skilled workers have to be deployed for work on heights wherever and whenever required. Insurance to workers shall be done and should be valid during entire period of contract. 11. The contractor shall use only river sand confirming to IS 383 for all cement works involved in the scope of work. 12. Recommended/Preferred Manufacturer for factory made building materials are given in Appendix-A

M N DHANOLE ENTERPRISES

Mangla And Mangla Construction