Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80.2 LAccepted-AOC 5 A LANE 1 GREATER KAILASH JAMMU J K 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹83.5 L+₹3.3 L (4.08%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹83.8 L+₹3.6 L (4.53%)Rejected-Finance PLOT NO 52 BAKSHI NAGAR JAMMU 180001 J K | JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹86.7 L+₹6.5 L (8.08%)Rejected-Finance 96 SHASTRI NAGAR SHASTRI NAGAR JAMMU JAMMU KASHMIR 180004 | JAMMU | JAMMU AND KASHMIR | 180004 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹96.6 L+₹16.4 L (20.5%)Rejected-Finance H NO 352 SECTOR 1 CHANNI HIMMAT JAMMU J K 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
7 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col S Pradeep, CWE
Military Engineer Service, HQ Commander Works Eng
TENDER FOR COMPREHENSIVE B/R AND E/M REPAIRS TO CERTAIN OTM ACCNS OF DOU, TRANSIT OFFICERS MESS, EME AT SATWARI GARRISON UNDER GE SATWARI
2024_MES_636642_1
CWEJP-57/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Satwari
Please refer tender documents
9 documents required · 9 mandatory
₹1,000
Yes
GE Satwari
₹1.8 L
Yes
26 Mar 2024
10 Jan 2024
10 Feb 2024
10 Jan 2024
7 Feb 2024
24 Jan 2024
Amount
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key scrubbing down with water etc . All as splecified and removing unserviceable material out side the premises
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.
Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.
Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge
Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar1:4 complete all as specified.
Rendering 15 mm thick in cement mortar1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement all as specified.
Rendering 15 mm thick in cement mortar1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified.(incl all necessary scaffolding lifting arrangement for three stroy building on external surface)
Rendering 05mm thick in cement mortar 1:3 as in ceiling finished even and smooth w/o using extra cement.
Preparation of new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and preparing the surfaces for distempering and incl a coat of primer complete all as specified.
Preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of cement based paint over and including one coat of primer (up to 4th storey with necessary/scaffolding) complete all as specified and asdirected by Engr-in-charge.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5Sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5Sqm & not exceeding 4Sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00Sqm each and removing from the site all as specified & directed.
Pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm all as specified.
Pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates including lugs, hold fast, lock strike plate etc complete of size 125 x 60mm all as specified.
PCC (1:3:6) Type C1 using 12.5 mm graded crushed stone aggregate for back filling of chowkats and similar work all as specified and as directed.
35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.
35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified
Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
Applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.
Soild PVC door frame of size 50 mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.
All as per descreption of serial item No-22 here-in-before above items but single side prelam PVC sheet used instead of plain PVC sheet to match the colour of door all as specified and as directed.
Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.
Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with Moulded 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing all as specified and as directed.
Butt hinges of mild steel cold rolled medium weight of size 125 mm as specified.
Butt hinges of stainless steel cold rolled medium weight of size 100mm as specified.
Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)
Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)
Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified.
Aluminium Floor door stopper fixed complete all as specified.
Mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed.
25mm outer dia stainless steel plain curtain rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia at both ends. The curtain rod shall be projecting 150 mm outer side from the clear opening of doors/windows. (Including necessary fittings brackets, end ball, wall to wall bracket etc)
Aluminum anodized powder coated frame of size 101.60 x 44.45 made out of 1.20mm thick aluminum section fixed to floor/wall with plugs and screws complete all as specified and directed
Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4.0 mm thick coloured/tinted/frosted glass panes/wire mesh including aluminium grill and all necessary fittings and fixtures complete all as per Engr-in-charge.
Aluminum Power coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m incl necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
Aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.
5.50 mm thick glass sheet ordinary quality Tinted in aluminium doors/windows complete removing and refixing, exceeding 0.5 Sqm in each pane.
Steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar grill, spacing of gril 100 mm center to center and all around flat iron, fixing arrangement as per drg No CEPZ/TD-324,325/0 all as specified and as directed.
