Raising and Extension of Rail Level Platform No. 1,2,3,4 to High Level Platform at ABO on DLI-BTI section in the Section of SSE/W/ROK Under ADEN/ROK

Item Breakup - A-Schedule A DSR -2021

pattern. 17.0 SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan Each 5 5781.35 28906.75 50 of size 580x440 mm with integral type foot rests Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing 17.4 cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.4 Range of four urinal basins with 10 litre white Each 5 15564.35 77821.75 51 P.V.C. automatic flushing cistern 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES DELHI DIVISION-ENGG/NORTHERN RLY Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making 18.10 good the walls etc.-Internal work - Exposed on wall 52 18.10.2 20 mm dia nominal bore Metre 250 373.35 93337.5 53 18.10.3 25 mm dia nominal bore Metre 250 491.2 122800 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc.-External work 54 18.12.5 40 mm dia nominal bore Metre 500 558.35 279175 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 55 18.13.1 25 to 40 mm nominal bore Each 20 757.1 15142 56 18.13.2 50 to 80 mm nominal bore Each 20 1513.7 30274 19.0 DRAINAGE Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 19.4 with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 57 19.6.4 300 mm dia. R.C.C. pipe Metre 200 902.05 180410 Total 22271506.07

Item Breakup - B-NS items

Rebate for dismantling of existingabandoned Sqm structure having jackarch roofing RCC/AC sheetroofing, existing cabin, duty hutand removing debries anotherreleaseds materials afterdismantling out side Rly. Land. Allreleased materials such as doors,windows, steeel grills, girders willbe the property of contractors.Contractors will quote the rate forpayment to the railway on plintharea basis. The rate includes all L& M, loading, Unloading, handling,and rehandling etc. So as to clearrailway premises of all materialsand debries. A survey report ofabondoned structure to besubmitted along with work order.The cost of abondoned structureto be depositted in the acount of Railway. DELHI DIVISION-ENGG/NORTHERN RLY

"Design, Manufacture, Supply & Installation of RM factory-made (wet cast) Precast Divyangjan friendly Railway Platform Coping Stone based on Northern Railway N.R.H.Q.E(P) Plan No. P- 209-MS/2014/R1, manufactured by M/s Fujisilvertech, Sidhi Vinayak, Suruchi Precast Limited, FIT/Aurangabad or equivalent. Precast segments shall consist of high strength reinforced cement concrete duly steam cured in a controlled environment and manufactured by using high performance self-compacting concrete of M- 50 grade with minimum Cement content of 450Kg/Cum. Cement shall be of Gr. 53 as per IS: 12269 and TMT steel reinforcement bar of Grade Fe-500D as per IS : 1786. Length of each Panel shall be 0.90m. Minimum reinforcement content in Coping Stone shall be 6.08 Kg. Concrete shall be cast in leakproof steel moulds maintaining precise product dimensions. The tolerances on the shapes, lines and dimensions shown in the drawing shall be within the limits given below: a) Deviation from specified dimensions of cross-section - ±2mm b) Deviation from specified dimensions of length & Height of segment- ±5mm The precast segment shall consist of special in-built inserts at appropriate location for safer and faster installation. Joint shall be filled up with factory made non-shrink grout material of approved make. Precast Factory shall have in-house NABL approved testing facility for quality checks and shall have ISO 9001, ISO 14001 and ISO 45001 certification for design, manufacture and dispatch of products and shall be ZED certified. Precast Factory shall invariably have state of art RMC plant, dedicated RO water plant and Steam curing Units of sufficient capacity. The precast manufacturer shall have proven record of minimum 3 years of work experience in production & supply of precast products in Government / PSU projects. The rate is applicable for Delhi Division and is inclusive of all loading at Factory, leading, unloading. handling, rehandling, GST @ 18%, installation, jointing, curing etc. The rate is exclusive of earthwork in excavation, dewatering, PCC (1:3:6) & leading surplus earth outside Railway boundary, which shall be paid under relevant DSR Items." DELHI DIVISION-ENGG/NORTHERN RLY

"Design, Manufacture, Supply & Installation of RM factory-made (wet cast) Precast Railway Platform Wall (Panel, P-1) segments based on Northern Railway N.R.H.Q.E(P) Plan No. P-209- MS/2014/R1, manufactured by M/s Fujisilvertech, Sidhi Vinayak, Suruchi Precast Limited, FIT/Aurangabad or equivalent. Precast segments shall consist of high strength reinforced cement concrete duly steam cured in a controlled environment and manufactured by using high performance self-compacting concrete of M- 50 grade with minimum Cement content of 450Kg/Cum. Cement shall be of Gr. 53 as per IS: 12269 and TMT steel reinforcement bar of Grade Fe-500D as per IS : 1786. Length of each Panel shall be 0.90m. Minimum reinforcement content for Panel-1 shall be 20.80 Kg, Concrete shall be cast in leakproof steel moulds maintaining precise product dimensions. The tolerances on the shapes, lines and dimensions shown in the drawing shall be within the limits given below: a) Deviation from specified dimensions of cross-section - ±2mm b) Deviation from specified dimensions of length & Height of segment- ±5mm The precast segment shall consist of special in-built inserts at appropriate location for safer and faster installation. Joint shall be filled up with factory made non-shrink grout material of approved make. Precast Factory shall have in-house NABL approved testing facility for quality checks and shall have ISO 9001, ISO 14001 and ISO 45001 certification for design, manufacture and dispatch of products and shall be ZED certified. Precast Factory shall invariably have state of art RMC plant, dedicated RO water plant and Steam curing Units of sufficient capacity. The precast manufacturer shall have proven record of minimum 3 years of work experience in production & supply of precast products in Government / PSU projects. The rate is applicable for Delhi Division and is inclusive of all loading at Factory, leading, unloading. handling, rehandling, GST @ 18%, installation, bedding mortar, jointing, curing e t c . The rate is exclusive of earthwork in excavation, dewatering, PCC (1:3:6) & leading surplus earth outside Railway boundary, which shall be paid under relevant DSR Items." Total 36723246.85