REPAIR / MAINTENANCE VIP AND GENERAL GUEST ROOMS ON 1ST FLOOR LEFT SIDE AND GENERAL GUEST ROOMS ON 1ST FLOOR RIGHT SIDE OF RTC HOSTEL BLDG UNDER GE E/M LUCKNOW

Amount

Demolition of cement concrete in ground floor and paving not exc 15cm thickness below or above ground level, including removal of debris complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles all as directed.

M&L for 25 mm thick plan cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in levelling course complete.

M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge.

M&L for half brick thick wall with Fly ash brick designation 100 Kg / Sqcm using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, straight or curved of on plan to any radius built in CM 1:4 complete all as specified.

Removing of debris obtain from demolition of PCC, brick work & similar work to a distance exc 250 metre but not exc 500 metre and depositing where directed at a level n.exc.1.5 Mtr above the starting point.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debris out side MD land all specified and directed.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement.

M&L for complete removal of existing treatment of old surface of walls including brooming down / steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and grease spouts and cleaning with water on wall complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of old surface of ceiling including brooming down / steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and grease spouts and cleaning with water on wall complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of surface of walls and applying two coat of Plastic emulsion paint over one coat primer over and including 2 mm thick cement base wall care putty complete all as specified and directed by Engineer-in-charge. Note :- Plastic emulsion paint and primer to be applied with roller only.

M&L preparation of surface of ceiling and applying two coat of Plastic emulsion paint over one coat primer over and including 2 mm thick cement base wall care putty complete all as specified and directed by Engineer-in-charge. Note :- Plastic emulsion paint and primer to be applied with roller only.

M&L for Providing and applying plaster of paris finish on ceiling surface and including making design as approved, and moulding design at junction of wall & ceiling and prepare the surface even and smooth complete all as specified and directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris from site.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 900 x 450 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of backing coat.

M&L for non skid ceramic tiles 7-8 mm thick (square or rectangular) polished area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed in CM 1:4 complete all as specified and directed by Engineer-in-Charge Note : Quoted rate shall be deemed to include cast of screed bed.

M&L for double charge, dark shade colour vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles exc 0.42 Sqm but n.exc 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the tiles over and including 15 mm thick scree bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of screed bed.

All as per above item No. 18 above but fixing of tiles as in on vertical surfaces over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. Note : Quoted rate shall be deemed to include cast of backing coat.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including half round moulding of exposed edge, laid over and including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and directed. Note : Quoted rate shall be deemed to include cast of screed bed.

S&F in repair PVC connection 15 mm size with PTMT nut, length 450 mm complete.

S&F in repair 15 mm size Bib Cock with wall flange, fancy type, chromium plated, cast copper alloy, complete all as specified and as directed. Make Jaquar Cat Part No OPP-15037PM or equivalent cat No of make mention under list of make.

S&F in repairs 15 mm size concealed type stop cock, fancy type with cast copper alloy chromium plated, lever operated screwed both ends complete all as specified and directed. Make:- Jaquar Cat Part No OPP-15083KPM & ALD-083 or equivalent cat No of make mention under list of make.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 / 25 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

S&F 25 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

S&F in repairs mild steel chromium plated gratings with waste hole suitable for 75 / 100 mm dia for NT/ FT complete all as specified.

S&F in repairs 15 mm size 2 way bib cock with flange fancy type, chromium plated, cast copper alloy, complete all as specified and as directed. Make- Jaquar cat part OPP-15041PM or equivalent cat No of make mention under list of make.

S & F in repair white vitreous china floor mounted coupled EWC of size 375 mm x 650 mm x 800 mm, including UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories, accessories set complete all as specified and directed. Make:- Jaquar cat part ARS-WHT-39751P180UFSMZ or equivalent cat No of make mention under list of make.

S&F in repair white vitreous china table top wash hand basin of size 500 x 425 x 130 mm including CP waste coupling, bottle trap complete all as per manufacturer's instruction. Make-:-Jaquar cat Part No FLS-WHT-5935 or equivalent cat No of make mention under list of make.

S&F in repair ABS plastic chromium plated Health faucet fixed with spring action and lever along with Flexible hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge. Make Jaquar Cat part No ALD-577 or equivalent cat No of make mention under list of make.

S&F in repairs stainless steel towel rail of superior quality 60 cm long, fancy type all as specified. Make Jaquar cat part No AKP-35711PS or equivalent cat No of make mention under list of make.

S&F stainless steel towel ring round flange, superior quality fixed as in repair all as approved. Make Jaquar Cat Part ACN-1121BN or equivalent cat No of make mention under list of make

S&F stainless steel toilet roll holder with flap, fancy type all as specified. Make:- Jaquar cat part No AKP-35753PS or equivalent cat No of make mention under list of make

S&F in repairs 15 mm size single lever basin mixer without Popup waste with 450 mm Long braided hoses, cast copper alloy chromium plated, with screwed in counter top basin, fixed in position complete. Make:- Jaquar cat part No OPP-15011BPM or equivalent cat No of make mention under list of make

S&F 15mm size single lever wall mixer with provision of hand shower, cast copper alloy chromium plated, for mixing hot & cold water with hand shower complete all as specified and directed. Make-Jaquar Cat No LYR-38119 & Cat No HSH-1717 or equivalent cat No of make mention under list of make.

S&F 32 mm dia of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.

S&F in repairs for 15 mm size angle cock fancy type, cast copper alloy chromium plated, and fixed, all as specified. Make-Jaquar Cat No OPP-15053PM or equivalent cat No of make mention under list of make.

S&F chromium plated shop dish fancy type fixed on wall surfaces all as specified and directed. Make - Jaquar cat No ACN-1131N or equivalent cat No of make mention under list of make.

S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250 x 250 mm, fixed with CP brackets, complete, all as specified and directed. Make: Jaquar cat part No ACN-1173 or equivalent cat No of make mention under list of make.

Supply & fix sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide x 600 mm long with chromium plated bracket guard and railing complete. Make: Jaquar Cat part No ACN-1171N or equivalent cat No of make mention under list of make.

S&F 18 / 19 mm thick Block boards, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame-work as in built in furniture etc complete all as specified and directed.

S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

Taking down Chowkhat or frame with shutter (wooden / steel / aluminium) (without taking off shutter from the frame) area n.exc 1.5 Sqm each, complete all as specified and directed

Taking down chowkhat or frame with shutter (wooden / steel / aluminium) (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed

S&F 1st class hard wood plain, solid chowkhat and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pined at joints all as specified and directed at site

M&L for 35 mm thick 1st class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels. Commercial type on both sides incl 4.00 mm thick MDF board on both sides of flush shutter with adhesive and necessary fixtures including 0.9 mm thick decorative laminate type B-1 both of surface finish, colour and pattern approved, fixed with approved adhesive, all as specified and directed by Engr-in-charge.

S&F in repair Aluminium (Extruded Section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in position complete.

S&F in repair 100 mm size brass body mortice lock, with 2 brass levers and duplicate key complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new wooden surface of any description and applying two coat of melamine wood polish on over sealer / filler coat to have smooth and glossy finish surface to the entire satisfaction of GE.

S&F stainless steel soft close auto hinges of size 75 mm x 50 mm x 25 mm complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanized., width of flaps when open in 30 mm, complete all as specified and directed by Engineer-in-Charge.

S&F 125 mm butt hinges extruded brass with mild steel hinge pin, bright polished and fixed, type B - 11 all as specified.

S&F brass handle, extruded, fabricated type polished 150 mm long complete.

S&F brass sliding door bolt 300 mm long with sand or die-cast brass hasp & staple (bolt type) and fixing bolts and sliding bolt with rolled or drawn brass bolt .

S&F 200 mm long brass barrel tower bolts with barrel of extruded section.

S&F providing and fixing factory made UPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3 mm (+ 0.2 mm). Window profile with hallow section with multi chamber. Frame (88 mm x 52mm) sliding sash (42 mm x67 mm). sliding mesh sash (42 mm x 57 mm) sliding interlock (one vertical length in each shutters) (45.5 mm x28mm), Glazing bead (24.5 mm x 16 mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware. EPDM gasket1.2+- 0.2 mm thick galvanise steel frame 30 mm x18 mm) 2 Nos, sliding sash (30mmx18 mm), sliding mess sash (26 mm x10 mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x100 mm long fasteners (Hardware : Touch Lock of zinc alloyed (white powder coated) steel roller system. stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and required accessories. area exceeding 2.00 sq.m each

Supply and Fix sheet glass 5.5 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Taking down PVC pipes (any size) including all fittings

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors including clamp complete all as specified and as directed

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors including clamp complete all as specified and as directed

S&F 75 mm size PVC (SWR) junction single (single Tee) equal or unequal with access door fixed to pipe complete.

S&F 110 mm size PVC (SWR) junction single (single Tee) equal or unequal with access door fixed to pipe complete.

S&F PVC (SWR) plain bend 110 mm dia, of any radius with rubber ring joints, complete all as specified and as directed

S&F in repairs PVC floor trap size 75 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed .

S&F in repair 25 mm dia Curtain rod, heavy duty, stainless steel, fixed cut to size and fixed in position, complete all as specified and directed.

S&F in stainless steel "Finials" (end cap) of approved finish with stainless steel bracket suitable for curtain rod of 25 mm complete.

Material and labour grinding and polishing of existing of Kota stone / terrazzo tiles flooring polished up to mirror finish including applying bees wax polish by machine complete all as specified & directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.

Material & Labour for concealed point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including rigid non metalic PVC conduit and conduit accesseries fixed concealed in walls / ceiling, including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable of green colour as a earth wire connected to common earth dolly, etc including pressed steel sunken type terminal box up to 8 module suitable for modular switch complete. Note:- Modular type switch, cover plate & frame will be measured & paid separately

All as per Item No 75 above but for one call bell point controlled by one, one way bell push on independent board.

All as per Item No 75 above but for one 5 Amp socket outlet point on the same board with other switch controlled.

All as per Item No 75 above but for one 5 Amp socket outlet point controlled by one, one way switch on independent board.

All as per Item No 75 above but for one 6 pin 15 / 16 amps socket outlet point controlled by one, one way switch on independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 sqmm.

S&F modular type one way switch, 6 Amp 240 volt in one moduel including connecting complete as specified and directed.

S&F modular type 6 Amp 5 pin universal socket in two moduel , 240 volts including connecting complete all as specified and directed.

S&F modular type one way switch, 16 Amp 240 volt in one moduel including connecting complete as specified and directed.

S&F modular type 6 / 16 Amp 5 pin universal socket in two moduel , 240 volts including connecting complete all as specified and directed.

S&F modular type one way bell push, 6 Amp 240 volt in two moduel including connecting complete as specified and directed.

S&F ceiling rose polycarbonate body surface type three terminal complete as directed.

S&F Modular white cover plate with frame 2 module.

S&F Modular white cover plate with frame 3 module.

S&F Modular white cover plate with frame 6 module

S&F Modular white cover plate with frame 8 module

Supply & fix modular fan regulator 100 / 100 W, in 2 Module for ceiling fan and connecting as directed.

S&F modular type sheet enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps.

S&F in replacement call bell AC single pole 240 volt ding dongType.

S&F in replacement of double door VTPN 4 way Distribution box suitable for & including 4 pole MCCB 125A, 415 V 01 No as incoming & MCB SP 32 Amps 04 Nos, MCB SP 63 amps 08 Nos as outgoing, 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc including necessary civil works and electrical connections with suitable lugs / spreader links complete all as specified and directed by Engr-in-charge. Note: Quoted rates shall be deem to include cost of MCCB & MCB,s

S&F in repair distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 12 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, fixed flush to wall complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

Material & Labour for concealed sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including heavy duty rigid PVC conduit not less than 20 mm dia with all necessary fitting, fixed concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling, and including one run single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire in green colour, complete. Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment.

Material & Labour for concealed sub main wiring with 2 run single core multistranded copper conductor cable, of size 10.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including heavy duty rigid PVC conduit not less than 20 mm dia with all necessary fitting, fixed concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling, and including one run single core multistranded copper conductor cable, of size 10.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire in green colour, complete. Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment.

Supply and fix wall / surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens / watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA / PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Make:- Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR / SI / Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH / Bajaj LED batten BCLAB 20W WH LED P

Supply and fix wall / surface mounting luminaires (Mirror Light) integrated LED Batten ( 2 feet) 10 / 12 W, 6500 K, 230V ,100 lumens / watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Make: Phillips smart brite cat no BN 021 LED 12S 6500 / 4000 PSU GR/SI / Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH / HPL Neptune plus 10 w HLPT51510CW

S&F in repairs of surface type round LED 12 W downlighter all as per specified and directed. Make: Havells Integra neo (surface) cat part no: IntegraneosurfaceDLS15WLED840S / Phillips sleek surface SM250 & SM251 (Circular) / Bajaj sleek surface LED cat no. BGSLO SLEEK SURFACE 12W WH RD

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square / round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make:- Phillips Model Grace or Jaquar lighting cat no JNL-NKL-WLBPGG001E27 / Havells decorative model Floretine WL 1LS B22 SS cat no LHFOAJE1TZ1I060 Note: Rates including 01X 7 / 9 W LED Bulb with each fitting.

S&F ceiling fan 1200 mm sweep, BEE 5 star rated, BLDC motor, AC single phase, 230 / 240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50 sqmm from ceiling rose to fan complete all as specified and directed.

Supply and fix storage type water heater 25 ltrs capacity, 5 Star rated, vertical mounting type, made out of CRCA outer body, copper storage tank, heating element, thermostat, thermal cut out, glass wool insulation etc. including making necessary electrical connections with suitable size copper multistranded cable and connecting to water supply complete all as directed by EIC.

Supply and fix heavy duty metal body exhaust fan single phase 230 / 240 volt of size 300 mm sweep including making holes of suitable size in walls, grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076 mm, complete all as specified and directed.

Supply and fix exhaust / fresh air fan 250 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complate all as specified and as directed.

Disconnecting of ceiling fans / exhaust fan of any size from ceiling rose / connector for cleaning,servicing / oiling and greasing of fan by using appropriate grade of oil / grease and replacing defective parts such as bush bearing, split pin rubber bush, capacitor etc and rehanging the same after proper cleaning and making connection with ceiling fan / connector with flexible wire of size 23/0076 copper conductor multi stranded as directed by Engr-in-Charge.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .

Dismantling of indoor / out door unit of split type A/Cs of 1.5 / 2.0 TR capacity from their original locations and shifting it to other locations including servicing / overhauling of indoor / out door units, top up of refrigerant gas as required quantity and refixing it to locations where directed and making necessory electrical connection / connecting copper tubing of suction / discharge line and testing it upto entire satisfaction of Engineer-in-charge.

M/S Reliance Construction (BID ID -3093011)

M/S KAUSHIK CONSTRUCTION (BID ID -3070766)

rajan construction (BID ID -3093056)

MAA BHAWANI CONSTRUCTION (BID ID -3069750)

M/S VISHAL ENGINEERS (BID ID -3068717)

M R CONSTRUCTION (BID ID -3092753)

M K Engineers and Contractors (BID ID -3071061)