Steel Ventilator ( N exc 0.70 Sqm) 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, spacing of gril 100 mm center to center as per drg and all around flat iron and fixing arrangement as per drg No CEPZ/TD-324,325/0 all as specified and as directed.
Applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified
3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden/steel surfaces as in square n exc 0.50 sqm in each pane, all as specified.
3 mm thick figured glass, pin head/frosted type and glazing with oil putty in square n.exc 0.5 sqm in each pane.
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
Taking down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all as spfd.
Taking down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.
15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors.
20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors.
Taking down CI/PVC pipes 110 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.
Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.
UPVC (SWR) Type -A pipes single socketed, 110 mm dia, in any length with rubber ring joints, Fix to wall complete all as specified.
UPVC (SWR) Type -A pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
UPVC (SWR) Type -B pipes single socketed, 75mm dia, in any length with rubber ring joints, fix to wall complete all as specified.
UPVC (SWR) Type -B bends, 75 mm any radius complete all as specified.
UPVC (SWR) Type -B bends, 110 mm any radius complete all as specified.
UPVC (SWR) Type -B junction single, 75mm (Single T) equal or unequal complete all as specified.
UPVC (SWR) Type -B junction single, 110 mm (Single T) equal or unequal complete all as specified.
UPVC (SWR) Type -B junction single, 75 mm (Single T) equal or unequal with access door complete all as specified.
UPVC (SWR) Type -B junction single, 110 mm (Single T) equal or unequal with access door complete all as specified.
UPVC (SWR) Type -B , floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement complete all as specified.
UPVC (SWR) Type -B vent cowl 75 mm dia complete all as specified
UPVC (SWR) Type -B reducers 110 mm dia complete all as specified.
UPVC (SWR) Type -B Branch piece, 75 mmm bore, single (single Y) equal or unequal cpmplete all as specified.
Rendering 15mm thck in cement mortar 1:3 or Plain Cement Concrete as in sunken floors without extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately)
Applying a coat of bituminous primer conforming to IS-3384 on prepared surface of roof/sunken slab after drying of primer apply APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application and finally apply a coat of hot blown 85/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm of plaster surface.
Cement concrete type E-2, 1:5:10 using 40 mm graded crushed stone agregate, in Sunkan ( Up to 4th floor) filling and mass concrete complete all as specified and directed by Emgr-in-charge.
Tall body Single Lever Basin Mixer (Suitable for table top wash hand basin) without Popup waste with 450mm Long Braided Hoses fancy type complete all as specified.
Long body CP pillar cock with 450mm long braided hose, 15 mm bore fancy type complete all as specified and directed by Engr-in-charge/ GE.
Angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified.
CP Bib taps with wall flange,long body, fancy type, cast copper alloy with crutch, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified.
Concealed Stop Cock Heavy Body Casted Cap 15 mm complete all as specified.
Wall Mixer 3-in-1 System with Provision Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange fancy type complete all as specified.
Stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . Complete all as specified.
Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge.
Cromium plated towel rack 600mm long without lower hangers, complete all as specified.
Chromium plated Overhead Shower 125mmx125 mm square shape single flow with shower arm , complete all as specified.
Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm complete all as specified.
Half stall Urinal with complete accessories Set, cp waste cuppling, waste pipe, CP spreader etc. Size: 375 x 390 x 590mm complete all as specified.
Table top wash hand basin with fixing accessories set, not less than size: 500 x 400x13.5 mm, rectangular shape, including CP cupling and PVC waste pipe complete all as specified.
Wall Hung Basin with Fixing Accessories Set, Size : 510 x 400mm, including cuppling and pvc waste pipe complete all as specified.
PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge.
Vitreous china wash down water closet white colour, Size(520x360x390) with 'S' trap, closed pattern with flat bottom, including PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge.
PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge.
WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including provn of trap and in taking out and removal of old WC seat unhygienic condition)
Cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified.
