RESURRECTION OF EXTERNAL ELECTRIC SUPPLY SERVICES FOR MAP Ph 2 SHIVAJI LINE AND SOUTH MILITARY FIRM AT MEERUT CANTT

Amount

Supply, fabrication,installation,testing and commissioning feeder pillar box (KISOK) out door type weather proof, dust vermin proof double door type CPRI approved LT Panel made out of 3.15 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable Size incl PCC foundation for fixing of Panel complete wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Feeder pillar 1&2 in SS-04) Note:- Panel should be as per IS/ICE 61439 Part-I & II type test certificates panel builder should be submitted all certificate before execution the job for item No 1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 28, 32 & 35.

(a) Aluminium busbar of Capacity 400 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming 300 Amps 4 pole 35KA MCCB-01 No & fixed neutral link N with S/C & adj O/L releases phase indication lamps with fuse (c) Outgoing feeders (i) MCCB 40 Amps TP 25 KA-12 Nos, with fixed neutral and S/C and O/L releases (ii) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 400/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (iii) Indicating lamp (RYB) LED Type -01 Set (iv) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning feeder pillar box (KISOK) out door type weather proof, dust vermin proof double door type CPRI approved LT Panel made out of 3.15 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size incl PCC foundation for fixing of panel complete wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Feeder pillar 01,02&01 in SS-01& 02)

(a) Aluminium busbar of Capacity 600 Amps with epproxy insulated supports 3 phase and neutral- 1set (b)400 Amps 4 pole 35KA MCCB-01 No & fixed neutral link N with S/C & adj O/L releases phase indication lamps with fuse (c) Outgoing feeders (i) MCCB 40 Amps TP 25 KA-13 Nos, with fixed neutral and S/C and O/L releases (ii) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 400/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (iii) Indicating lamp (RYB) LED Type -01 Set iv) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning feeder pillar box (KISOK) out door type weather proof, dust vermin proof double door type CPRI approved LT Panel made out of 3.15 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size incl PCC foundation for fixing of Panel complete wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Feeder pillar 02,03& 02,03 & 02,03 & 03 in SS-2,3,5 & 6)

(a) Aluminium busbar of Capacity 400 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : 300 Amps 4 pole 35KA MCCB-01 No & fixed neutral link N with S/C & adj O/L releases phase indication lamps with fuse Outgoing feeders (i) MCCB 40 Amps TP 25 KA-10 Nos, with fixed neutral and S/C and O/L releases (ii) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 400/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (iii) Indicating lamp (RYB) LED Type -01 Set (iv) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning feeder pillar box (KISOK) out door type weather proof, dust vermin proof double door type CPRI approved LT Panel made out of 3.15 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size incl PCC foundation for fixing of Panel complete wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Feeder pillar 01 & 01,04 & 01,02 in SS-3 & 5 & 6)

(a) Aluminium busbar of Capacity 400 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : 250 Amps 4 pole 35KA MCCB-01 No & fixed neutral link N with S/C & adj O/L releases phase indication lamps with fuse Outgoing feeders (i) MCCB 40 Amps TP 25 KA-09 Nos, with fixed neutral and S/C and O/L releases (ii) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 400/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (iii) Indicating lamp (RYB) LED Type -01 Set (iv) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning CPRI approved LT Panel made out of 2 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size incl PCC foundation for fixing of Panel complete wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going ACB and MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Main Panel- 05 For 630 KVA TF)

(a) Aluminium busbar of Capacity 1200 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : Air circuit breaker 1000 Amps 4 pole, Electrical draw out type including thermal maganetic relese 45KA-01 No Outgoing feeders (i) Outgoing MCCB 400 Amps 35 KA 4 pole - 05 Nos, (ii) Outgoing MCCB 200 Amps 25 KA 4 pole - 01 Nos, (iii) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 1000/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (iv) Indicating lamp (RYB) LED Type -01 Set (v) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning CPRI approved LT Panel made out of 2 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size compleate wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going ACB and MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Main Panel- 06 For 500 KVA TF)

(a) Aluminium busbar of Capacity 1000 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : Air circuit breaker 630 Amps 4 pole, Electrical draw out type including thermal maganetic relese 45KA-01 No Outgoing feeders (i) Outgoing MCCB 300 Amps 35 KA 4 pole - 01 Nos, (ii) Outgoing MCCB 250 Amps 35 KA 4 pole - 03 Nos, (iii) Outgoing MCCB 100 Amps 35 KA 4 pole - 01 Nos, (iv) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 1000/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (v) Indicating lamp (RYB) LED Type -01 Set (iv) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning CPRI approved LT Panel made out of 2 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size compleate wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going ACB and MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Main Panel- 1&3 For 500 KVA TF)

(a) Aluminium busbar of Capacity 1200 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : Air circuit breaker 800 Amps 4 pole, Electrical draw out type including thermal maganetic relese 45KA-01 No Outgoing feeders (i) Outgoing MCCB 400 Amps 35 KA 4 pole - 03 Nos, (ii) Outgoing MCCB 200 Amps 35 KA 4 pole - 01 Nos, (iii) Outgoing MCCB 63 Amps 16 KA 4 pole - 01 Nos, (iv) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 1000/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (v) Indicating lamp (RYB) LED Type -01 Set (vi) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning CPRI approved LT Panel made out of 2 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size compleate wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going ACB and MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Main Panel- 02&04 For 500kVA & 400kVA TF)

(a) Aluminium busbar of Capacity 800 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : Air circuit breaker 630 Amps 4 pole, Electrical draw out type including thermal maganetic relese 45KA-01 No Outgoing feeders (i) Outgoing MCCB 200 Amps 35 KA 4 pole - 04 Nos, (ii) Outgoing MCCB 63 Amps 25 KA 4 pole - 02 Nos, (iii) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 1000/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (iv) Indicating lamp (RYB) LED Type -01 Set (v) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning feeder pillar box (KISOK) out door type weather proof, dust vermin proof double door type CPRI approved LT Panel made out of 3.15 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size incl PCC foundation for fixing of Panel complete wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Feeder pillar No 03 in SS-3 at SMF)

(a) Aluminium busbar of Capacity 400 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : 250 Amps 4 pole 35KA MCCB-01 No & fixed neutral link N with S/C & adj O/L releases phase indication lamps with fuse Outgoing feeders (i) MCCB 40 Amps TP 25 KA-10 Nos, with fixed neutral and S/C and O/L releases (ii) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 400/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (iii) Indicating lamp (RYB) LED Type -01 Set (iv) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning feeder pillar box (KISOK) out door type weather proof, dust vermin proof double door type CPRI approved LT Panel made out of 3.15 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size compleate wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Feeder pillar 01 in SS-4 at SMF)

(a) Aluminium busbar of Capacity 400 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : 250 Amps 4 pole 35KA MCCB-01 No & fixed neutral link N with S/C & adj O/L releases phase indication lamps with fuse Outgoing feeders (i) MCCB 40 Amps TP 25 KA-09 Nos, with fixed neutral and S/C and O/L releases (ii) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 400/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (iii) Indicating lamp (RYB) LED Type -01 Set (iv) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning CPRI approved LT Panel made out of 2 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size compleate wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going ACB and MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Main Panel- 03 For 630 KVA TF at SMF)

(a) Aluminium busbar of Capacity 1200 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : Air circuit breaker 1000 Amps 4 pole, Electrical draw out type including thermal maganetic relese 45KA-01 No Outgoing feeders (i) Outgoing MCCB 250 Amps 35 KA 4 pole - 04 Nos, (ii) Outgoing MCCB 200 Amps 25 KA 4 pole - 03 Nos, (iii) Outgoing MCCB 100 Amps 25 KA 4 pole - 01 Nos, (iv) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 400/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (v)Indicating lamp (RYB) LED Type -01 Set (vi) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning CPRI approved LT Panel made out of 2 mm thick CRCA sheet fixed on angle iron frame/chanel of suitable size compleate wiring aluminium bus bar chamber cable alley, cable glands brass crommium plated of diffrent sizes suitable for incoming and out going ACB and MCCBs panel painted with powder coated paint and all specified for the following items:- ( Note: Main Panel- 04 For 315 KVA TF at SMF)

(a) Aluminium busbar of Capacity 800 Amps with epproxy insulated supports 3 phase and neutral- 1set (b) Incoming : Air circuit breaker 630 Amp 4 pole, electrical draw out type including thermal maganetic relese 45 KA -01 No. Outgoing feeders (i) Outgoing MCCB 200 Amps 35 KA 4 pole - 04 Nos, (ii) Outgoing MCCB 63 Amps 25 KA 4 pole - 02 Nos, (iii) Multimeter having all parameters (cureent , voltage, power factor ,frequency - phase wise and total, energy, power ,demand - phase wise and total,harmonics upto 31 order TDD,THD,THD i&v) multiple SCADA compatible with serial communication port RS 485, Mod bus TCPIP.Class acuracy 0.5 S or better including CT 1000/5 and suitable PT ( Make; ABB, Scheinder,Siemens) (iv)Indicating lamp (RYB) LED Type -01 Set (v) Panel wiring with PVC insulated single core 2.5 sqmm copper cable

Supply, fabrication,installation,testing and commissioning CPRI approved 440V AC LT APFC Panel indoor/outdoor type, Compartmentalized, Modular, Indoor type in 2 mm thick CRCA sheet of appropriate size, Front Operatable double doors, Front & Back Openable only, Dust & vermin proof, Cable entry through 2.00 mm CRCA Gland plates- Bottom only, Powder coated after 7-Tank Pre-treatment process - Siemens grey shade on body/doors & Orange shade on Mountung/ Gland Plates + Incomer Doors, 3phase HR sleeved Color Coded Aluminium Main Busbar of 500A-3 Nos with Transparent FRP Covers & on SMC/DMC Supports, 25x6MM Aluminium Earth Busbar running across the whole length of the LT Panel with 2Nos. Studs at both the side-ends, Lifting arrangement/Hooks at the Top, wiring with Appropriate Size of Copper Industrial Cables, Black Painted Base frame- 40x40x6 MM MS angle Frame, Cable glands brass crommium plated of diffrent sizes suitable for incoming & outgoing ACB and MCCB's and fitted with following specified items :- ( Note: APFC Panel for 315 KVA TF at SMF)

Supply, fabrication,installation,testing and commissioning CPRI approved 440V AC LT APFC Panel indoor/outdoor type, Compartmentalized, Modular, Indoor type in 2 mm thick CRCA sheet of appropriate size, Front Operatable double doors, Front & Back Openable only, Dust & vermin proof, Cable entry through 2.00 mm CRCA Gland plates- Bottom only, Powder coated after 7-Tank Pre-treatment process - Siemens grey shade on body/doors & Orange shade on Mountung/ Gland Plates + Incomer Doors, 3phase HR sleeved Color Coded Aluminium Main Busbar of 700A-3 Nos with Transparent FRP Covers & on SMC/DMC Supports, 50x5MM Aluminium Earth Busbar running across the whole length of the LT Panel with 2Nos. Studs at both the side-ends, Lifting arrangement/Hooks at the Top, wiring with Appropriate Size of Copper Industrial Cables, Black Painted Base frame- 40x40x6 MM MS angle Frame, Cable glands brass crommium plated of diffrent sizes suitable for incoming & outgoing ACB and MCCB's and fitted with following specified items :- ( Note: APFC Panel for 630 KVA TF, Shivajilines and SMF)

Supply, fabrication,installation,testing and commissioning CPRI approved 440V AC LT APFC Panel indoor/outdoor type, Compartmentalized, Modular, Indoor type in 2 mm thick CRCA sheet of appropriate size, Front Operatable double doors, Front & Back Openable only, Dust & vermin proof, Cable entry through 2.00 mm CRCA Gland plates- Bottom only, Powder coated after 7-Tank Pre-treatment process - Siemens grey shade on body/doors & Orange shade on Mountung/ Gland Plates + Incomer Doors, 3phase HR sleeved Color Coded Aluminium Main Busbar of 500A-3 Nos with Transparent FRP Covers & on SMC/DMC Supports, 25x6MM Aluminium Earth Busbar running across the whole length of the LT Panel with 2Nos. Studs at both the side-ends, Lifting arrangement/Hooks at the Top, wiring with Appropriate Size of Copper Industrial Cables, Black Painted Base frame- 40x40x6 MM MS angle Frame, Cable glands brass crommium plated of diffrent sizes suitable for incoming & outgoing ACB and MCCB's and fitted with following specified items :- ( Note: APFC Panel for 500 KVA TF Shivaji line and SMF)

Supply, fabrication,installation,testing and commissioning CPRI approved 440V AC LT APFC Panel indoor/outdoor type, Compartmentalized, Modular, Indoor type in 2 mm thick CRCA sheet of appropriate size, Front Operatable double doors, Front & Back Openable only, Dust & vermin proof, Cable entry through 2.00 mm CRCA Gland plates- Bottom only, Powder coated after 7-Tank Pre-treatment process - Siemens grey shade on body/doors & Orange shade on Mountung/ Gland Plates + Incomer Doors, 3phase HR sleeved Color Coded Aluminium Main Busbar of 500A-3 Nos with Transparent FRP Covers & on SMC/DMC Supports, 25x6MM Aluminium Earth Busbar running across the whole length of the LT Panel with 2Nos. Studs at both the side-ends, Lifting arrangement/Hooks at the Top, wiring with Appropriate Size of Copper Industrial Cables, Black Painted Base frame- 40x40x6 MM MS angle Frame, Cable glands brass crommium plated of diffrent sizes suitable for incoming & outgoing ACB and MCCB's and fitted with following specified items :- ( Note: APFC Panel for 400 KVA TF Shivajiline)

Excavation in trenches in soft/loose soil n. exc. 1.5 m wide and n. exc. 1.5 m depth and getting out, including trimming the sides and forming bottom surface to required levels for fixing pole/stay assembly and laying/taking out cables complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing of excavated material (soils) to a distance not exceeding 50m and dispositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

M&L Sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable) completed all as specified and directed. Note:- Punned thickness only will be considered for payment.

Supplying and laying un-reinforced precast concrete cable covers class HV, Type I, flat, size 300mm x 180mm x 40mm, ISI marked complete all as specified and directed.

M&L for fly ash old size bricks , straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3 core 240 sq mm. Note : Excavation and earth work sand cushioning brick cover and protection pipe etc shall be measured and paid for separately.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3 core 185 sq mm. Note : Excavation and earth work sand cushioning brick cover and protection pipe etc shall be measured and paid for separately.

Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm

Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm to 300 sqmm

Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm

Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm to 400 sqmm

Supply & Laying jointing, testing and commissioning LT XLPE, PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor passing through pipes, induct, on poles, in trenches etc complete of following sizes. Note : Excavation and earth work , sand cushioning , brick cover and protection pipe etc shall be measured and paid for seperately.

300 Sqmm, 3.5 core

240 Sqmm, 3.5 core.

150 Sqmm, 3.5 core.

120 Sqmm, 3.5 core.

95 Sqmm, 3.5 core.

70 Sqmm, 3.5 core.

16 Sqmm, 4 core.

Supply & fixing or laying galvanised steel tubing medium grade (ISI marked) for protection of under ground cable on poles/ walls under road crossing inculding necessary L-bow etc of following sizes.

80 mm bore

50 mm bore

40 mm bore

M & L for boaring in any type of soil under road 1.5 Mtr below the top surface of road by conventional method complete for passing through 40 mm to 80 mm dia GI pipe and filling earth after laying of pipe including disposal of suplus soil complete all as specified and directed.

Supply, installation, testing and commissioning indoor type step down transformer of capacity 630KVA, 11KV/415 Volts (at NO load), AC 3 Phase, 50 Hz, core type double copper wound, oil immersed, naturally cooled, oil natural-Air natural (ON/AN) with external cooling tubes, delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector group Dyn-11 with Neutral brought out on secondary side (LV side) and having tappings at (-) 5% and 5% on 5 step on HV side to be changed by means of hand operated OFF load tap changer gear and transformer should conforming to level-3 of IS-1180:2014. The maximum temperature rise should not 45 degree Celsius as per OEM recommended in oil and 55 degree Celsius in HV/LV winding when measured by resistance method after continuous full load run on an ambient temperature of 40 degree Celsius. Transformer shall comprise of the following items:- (a) One cable box LT side (Secondary side) consisting of four Nos porcelain bushing with copper rods complete with nut & washers with one No cable gland suitable for indoor mounting transformer / taking out of 240 Sqmm 3 ½ core LT 1100 volts grade XLPE insulated and PVC sheathed heavy duty armoured cable including gland, joint & jointing material complete all as specified. (b) HT side (Primary side) consisting of three Nos porcelain bushing with copper rods complete with nut & washers with one No cable gland suitable for indoor mounting transformer, 11000 volts grade XLPE insulated heavy duty armoured cable 3 core including gland, joint and jointing material complete all as specified. (c) Oil conservation with filter type drain value and oil level gauge complete. (d) De-hydrating breather with first fill of dehydrating agent (Silica gel) complete. (e) Explosive vent & thermometer pocket on tank cover, oil level guage, oil drain filter valve, lifting lugs, oil filing hole with cap / plug with connection plate complete, air release valve plug and four Nos solid cast steel detachable rollers. (f) One 100 mm dia, dial type thermometer , vapour pressure type having range 0-120 degree Celsius with metal guard having maximum perimeter temperature reading indicator with re-setting device. (g) Four earthing terminals on tanks cover to facilitate fixing of 32mm * 6 mm galvanized iron earth strip for earthing of neutral & body. (h) Rating plate and terminal marking dioagram plate. (i) Extra bushing for neutral in the LT cable box for providing independent set of earthing for neutral.

All as per item No 63 but of copper wound transformer step down, indoor type complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS 1180:2014 of capacity 500 KVA.

All as per item No 63 but of copper wound transformer step down, indoor type complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS 1180:2014 of capacity 400 KVA.

All as per item No 63 but of copper wound transformer step down, indoor type complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS 1180:2014 of capacity 315 KVA.

All as per item No 63 but of copper wound transformer step down, indoor type complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS 1180:2014 of capacity 100 KVA.

M&L for preparation of old painted surfaces of erected steel tubular swaged poles / Rails/Girder poles of 11 M long HT Pole ( Except embedded portion) including all MS work mounted on pole (i.e X-Arms,Chanels), earth protection & water pipe ( if exists) and providing one coat of aluminium paint and providing 04 Nos bands/ straps with two coats of Retro Reflective paint ( black and red 30 cm wide each) from top of plinth block complete all as specified.

Taking up and Laying jointing, testing and commissioning LT XLPE, PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor should be through pipes, induct, on poles, in trenches etc as taken out from ground of existing cable as required length to complete of following sizes.Note : Excavation and earth work , sand cushioning , brick cover and protection pipe etc shall be measured and paid for seperately.

400 Sqmm, 3.5 core

300 Sqmm, 3.5 core

240 Sqmm, 3.5 core.

150 Sqmm, 3.5 core.

120 Sqmm, 3.5 core.

95 Sqmm, 3.5 core.

70 Sqmm, 3.5 core.

16 Sqmm, 4 core.

Supplying & fixing in repair LED street light fitting 70-92 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat reistant complete with driver, lamp bracket with impact and corrosion resistant with minimum efficiency of 110 luman/watt including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed.

S& F service main distribution (SMC JUNCTION BOX) box minimum inside size 300x200x105 mm with Bus bar 200 amps 4 pole dor distribution of multiple nos of service connection, (ISI marked) weather and moisture-proof, nuts and bolted bus bar system, 200 Amps capacity and fixing on pole/wall with suitable FI clamp nuts and bolt complete all as specified and directed.

Supply & fixing 1.5 Sqmm three core (nominal area) PVC insulated and PVC sheathed multi starnded unarmoured Copper conductor cable LT 1100 volt grade FRLS drawn through pole for connecting to street light and pole JBs with cable terminal pole wirings connecting up with streetlight feeder (Junction box) complete all as specified and directed Engr -in-Charge.

S & F GI wire of size 3.14 or 4 mm dia complete all spd and directed

S & F GI strip of size32x6 mm dia complete all spd and directed

Supply and fix danger notice plate made of 1.6 mm thick mild steel sheet, vitreous enameled white of size 25 x 20 cm with letter, figures and conventional skull bones in signal read colour and fixed with mild steel clamps (made of 25x3 mm MS flat iron) nuts, bolts and washers etc for HT poles/ gate etc with voltagte and danger indiated in Hindi and English complete all as specified and directed.

Supply and fix danger notice plate made of 1.6 mm thick mild steel sheet, vitreous enameled white of size 20 x 15 cm with letter, figures and conventional skull bones in signal read colour and fixed with mild steel clamps (made of 25x3 mm MS flat iron) nuts, bolts and washers etc for LT poles/ gate etc with voltagte and danger indiated in Hindi and English complete all as specified and directed.

Finding out the cable fault of any size and any capacity of cable from HT/LT 1100 Volt grade to 33000 KV with the help of cable fault loacator and with Necessary disconnection of cable from two ends and connection after repairs and having the following items with electrician at site up to length of 0.5 KM cable complete all as specified and directed:- (a) Surge Generator with accessories - 01 Nos,(b) Head Phone - 01 Nos ,(c) Pin Point set T-505 with accessories - 01 Nos (d) Earthing cable with clamp - 01 Set ,(e) Cable fault locator T-905 with accessories - 01 Nos ,(f) TC-808 with accessories - 01 Nos ,(g) Soldering Iron - 01 Nos ,(h) Plier - 01 Nos ,(j) Soldering paste - 01 Nos (k) Capacitor Unit - 01 Nos ,(l) Capacitor connecting cables - 01 Nos ,(m) Power cable - 01 Nos (n) Nose plier - 01 Nos ,(o) Card for SSG -1100 - 01 Nos. Note:- Transportation charge for shifting cable fault locater will deem to be including send job and nothing extra on this account will be admissible.

M&L for Repair of existing Lt Panel ( opening and refixing of all switchgear and accessories after servicing incl minor repair/replace of switch gear and repair/replacement of wiring accessories) and welding of broken panel door hinges/ fixing of missing part of doors and preparation of old painted surfaces with smoke grey poweder coated paint with the help of spray gun of lt panel along with numbering of incoming/ outgoing feeders and broken plinth complete all as specified and directed by Engr-in-charge Note : All necessary spare parts/required items to be included in quoted rate.

Internal Electic Supply

M&L for point wiring with PVC insulated fire retardant low smoke stranded copper conductor cable of 1.5 sqmm in existing PVC concealed non metallic conduit (ISI Marked) medium grade not less than 20 mm with all accessories and including pressed steel sunken terminal boxes (for mounting switches / regulators//bell push etc ) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke stranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting all as specified and directed by Engr-in-Charge (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note :In ceiling Portion surface conduit wiring shall be carried out.

One light point or one fan point or bell point controlled by one switch SP one way 230 Volts.

One 5 pin socket out let 5/6 Amps on same board.

All as per Sl item No 88 here in before but wiring with FRLS , Multistranded copper conductor cables in PVC Casing and capping Note : Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

M&L for point wiring for one 5 pin 6 amps socket point controlled by one switch 6 amps on independent board with PVC insulated fire retardant low smoke multistranded copper conductor cable of 1.5 sqmm in and including PVC concealed non metallic conduit (ISI Marked) medium grade not less than 20 mm dia with all accessories and including pressed steel sunken terminal boxes (for mounting switches/socket etc ) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke stranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engr-in-Charge (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note :In ceiling Portion surface conduit wiring shall be carried out.

All as per item No 91 above but with 2.5 sqmm FRLS cable PVC insulated unsheathed multistrand for 2 in 1 15/16 amp multipurpose socket outlet including 2.5 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete.

All as per Sl item No 91 here in before but wiring with FRLS , Multistranded copper conductor cables in PVC Casing and capping Note : Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

M&L for switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body.

M&L for Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body.

M&L for socket out let, 6 pin 5 and 15/16 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body.

M&L for socket 5 amps 5 pin flush type, 240 volts. with polycarbonate body.

M&L for ceiling rose surface bakelite 2 to 3 terminals with polycarbonate body.

S&F step type Fan regulator electronic type with hump free polycarbonate body suitable for control of speed of Fan 0-100% in 5 step and connecting to ceiling rose complete all as required and directed by Engr-in-Charge

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles, current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 40 to 63 AMP, in the MCB DB Complete with connection testing and commissioning

S & F lamp holder with lamp holder batten type polycarbonate body with back plate for batten fitting, fixing with proper round block all as directed by Engr-in-Charge.

S & F LED 9 watt PF>0.90, 230 volts retrofit type complete all as specified and directed. Make: CG/C&S/Havells.NOTE:- The contractor shall produce LM-79 & LM-80 test repots from NABL accredited lab .

Supply and fixing in replacement of LED light fitting 1x9w/1x10w bulk head luminaires incl LED light driver holder connecting up to three core flexible copper conductor cable of suitable size.

Supply and fixing LED lights fitting 1x 20W, 4feet 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver including connecting up with two/three core flexible copper conductor cable of suitable size complete

Supply & Fixing ceiling fan 1200mm sweep AC single phase 230/240 V , BLDC type, energy efficient five star rated including all accessories and connected with PVC insulated overall sheathed flexible multistranded copper conductor cable 3 core of size 0.50 sqmm complete all as specified and directed by Engr-in-Charge.

Supply & Fix in replacement of sheet metal enclosure with DB's ( grouted in walls) double door type for MCB's DB 08 ways with 200 Amps 240 volts rated bus bar all as specified.

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified

S & F High performance IP66 LED Streetlight 30 watt, housing made of die-cast aluminium, with street optic lens,with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose, and 30 Watt light with minimum efficiency of 110 luman/watt etc. drawn through and including 32mm bore GI light grade protecion pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

B/R Part

Surfaces ecavation n,exc 30 cm deep and averaging 15 cm deep and getting out hard/dense soil

M&L hardcore broken stone or boulders of gauge n,exc 63 mm deposited spread and levelled in layers n, exc 15 cm thick watered and rammed ta a true surfaces surfaces

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete.

M&L sand filling 30 m thick under the interlocking tille water and consolidate complete

M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete all as specified and directed

M&L cement concrete in roof kerbs or muds stops rounded or chamfered typeB1 1:2:4 ( 20 mm graded aggregate )

Taking down cement plaster on brick or concrete or stone walls surface including racking out joints, hacking for keys, scrubbing down with water etc complete all as spd and directed.

Materials & labour for applying 15mm thick in cm 1:4 on brick walls or concrete surface of finished even and fair all as specified and directed.

Demolition of brick work or stone/boulder masonry laid in cement mortar in any description as directed.

M&L for brick work with brunt bricks straight or curved on plan to any radius built in CM 1:6 all as specified and directed by Engr -in-Charge

M&L for preparing new plastered surface of wall and applying two coat of cement base paint over a coat of primer etc all as specified and directed by Engr -in-Charge

Complete removal of existing treatment from walls , pillars and cornices washing, rubbing down and stopping of distempered and painted surfaces and cleaning the entire area(existing treatment may be of either white wash /colour wash/dry distemper /oil bound distemper /enamel paint) and making the wall surface smooth and applying twooil bound distemper all as specified and directed

M&L preparing old cement base distempered surfaces of walls by washing, rubbing down and stopping of surfaces and applying two coats with cement base paint , white or tinted including and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of old plastered or unplastered surafces of ceilings and applying two coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L PCC 1:3:6 type D2 ( using 40mm graded crushed stone aggregate) as in foundation filling sub base and mass concrete all as specified.

S&F Hand rail, half round or other section or core for wooden hand rail straight portion drilled and countershunk for baluster,nosing to steps including embeding in concrete and screwing etc,wind ties for roof including screwing bolts,post and struts running bars for doors, post and strut in fencing including cutting top to shape as directed, drilling hole for wire etc, Flat iron fillet for wire mess and similar work, confirming to Fe-290 Grade E -165

S&F in repair galvanized two strand steel barded wire 2.24 mm dia barbed with 2mm dia barbs of 75mm specing and straining and fixing to any type of standard rails standing bolt including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed ( Each line measured separately)

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete

Materials & Labour for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer all as specified.

M&L preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all drops , , dirts etc. complete all as specified.

Material and labour for greasing the steel rolliing shutter including opening top cover and repair spring etc greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional complete all as directed by Engr in charge(Area exceeding 4 Sqm and not exceeding 7.5 Sqm of each sutter)

Removing buiding material like sand ,aggregate soil and old debris to a distance upto 1 Km beyound the lead included rate including loading and unloading and stacking destination complate

Leo Air and Power Solution pvt Ltd. (BID ID -3331032)

SAGGI ELECTRIC COMPANY (BID ID -3326385)

Raman Electric Trading Co (BID ID -3331555)

BHARAT ELECTRICAL TRADERS (BID ID -3332012)

United Sales Corporation (BID ID -3331979)

GEPS PROJECTS (BID ID -3331798)

YAUK ENGINEERS (BID ID -3331890)

Sudhir Sharma Associates (BID ID -3326986)

Shekhar Enterprises (BID ID -3331653)

M/S B.DAYAL (BID ID -3329272)