Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
8 Jun 2026, 10:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
08
1 condition · 1 needing a document upload
Supply should be as per tender description and specification.
47 conditions · 3 needing a document upload
Have you read and accepted tender conditions?
Have you furnished the statement of deviations [preferably nil] deviation details shall be mentioned at respective field only?
Have you attached any performance statements separately?
Are you coming under MSE status given as per guidelines issued by Railway Board for purchase preference vide letter No. 2010-RS [G] -363-1 Dt. 05.07.2012 or latest.
If yes, have you attached valid documents towards being MSE?
Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers. Other conditions will be as per attached tender document.
Have you attached valid UDYAM certificate if applicable to you?
Have you quoted delivery period correctly and precisely?
To be delivered at concerned destination. Delivery at single point is not acceptable. In case, tenderer quote for delivery of entire tendered quantity to one consignee against Railway%u2019s requirements of delivery to multiple consignees, such offer shall be considered valid only for quantity required as per tender schedule by the consignee to whom delivery is offered by the tenderer and it shall be considered that there is no offer for remaining consignees.
Have you quoted Mode of dispatch on FOR destination basis for free delivery at destination with rate structure clearly indicating the basic rate, GST and freight etc, up to destination [consignees premises].
Have you quoted the discount if any in the specified column only in IREPS?
Have you furnished Bank account details such as Name of the Bank and address, account no., MICR, IFSC code and type of account to facilitate EFT payment?
Firm to indicate make-model-brand offered if any.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Bidders should confirm following certificate for Compliance. (a) I have read the clause 13.8.3 of Instructions to tenderers and general conditions of tenders for supply contract attached with the tender regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries. (b) I certify that this bidder is not from such a country and will not subcontract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I also certify that this bidder will not offer any products/services of entity from such countries unless such entity is registered with the Competent Authority. (c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (d) I hereby acknowledge that in the event of acceptance of my bid on above certificate and if the certificate is found to be false at any stage, the false certificate would be a ground for immediate termination of contract and further legal action in accordance with the Law. (Bidders confirming this certificate for Compliance shall select Yes in the Complied column. However, in case you do not confirm above certificate for Compliance, select NO in the complied column. In such cases you are required to submit the certificate for Compliance as per Instructions to tenderers and general conditions of tenders for supply contract along-with their Bid/Offer
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
4 locations across Karnataka · 104 Numbers total
OFFICE FURNITURE
L8265738A
L8265738A
Limited - Indigenous
Goods
Karnataka
₹0
Exempted
8 Jun 2026
3 Jun 2026
11 items · 104 Numbers total
SS Luggage rack; SS Rack with 1inch square tube, 7?x2?x5? (Length x Width x Height) feet?s , 03 Selves of SS material with 1 inch square tube support to carry weight, (distance between 2 shelves 2 fe et). Similar to pic enclosed. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/SBC, SWR | Karnataka | 1.00 Numbers |
| Total | 1 Numbers | |
Dining table plastic: Nilkamal or Similar, GeM id attached 5116877-82561669557 ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/SBC, SWR | Karnataka | 2.00 Numbers |
| Total | 2 Numbers | |
Writing table; MS 1 inch square tube frame with powder coating, size:34?H X 18?W X 28?L in ches, Pre-laminated plywood board fixed on top (30 x 20 inches) bottom of the frame supported with same square tube in ?I? shape. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/SBC, SWR | Karnataka | 30.00 Numbers |
| Total | 30 Numbers | |
