WIDENING AND STRENTHNING OF PINDRA KATHIRAON (ODR) ROAD

Amount

Excavation in soil for making trenches for widening of road using hydraulic excavator C.K. 90 and tipper with disposal upto 1000 m :- Excavation for road work in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading tipper triming bottom and side slop in accordance with requirement of lime, grade and cross section and transporting of the embankment loctiong within all lift and lead. as per MoRTH specification No. 301. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Construction of Embankment with Material Deposited from Roadway Cutting with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Construction of embankment with excavated quantity of earth from road way, spreading, grading to required slope and compacted to meet requirement (table no. 300-2) as per MORTH specification clause 305 (compaction only) (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Construction of granular sub-base (In widening) by providing close graded material, spreading in uniform layers (In two layers) with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all lifts and leads upto 1000 metres. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base (In widening) including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Technical Specification Clause 502. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Providing and laying 75mm thick dense graded bituminous macadam (Grade-1) with 100-120 TPH batch type HMP producing an average output of 58 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0% by weight of total mix and filler, transporting the hot mix kto work site, laying with a hydrostatic paver finisher with sencor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specifications Clause 507 complete in all respects. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Providing and applying tack coat with bulk bitumen VG-10 using bitumen pressure distributor @ 0.35 kg per sqm on the prepared surface cleaned by mechanical broom. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Providing and laying 30mm thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.40 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specifications Clause 509 complete in all respects. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Construction of subgrade and earthen shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement to Table 300-2 (without lead). (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete. (For RCC drain & 1000mm HP Culvert) (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Concrete with 4cm. gauge approved stone ballast, approved coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. (For RCC drain & 1000mm HP Culvert) (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:2:4 in U-Drain, excluding its fixing and binding the same with 24B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. (For RCC drain). (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Supply fitting and placing HYSD Bar reinforcement in super structure complete as per drawing and technical specifications. (For RCC drain) (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

M-150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. (For 1000mm HP Culvert) (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (For 1000mm HP Culvert) (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)

M/S SANJAY CONSTRUCTION