PVC connection 15 mm x 450 mm including PVC check nut at both ends screwed for iron pipe of 15 mm bore.
PVC connection 15 mm x 600 mm including PVC check nut at both ends screwed for iron pipe of 15 mm bore.
Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position.
Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.
Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.
Ball valves, (suitable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
Stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Glazed ceramic coloured Digital tiles in vertical surface 300x450x7 to 8 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick cement mortar 1:4 all as specified.
Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18Sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in cement mortar 1:4.
All as per description of serial item No-98 above but as in vertical surfaces dado/skirting over and including a backing coat of 10mm thick cement mortar 1:4, complete.
Vitrified Ceramic (Double Charged) edge cut joint free coloured or printed any shade tiles 8 to9 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in cement mortar1:4 and laying the tiles alonwith spacer and the gaps filled with epoxy mortar all as specified and as directed.
All as per description of item No-100 here-in-before but as in vertical surfaces dado/skirting over a backing coat of cement mortar 1:4, 10 mm thick complete.
Crushed concrete 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded crushed stone aggregate) as in level course all as specified and as directed.
Placing the spacer on virtified tile flooring/vertical surfaces and the gap to be filled with silicon sealant all as specified and as directed engr in charge.(Note:- Area to be measured flat).
Dismantling of stone slabs and tiles of any description or thickness in floors laid dry or pointed all as specified.
16 to 18 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick cement mortar 1:4 as directed by Engr-in-charge.
Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble over 15 mm thick cement mortar 1:4 as directed by Engr-in-charge.
Rounding to edges of stone slabs on one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
Providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and as directed by Egr in Charge.
Demolition of Re inforced cment concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
Reinforced cement concrete 1:2:4 (Using 20 mm graged crushed stone aggregate) (nominal mix) as in slabs supported on walls, beams and coloumns and the like slab laid in slops all as specified and directed.
Mid steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. all as spfd.
All as per descreption of serial item no-111 here-in-before but TMT bars upto 10mm as in stirrups
Form work to soffits of suspended slabs such as roof slabs, floor slabs, roof beams, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.
Form work to sides and soffits of floor or roof beams, haunchine, girders and similar work all as specified and as directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
Cement concrete type 75 mm thick D- 2,(Using 40mm grated crushedstone aggregate) 1:4:8 as in sub base all as specified.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
Coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigmnets incl 15 mm thick screed bed in cement mortar (1:6) all as specified
40 mm thick Cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate, as in floor finishes/plinth protection and similar works, finished with even and smooth without using extra cement all as specified.
Dismantling of AC or plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof covering.
Dismantling timber scantlings 40 sq. cm and over in section, in any position all as specified.
Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick ( AZ-150 Micron) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates, or flat sections) including distance pieces, cleats etc Fe 410 -W (GDEE- 250) quality A complete all as specified.
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240
Mild steel screw bolt (machine made) dia 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5cm and n exc 30cm long complete all as specified.
PCC 1:2:4 type B 1 using (20 mm graded crushed stone aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.
Dismantling of ceiling board(Fibre,pulp,,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets and aluminiu frame work all as specified.
GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid all as specified and as directed by Engr-in- Chage.
5 mm thick prelam PVC sheet in strips & channel feathered at the edges for fixing on wall inclusive of Solvent Cement and fixing at site all as specified.
Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed. Note: For measurement superficial area in elevation shall be measured.
Factory made 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. One side prelam and other side plain18mm thick Celuka PVC ply for kitchen cabinet shutter and the like and incl Edge bonding tape same colour fixing on the all around shutter complete as per manufacturer's specifications and drawing and as directed.
Factory made 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer complete as per manufacturer's specifications and drawing and as directed.
Factory made 5mm thick PVC of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 5mm thick PVC sheet paneling for back side (wall side) complete as per manufacturer's specifications and drawing and as directed.
Continuous (piano) hinges,Width of flaps (when open) 30 mm heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)
Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust.
Water proofing treatment in the following sequences:- (a) Applying 1st course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely. (b) Applying 2nd coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat complete all as specified and as directed . Make :-Torchstar, Asian Paint, Sieka.
Preparation of newly sufrace of APP Membrane and applying two coats of bituminious based alumunium paint @ 200 ml per sqm etc
15 mm thick plaster in cement mortar 1:4 finished fair and even on RCC roof slab ( upto 4th storey building) incl mixing of integral water proofing compound : Note :- liquid WPC shall be measured and paid for separately)
Supply only Water proofing compound liquid.
Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying one coat of synthetic enamel paint on steel surfaces of any description and as in roof trusses (up to 4th storey with necessary scaffolding) complete all as specified and directed.(Note: Rates to be quoted for multiple tints in grills, gates, decorative items and similar items etc.,,)
Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wood surfaces of any description (up to 4th storey with necessary scaffolding) complete all as specified and directed.
Preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of oil bound distemper on old decorated wall surface including necessary filling of wall care putty on uneven surface as and where required.
Complete removal of existing treatement surfaces by mechanically including washing and rubbing down and preparation of surface of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and a coat of primer complete all as specified.
Preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion paint with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding complete all as specified and directed.
Preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the Ceiling, pillars, cornices etc. complete all as specified and directed.
All as per descreption of serial item No-147 here- in- before but on walls.
Taking down carefully Copper aluminium point wiring light, Fan, socket or power complete including fixture & fitting such as switches, sockets or power socket complete fitting bracket holder, boards, and making good disturbed surfaces of wall and ceiling etc.
Taking down carrefully unserviceable sub main wiring etc.
Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as directed.
Taking down unserviceable MCBS SP/SPN/Isolator etc
Complete point wiring with 1.5 Sqmm single core PVC insulated and sheathed cable 1100 volts, FLRSH grade with multi stranded copper conductor ISI Marked drawn through medium duty PVC concealed conduit fixed to walls /roofs/floors/ceiling etc and including provisons of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to comman earth dolly , including conductor and connected to comman earth dolly,includinng concealed MS box with 3 mm thick laminated sheet cover fixed with brass screws and cup washers for mounting of plate mounting for housing the switches socket outlets , fan regulators etc, all as specified and as directed by Engr-in-Charge for the following
One Light point controlled by one, one way switch 6 Amp complete
One light point controlled by two way switch.
One fan/Exhaust fan point controlled by one switch and one regulator.
One bell/ buzzer point controlled by one, complete all as specified and directed.
One 3 pin switch socket outlet point 5 Amps on independent board.
One 3 pin switch socket outlet point 5 Amps on same board with other switch.
All as per item descreption of serial item no. 153 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.
Fixed In replacement of point wiring complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit, and matching the white wash colour with existing colour and including terminated into suitable module Modular Metal flush Boxes of Make : including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed.
All as per descreption of serial item No-161 but One light point controlled by one 6 Amps one way switch.
All as per descreption of serial item No-161 but One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch.
All as per descreption of serial item No-161 but One bell/buzzer point controlled by one bell push button on independent.
All as per descreption of serial item No-161 but One light point controlled by 2 Nos ,6 amps Two way switch.
All as per descreption of serial item No-161 but One 3 pin socket out let 6 Amp point on independent board
All as per descreption of serial item No-161 but One 3 Pin socket out let 6 Amp point on the same board with other switch.
All as per descreption of serial item No-161 but with 2.5 Sqmm cable for 16 Amps switch sockets out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor.
Replacement of Switch piano made of polycarbonate flush button single pole one way, 6 Amps, 240 V
Supply and fixing switch piano flush button type , single pole two way 5 Amps
Replacement of Piano Bell push made of polycarbonate piano flush type 6 amps , 240 V
Replacement of socket 2-in-1, 5 pin 6 Amps made of polycarbonate flush type complete all as specified and as directed.
Replacement of Socket outlet 3 pin, 15 Amps flush type made of polycarbonate complete all as specified and as directed.
Replacement of Switch piano made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V complete all as specified and directed.
Replacement of Switch modular type of polycarbonate flush button single pole Single module, 6 Amps, 240 V.
Replacement of Switch Modular made of Polycarbonate flush button single pole two way 6 Amps, 240 V.
Replacement of Switch Modular made of polycarbonate flush button single pole single module, 16 Amps, 230/240 V.
Replacement of Bell push modular made of polycarbonate piano flush type 6 amps , 240 V.
Replacement of Socket Modular outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed
Rplacement of Socket outlet Modular 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed.
Ceiling rose ,3 phase ,PVC polycarbonate ,insulated body.
Replacement of modular type Fan regulator 2 Module stepped type (electronic) made of polycarbonate for 1200/1400mm sweep AC ceiling fan.
Replacement of fan regulator electronic flush type on the existing phenolic laminated sheet etc 250 volts AC 50 HZ,100 Watts, 4 step complete all as directed.
Replacement of call bell 240 V, 50 Hz sinlge pole complete all as specified and directed.
Replacement of Ding Dong door bell, AC 230/240 volt single phase complete all as specified and directed.
Replacement of lamp holder pendant/angle type insulated body with back plate all as directed and specified by Engineer-in-Charge.
Replacement of LED lamp suitable for B22 holder of capacity 7 Watt.
Replacement of existing unserviceable T/L fitting on existing wall with New LED Batten for T - 8 LED tube light 18/20 watts with necessary braket,clamps ,incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed by Engineer-in-charge.
Replacement of LED tube rod light 18/20 watts T -8 with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge
Replacement of Recess mounting 2x2 LED luminarie, 36 W deep drawn CRCA housing with high power LED premium white powder coated frame blends seamlessly with ceiling layout, suitable for 600x600 mm modular ceiling grid and also can be suspended with provided kit, complete fitting with all fixing arrangement all as specified and directed by Engr-in-Charge.
Round shape 9/10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Replacement of energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 or equivalant in Crompton/ Philips/ Wipro/jaquar
Submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC Concealed conduit and all accessories fixing on walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed by Engr-in-charge for 2x4 Sqmm and 1x4Sqmm as earth wire
All as per deccreption of serial item No 196 above but 2x6Sqmm and 1x6 Sqmm as earth wire
Replacement of Vertical Distribution Board MCB VTPN 4 way double door suitable for and including MCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCB any type. Note:- (i). MCBs shall be measured and paid separately. (ii) TPN DB and MCB should be of same make.
Replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification
Replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.
Replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.
Replacement of MCB single pole (SP) 240 volt 06-32 amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.
Replacement of MCB Single pole and neutral 240 volt 32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.
Replacement of MCB Single pole and neutral 240 volt 40 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.
Replacement of Casing Caping of size 20 mm, ISI marked complete all as specified.
Taking down and refixing of Ceiling fan/ Exhaust Fans of any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer, all as specified and directed by Engr-in-charge.
Galvanised steel earthing complete with 60 cm x 60 cm x 6 mm thick galvanised steel earth electrode and 04 mm dia galvanised earth lead wire burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth lead 4.0 mm dia GI wire protected by 15 mm bore light grade galvanised iron pipe and other and connected to test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron wire mesh, charcoal and common salt in alternater of 15 cm complete thickness all around the GI plate electrode complete with earth pit PCC 1:3:6 type CI and RCC cover and necesary excavation and earth work in hard/dense soil and disposal of spoil to a distance not exc 50 mtr and necessary testing complete all as shown in electorical plate No 03 connected to earthing test point including following elements/works all as specified.
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to and including 4mm dia galvanized iron wire lead by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 4 Kilogram/Square metre. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified.
Srl item No 208 Contd … (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge.
M/S Shesh Paul Gupta
M/S Jasbir Singh
M/S MOHAN LAL GUPTA
M/S ARUN ANAND
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .