Renovation Extension and Construction for setting of work centers in NML, Jamshedpur for the year of 2021-22 and 2022-23

Amount

Demolishing Brick work in cement mortar manually / by mechanical means upto floor V level including with stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing cement concrete manually / by mechanical means upto floor V level with necessary safety arrangement and scafolding including disposal of material as per direction of EIC,1:3:6 or richer mix.

Dismentling tile work in floors and roofs laid in cement morter including stacking of material within 50 metres lead. For thickness of tiles above 25mm and upto 40mm .

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground as per direction of EIC.

Demolishing reinforced cemenrt concrete manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres as per direction of EIC.

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in, Channels, angles, tees and flats.

Dismentling of Aluminium /Gypsum Partitions, doors, windows, wooden partitions, flase ceilling with stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of EIC.

Disposal of Building rubbish /malba/similar unserviceable, dismantling or waste material by mechanical means , including loading, transporting , unloading to approved municipal dumping ground or approved by Engineer-in -charge , beyond 50 m initial leads for all leads including all lifts involved.

Dismantling doors, windows and clerestory windows ( steel or wood) shutters including chowkhats,architrave, holdfasts,etc. complete and stacking disposal of material as per direction of EIC. Of area 3 Sq. metres and below.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains(not exceding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottom including disposal of excavated soil as per direction of EIC.All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, side of foundations etc. in layer not exceeding 20 cms in depth: consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Supplying and filling plinth with sand under floor including watering,ramming,consolidating and dressing,complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work

a) 1:2:4 (1cement:2coarse sand (zone - III): 4 graded stone aggregate 20mm nominal size.)

b) 1:4:8 (1cement: 4coarse sand (zone - III): 8 graded stone aggregate 40mm nominal size.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for RCC work including straightening, cutting,bending,placing in position and binding all complete. Thermo-Mechanically Treated bars (TMT bars) of grade Fe-500D or more.

Centring and shuttering including strutting,propping,etc. and removal of form for:

a) Foundation,footings,bases of columns,etc.

b) Suspended floor ,roof , landing , shelves, stairs, slabs balconies etc

c) lintels, beams, columns, girders etc

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

12 mm cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand )

15mm cement plaster on rough side. 1:4 (1cement : 4 coarse sand)

6 mm cement plaster of mix: 1 : 3 ( 1 cement : 3 coarse sand )

Neat Cement punning..

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth with stagging complete.

White washing with lime to give an even shade. (two or more coats.) Incl. Scrapping & cleaning with stagging complete

Painting with synthetic enamel paint of approved brand and manufacturing of requred colour to give an even shade.Two or more coat.

Removing dry or oil bound distemper ,water proofing cement paint and the like by scrapping , sand papering and prepaing the surface smooth including necessary repair to scratches etc. complete.

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat).

Finishing wall with waterproofing cement paint of required shade by scrapping and cleaning: (Two or more coat applied @ 3.84kg/10sqm )

Applying one coat of water thinable cement primer of approved brand and manufacture .

Applying priming coats with primer of approved brand and manufacture having low VOC ( Volatile Organic Compound ) Content. With water thinnable cement primer on wall surface having VOC Content less than 50 grams/litre.

Finishing walls with Premium Acrylic Smooth exterior paint of required shade. Old Work(Two or more coat applied @ 1.43 ltr/10 sqm) over existing cement paint surface.

Finishing walls with Premium Acrylic Smooth exterior paint of required shade. Old Work(Two or more coat applied @ 1.43 ltr/10 sqm) over existing cement paint surface.

Providing and fixing on wall face unplasticised-PVC fittings/accessories for UPVC rain water pipes conforming to IS-13592 Type A including jointing with seal ring and fixing on wall with UPVC pipe clips by means of 50x50x50mm conforming to IS-5382 leaving 10mm gap for thermal expansion.

a) 75 mm dia

b) 110mm dia

Providing and fixing on wall face unplasticised-PVC fittings/accessories for UPVC rain water pipes conforming to IS-13592 Type A including jointing with seal ring and fixing on wall with UPVC pipe clips by means of 50x50x50mm conforming to IS-5382 leaving 10mm gap for thermal expansion.

(a) Bend 87.5 degree (i) 75 mm bend

(ii) 110 mm bend

(b) Single tee with door. (i) 75 mm bend

(ii) 110 mm bend

(c) Single tee without door.(i) 75 mm bend

(ii) 110 mm bend

Providing & fixing 18 mm thick gang saw cut mirror polished, premaulded and prepolished machine cut for kitchen plate form vanity counters,window sill, facias and similer location of requered size of approved shade , colour and texture laid over 20 mm thick base cement morter 1:4 with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels----Granite of any any coloure and shade. Area of slab over 0.50 sqm.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Providing & fixing anodised aluminium work for doors, windows, ventilators,cup Board shutter and partion with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285,fixed with rawl plug and screws or with fixing clips, or with expension hold fasteners including necessary filling up of gaps at junction, at top, bottom and sides with requred PVC/neropene felt etc.Aluminum section shall be smooth, rust free, sraight, mitred and jointed mechanicallly whereever requred including cleat angle, aluminum snap beading for glazing/panelling, C.P brass /stainless steel screw, all complete as per architectural drawing and the direction of Engineer in Charge(Glazing and panelling to be paid for separetly).

a) For fixed Portion, Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15)

b) For shutter including fittings, neoprene gasket required (anodised aluminium (minimum anodic coating of grade AC 15)

Providing laying Vitrified floor tiles ( thickness to be specified by manufacturer) with water absorption's less then 0.08% and conforming to IS 15622 of approved make in all colours and sheds, laid on 20mm thick bed of Cement morter 1:4 (1cement:4 Coarse sand) incl. pointing with white cament mixed with pigment of matching shade complete. Size of Tiles 600 x600 mm.

Providing laying Vitrified floor tiles ( thickness to be specified by manufacturer) with water absorption's less then 0.08% and conforming to IS 15622 of approved make in all colours and sheds, in skirting, riser of steps over 12mm thick bed of Cement morter 1:3 (1cement: 3 Coarse sand) incl. pointing with white cament mixed with pigment of matching shade complete. Size of Tiles 600 x600 mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. Size of Tiles 60x30 cm.

Renewing glass panes, with putty and nails wherever necessary.Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200X10 mm size

Providing and fixing oxidised M.S. Handle conforming to IS 4992 with necessary screw ect. Complete. 100 mm

Providing and fixing oxidised M.S. Casement stays (straight peg type) with necessary screw ect. Complete 200mm not less than 120 gms

P/f bright finished brass 100mm mortice latch and lock with 6 lever and a pair of lever handles with necessary screws etc.

P/F powdered coated aluminium work(minimum thickness of powder coating 50 micron) consisting of tee/angle sections of approved make conforming to IS : 733 in frames of false celing including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with rawl plug @ 450mm centre to centre and fixing the frame work to G.I level adjusting hangers 6mm dia with necessary cadmiumplated machine screws all complete as per approved architectural drawing and direction of the engineer-in-charge. (Level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

Providing and fixing 6mm dia G.I. level adjusting hangers of rods (upto 1200mm length) fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fastners 12.5mm dia. 40mm long complete as per direction of Engineer-in- charge.

Providing and fixing Brass 100mm mortice latch and lock with 6levers (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS:6315) having brand logo embossed on the body / plate with double spring mechanism and door upto 125 kg, for door, including cost of cutting floors, embedding in floors as required and making good the same matching to the exiating floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thicknes.

Structural Steel work in single section fixed with or without connecting plate including cutting,hoisting,fixing in position and applying a primina coat of aooroved steel orimer all complete

Cement concrete flooring 1 :2:4 finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing glass strips in joints of cement concrte floors. 40mm wide and 4mm thick.

Kota Stone Flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4(1cement : 4 Coarse sand). 25mm thick

P/F white vitreous china laboratory sink including making all connections excluding cost of fitting 600X450X200 mm.

Providing and fixing PVC Waste Pipe for sink or wash basin. Flexible. 40mm

Providing and fixing white vitreous china wash basin Hindware make including making all connections.(excluding the cost of fittings). 630 x 400mm

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : (15mm dia).

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(15mm nominal bore).

Providing & fixing un-plasticised PVC connection pipe with brass unions of approved quality. 45 cm length of 15mm dia.

P/F C.P brass stop cock of approved quality. 15mm nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting chases with anti corrosive bitumastic for concealled pipes and making good the walls etc.

a) 15mm dia

b) 20mm dia

Providing and fixing GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete.

a) 15mm dia

b) 20 mm dia

c) 25mm dia

d) 50 mm dia

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

P/F S.S. sliding door bolt lSI marked with nuts and screws 300x16mm

Repair and ease the window to open and fix the window properly icluding scraping etc as required.

Providing and fixing 4'' C.P grating , 100 mm dia.

Providing and fixing C.P.Pillar Cock of approved quality (Omco make). 15mm NB.

Providing and fixing G.I. Pipes ( JINDAL make, Class-B), complete with G.I. fittings and clamps i/c cutting and making good the wall etc.for Extermnal work.

a) 15 mm dia NB

b) 25mm dia NB

c) 50 mm dia NB

Providing & fixing bronze gate valve (Screwad type) of approved quality (Zoloto make), including removing the existing damaged one if required.

a) 15mm NB

b) 25mm NB

c) 50mm NB

Dismantling GI pipes including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge. (internal work)

(a) upto 40mm nominal bore

(b) Above 40mm nominal bore

Distemper with oil bound washable distemper of approved brand and manufacture to give an even shed. (two or more coats)

Distempering with dry distemper of approved brand and manufacture to give an even shade (One or more Coats)

Providing and fixing roller in Aluminiun Cupboard Shutter.

Providing and fixing star lock in Aluminiun Cupboard Shutter.

Providing and fixing steel roller in Aluminiun sliding door.

Providing and fixing 15mm dia. C.P. nipple of

a) 50mm length

b) 100mm length

c) 150mm length

Extra for providing and applying/mixing of bonding compound (Latex, SIKA make) in old cement surface, mixing concrete/ cement mortar as per manufacturer's specification.

Scaffolding with bamboo for specified jobs as per direction Engineer -In Charge .

Extra for making of drip course in chajja/Sunshade complete in all respect .

Supply and applying of Rust remover ( Brand- Dr Fixit)on the rusted surface of existing reinforcement.

Providing and fixing white vitreous china wash basin(GARNET, HINDWARE)including making all connections.(excluding the cost of fittings).

Providing & Fixing Ms doors ,windows and ventilators of standerd rolled steel section , joints mitred and welded with lugs , embeded in cement concrete blocks15x10x10cm of 1:2:4 (1cement :2 coarse sand: 4 graded stone aggregete 20 mm nominal size ) with bolts and nuts as required and including applying a priming coats of approved steel primer as required complete.

Providing & fixing PVC pipe including fittings complete. 50mm dia

Providing & fixing PVC flooring, 2mm thik of approved make in all colours, shades as approved by Engineer in change over flooring with specified adhesive complete.

9.00 mm thick square edge PVC Laminated Gypsum Tiles (Armstrong, India Gypsum make) of size 595X595mm, made of Gypsum plaster board, manufactured from natural gypsum and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges seals with face side PVC film which goes around and wraps the edges and is bounded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. (Aluminium frame work shall be paid sepretly)

P/F glazing in aluminium door , window, ventilator, cupboard shutter anf partion etc. with pvc/ neropan gasket etc. complete as per mm Thick Glass pans all complete as per architectural drawings and the direction of Engineer -in - Charge. (paneling to be paid for separatly). With float glass pans 5mm thickness.

P/F 12mm thick prelaminated three layer medium density particle board , interior work, Pre-laminated particle on side and balancing lamination on other side.

Providing and fixing C.P.brass waste coupling (32mm to 40mm ) for wash basin/ kit. Sink of approved quality and colour.Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 45 gms.

Providing and fixing C.P. Bottle trap including all fittings & fixtures for wash basin, Sink and urinal of approved quality and colour.Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263 gms.

Providing & fixing aluminium extruded section body tubular type universal hydraulic door closer (Godrej C071) embossed on the body, door weight upto 36 kg to 80 kg and door width from 701mm to 1000mm),with double speed adjustment with necessary accessories and screws etc.complete.

P/L vitrified Heavy Duty floor tilles ( Somany make, DURASTONE) of 322 x 322 mm (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades ,laid on 20mm thk. cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigments etc. in complete.

P/F chicken mesh on the masonary or RCC work as per the direction. The chicken mesh should be fixed with nails/screws to the wall or RCC.

Fixing anodized aluminum work for doors, windows, ventilators, cupboard shutter and partition with extruded built up standard tubular and other sections, fixed with rawl plug and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etc. including cleat angle, aluminum snap beading for glazing/paneling, C.P brass /stainless steel screw, all complete as per architectural drawing and the direction of Engineer in Charge. ( Aluminum section to supplied by department)

Providing and fixing 5mm thick mirror of superior glass (Modiguard make) complete with fixed to wall tiles with wooden peg, C.P. brass screws, circular bracket and washers as per requirement of size complete .

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by EIC) 0.50 mm (+ 0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5 x 55mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, exculding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.

GLORY ENGINEERING

Shiva and Co

ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.