Three Seater(03) stainless steel chair: with Cushion seat, back & arm. 1.SEAT/BACK ASSEMBL Y: The seat should be made up of 1.2 mm. thick hot-pressed plywood and upholstered with fabric or synthe tic leather and molded Polyurethane Foam. The back should be made up 1.2 mm. thick hot-pressed plywoo d upholstered with replaceable fabric or synthetic leather upholstery covers and molded polyurethane foa m. The back ply and foam should be designed with contoured lumber support for comfortable seating postu re. MID BACK, SIZE 48.0cm.(W) X 64.5cm.(H). SEAT SIZE 51cm.(W) X 48cm.(D) 2.HIGH RESILIENCE (HR) PO LYURETHANE FOAM: for seat and back should be molded with density = 45 kg/cu mtr, thickness 40 mm. 3. ARMREST: armrest top should be made of molded polyurethane (P.U) and mounted on to a fixed type M.S. t ubular armrest support which should be chrome plated. 4. FIXED BACKREST: The backrest cons should be o f a fixed type mechanism i.e. no back up/down adjustment. 5. LEG FRAME ASSEMBLY: The leg frame welded assembly should be chrome plated. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/KJM, SWR | Karnataka | 3.00 Numbers |
| Total | 3 Numbers | |
Chairs plastic; Nilkamal or Similar, GeM id attached5116877-91042532293 ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/SBC, SWR | Karnataka | 12.00 Numbers |
| Total | 12 Numbers | |
Office tables (1350 X 750 X 20mm) IS 8126 specifies, table top materials: Medium Density Fi breboard (MDF) or plywood. mild steel tubular/square pipe thickness not less than (1.2) mm, with a wall thi ckness not less than (1.6) mm. Storage Units: include 03 drawers? right side, and a filing unit left side with one shelf. Handles: Drawers and locker doors must have a corrosion-resistant metal handle or a built-in pull mechanism. Locks, storage units: Drawer and locker locks must conform to IS 729: 1979, and be at least a six-lever lock with non-corrosive duplicate keys. Studs: Studs for tubular pedestals must be made of rubber or suitable plastic. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/KJM, SWR | Karnataka | 8.00 Numbers |
| CCRC/SBC, SWR | Karnataka | 2.00 Numbers |
| SSE/AC LOCO TRIP SHED/SBC, SWR | Karnataka | 2.00 Numbers |
| Total | 12 Numbers | |
Study table plastic: Nilkamal or Similar, GeM id attached 5116877-82561669557 ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/SBC, SWR | Karnataka | 2.00 Numbers |
| Total | 2 Numbers | |
Supervisor Chairs, with Synchronic tilt mechanism, 360 degree-revolving type and upright loc king, pneumatic height adjustments, with adjustable arm rest, push back rest with External Lumbar Suppor t with Inner frame Upholstered with Mesh fabric and mounted on main assembly, separate adjustable headr est, seat with Upright locking and pressed & moulded with PU foam 50 kg/cu mtr with 40mm thickness, Chr ome plated MS Pedestal Base, 5 Nos Nylon Twin wheel castor. [ Warranty Period: 30 Months after the dat e of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/KJM, SWR | Karnataka | 4.00 Numbers |
| CCRC/SBC, SWR | Karnataka | 3.00 Numbers |
| Total | 7 Numbers | |
Rack for Walkie /Talkie Charging: Supply and installation of cabinet of 54(9x6) pigeon holes ( 8" width x 8" height) overall size: 75" length x 48"+6" height x 9" width, electrical wiring with 3 pin sockets in all the pigeon holes and control switches on top, with 1 main circuit breaker, Material: 1 mm powder coat ed MS sheet, bullet legs and bush at the bottom. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/SBC, SWR | Karnataka | 1.00 Numbers |
| Total | 1 Numbers | |
MS 4 Drawers file cabinet: MS Material with 1.2 mm thickness powder coated, Size 1369H X 675L X 475W, including pedestal [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/KJM, SWR | Karnataka | 3.00 Numbers |
| Total | 3 Numbers | |
Visitor/staff Chairs:Cantilever round tubular under structure, seat with moulded PU foam den city35 kg/cu mtr, 40 mm thickness, with polyster fabric upholstery, backrest: moulded plastic mesh fabric, with continuous arm rest (MS crome plated). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCRC/KJM, SWR | Karnataka | 6.00 Numbers |
| CCRC/SBC, SWR | Karnataka | 20.00 Numbers |
| DEE/TRO/SBC, SWR | Karnataka | 5.00 Numbers |
| Total | 31 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5756843.pdf
ATTACHMENT
5756846.pdf
ATTACHMENT
5757111.pdf
ATTACHMENT
5756718.pdf
ATTACHMENT
5756713.pdf
ATTACHMENT
5756792.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .