Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST TENDERER | |
| 2 | L2₹11.8 L+₹3,270 (0.28%)Rejected-AOC PLOT NO 42 SURAJ NAGAR MANKAPUR RING ROAD NAGPUR 440013 | NAGPUR | NAGPUR | MAHARASHTRA | 440013 | L2 | Rejected-AOC NOT LOWEST TENDERER | |
| 3 | L3₹12.2 L+₹38,475 (3.26%)Rejected-AOC MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L3 | Rejected-AOC NOT LOWEST TENDERER |
Tender Value
₹14.9 L
EMD Value
₹30,000
Closing Date
9 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL SANDEEP BENIWAL, GE
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR MAINT OF EM INSTALLATIONS INLUDING BR WORKS AT VAYUSENA NAGAR, NAGPUR
2024_MES_641854_1
8662
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹30,000
30 Mar 2024
10 Feb 2024
16 Mar 2024
10 Feb 2024
9 Mar 2024
24 Feb 2024
Amount
Demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars etc. complete all as specified as specified and directed
Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified as specified and directed
Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing and removing rubbish off the premises complete all as specified as specified and directed
Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. Over 15 mm thick screed bed in CM 1:6, including set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface.
Material and labour for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick including set and jointed in neat cement slurry and pointed in white or colour cement to match including Cement plaster of CM 1:3 on concrete or brick surfaces complete all as specified
All as per item No 4 above but area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm
Supply and fixing chequered coloured cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in cement slurry in floors with cement pigment incl and over 15mm thick screed bed or bedding layer of CM 1:6 set and jointed in neat cement slurry and pointed in grey cement or colored pigment to match the surface of tiles finish complete all as specified.
Material and labourf or screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes complete all as specified and as directed.
Material and labourfor machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing omplete all as specified and as directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in equired colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand edding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including taking out old concrete paver blocks, sand cushioning and remove from side, complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening and necessary excavation wherever required complete. Note:- size and shape of kerb stone shall be approved by GE/EIC before execution
Demolition of cement concrete (unreiforced) of any description and in any position not otherwise specifically provided for all as spd.
Material and labour for cement concrete D-2, (1:4:8) (using 40mm graded crushed stone aggregate), as below the paver block, tiles footpath complete all as specified and directed.
Material and labourcement concrete type C-2 (1:3:6) as below the paver block, tiles footpath complete all as specified and directed.
Taking down cement or cement lime plaster of any description from brick or stone wall etc incl racking out of joints , hacking for key any scrubing down with water etc complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) surface finished fair and even complete all as specified and directed.
Material and labour for rendering 10 mm thick on fair face of brick work or concrete surface in CM 1:6 , finishing surface fair and even complete all as specified and directed.
Material and labour preparation of newly plastered or unplastered surfaces and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.
Material and labour preparation of newly plastered surfaces & providing two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.
Material and labour for preparation old decorated plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed.
Material and labour for preparation of old decorated plastered wall surface applying one coat of oil bound distemper on wall all as specified and directed.
All as per item No 22 above but two coats of oil bound distemper on wall all as specified and directed.
Material and labour for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete.
Material and labour for preparation of old treated wooden surfaces of any description, not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for application of one coat of exterior emulsion paint of white or AF blue colour or equivalent colour as approved as GE, using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints/ Nerolac over the old decorated wall surfaces, edges of slab, roof/chajja projection and column etc. including filling the holes and broken surfaces with waterproof putty up to height 30 mtr, after necessary preparation all as specified and as directed.
Material and labour for application of one coat of exterior emulsion paint by roller blue or AF blue colour or equivalent colour as approved by GE using ultra clean paint of Dulux ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints/ Nerolac over the old decorated wall surfaces (projections of column/wall/edges and other narrow location of RCC overhead tank surfaces including staging from 7.50 M upto 18 m height) after necessary preparation as specified and as directed. NOTE: Provn of all safety instruments/scafolding/material & saefty of workers, insurance etc are contractor's responsibility
Material and labour for application of one coat of exterior emulsion paint by roller blue or AF blue colour or equivalent colour as approved by GE using ultra clean paint of Dulux ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints/ Nerolac over the old decorated wall surfaces (projections of column/wall/edges and other narrow location of RCC overhead tank surfaces staging above 18 m height) after necessary preparation as specified and as directed) NOTE: Provn of all safety instruments/scafolding/material & saefty of workers, insurance etc are contractor's responsibility
Material and labour for dampness rectification on Wall Area :- Surface Preparation: Removing existing putty/ plaster/ POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level. Coating: Applying two coats of Dr Fixit Pidifin 2k/ Equivalent in SIKA / STP (a two component, anti-fungal, acrylic waterproofing coating) over cleaned surface with brush and allowing it to dry for 24 hours Finishing the surface: Applying plaster 15 mm thick in CM 1:4 over the treated surface with waterproofing compound to provide proper finish proper curing of plastered surfaces, preparation of plastered surfaces and applying 2 coat of cement base paint over a coat of primer all as specified and as directed.
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc. 1 Sqm and n.exc 2.00 Sqm each all as specified and as directed.
Supply and fixing 30 mm thick flush shutter solid core construction with partical board core and plywood face panels commercial type on both sides complete all as specified and directed
Material and labour for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Supply and fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS Square tube including taking down existing PVC door frame with shutter complete all as specified and directed
Supply and fixing factory made Solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
Material and labour for anodised aluminium frame with powder coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (due to existing available on site).
Material and labour for anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified With powder coating (minimum thickness of powder coating 50 micron) complete all as specified and as directed. Note: Glazing shall be measured and paid separetl
Material and labour for powder coating of any colour (thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, fixed type / sliding type, Two/three track without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed .
Supply and fixing aluminium alloy, anodised, sliding door bolt with hasp 250mm long, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed .
Supply and fixing in anodised aluminium barrel tower bolt 100 mm long complete all as specified and as directed .
Supply and fixing 100 mm long aluminium handle cast type complete all as specified and directed
Supply and fixing floor door stopper 140 mm long of aluminiumm alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.
Supply and fixing in repair 0.36 mm dia stainless steel wire gauge and average width of apreture 1.4 mm with stainless steel wire staples complete all as specified and as directed.
Hacking out old broken glass (any thcikness size, quality or descritpion) from wooden frame or steel frame glazed with putty or fixed with beads complete all as specified and as directed.
Supply and fixing 3mm thick sheet glass, ordinary quality in square nexc 0.50 sqm each pane glazed with oil putty or fixed with wooden beads complete all as specified and as directed.
Dismantling of corrugated AC/fibre/GI sheet any pattern in roof incl ridge complete all as specified and as directed.
Material and labour for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.
Material and labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410 W(Gde E-250) quality 'B' complete all as specified and as directed.
Supply and fixing in repsir mild steel, plain, black sheet 1.6mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.
Material and labour for preparation of new or previously unpainted steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.
Maintenance of rolling shutters of any size upto 5.5 m wide with easioning, greasing, necessary welding to make the shutters full functional and easy operational including minor spares and materials costing upto Rs. 200/- as required and painting with synthetic enamal pain all as specified and as directed. Note Safety lever lock/ ball bearing and other major spares if required will be replaced and paid separately.
Material and labour for preparation of old treated surfaces of any description and aplying one coat of aluminium paint on shutters or any surfaces , over 10cm in width or girth,not otherwise described complete all as specified and directed.
Supply and fixing in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
Supply and fixing in repairs ball bearing for rolling shutters and fixed at place complete all as specified and directed.
Dismantling fencing wire mesh, any type complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken ubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 mtr complete all as specified and as directed.
Material and labour for plain cement concrete type B2 1:2:4 (using 40mm graded stone aggregate) in foundations,filling and mass concrete complete all as specified and as directed.
Material and labour for mild steel angles, bars, flats etc as in support for stiffenning of fencing, wall ties, hold fasts, clamps plain angle cleats for securing purlin and similar small articles confirming to Fe 410-O or Fe 310- O complete all as specified and as directed.
Supply and fixing mild steel screw bolt (machine made) 11 to 15 mm dia of shank with hexagonal or squre head at one end and scred to other , or screwed both ends each screwed end fitted with washers and one hexagonal or squre nut, exc 5 cm long complete all as specified and as directed.
Supply only chain-link MS galvanised fencing any size / type complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete.
Supply and fixing mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in chain link fencing confirming to Fe 410-W(gde E-250) quality-A or Fe 290 (Gde-E-165) complete all as specified and as directed.
Supply and fixing in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Dua Construction
M/s Prakash R. Verma
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .