WBPWDTE/EE/BED/NIQ_90/Q of 2024-25

Amount

Supply, Installation,Testing & Commisioning of Micropresssor controlled Addressable photo smoke sensor with Base Two-wire SLC loop connection, Unit uses base for wiring.Compatible with FlashScan® and CLIP protocol systems,Stable communication technique with noise immunity,Designed to meet UL 268 7th Edition,Factory preset at 1.5% nominal sensitivity for panel alarm threshold level, LED “blinks” when the unit is polled (communicating with the firepanel) and latches in alarm. Low standby current.( Make-Notifier/Honeywell/ Johnson Controls / Edward/ Secutron/ Securiton/ Apollo)

Supply, Installation,Testing & Commisioning of Micropresssor controlled Addressable Loop Control Module. Adds SLCs to NFS-3030/ NFS2-3030; NFS-3030/NFS2-3030 supports up to five LCM- 320s and five LEM-320s.

Supply, Installation,Testing & Commisioning of Micropresssor controlled Addressable Loop Expander Module. Expands each LEM used on the NFS-3030/NFS2-3030; expands NFS-640/NFS2-640 to two loops.(Make-Notifier)

Supply, Installation,Testing & Commisioning of CPU 3030D Certified for seismic applications when used with the appropriate seismic mounting kit. • Approved for Marine applications when a marine-listed version is used with marine-listed compatible equipment. See DN-60688. • Complies with UL 2572 Mass Notification Systems (NFS2-3030 version 20 or higher). • One to ten isolated intelligent Signaling Line Circuits (SLC) Class A, B, or X. • Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology. See DN-60820. • Up to 159 detectors and 159 modules per SLC; 318 devices per loop/3,180 per FACP or network node. – Detectors can be any mix of photo, thermal, or multi-sensor; wireless detectors are available for use with the FWSG(A). – Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG(A). • Large 16 line, 640 character LCD backlit display or use displayless as a network node. • Network options: – High-speed network for up to 200 nodes (N16e/x, NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM, ONYXWorks, NFS-3030, NFS-640, and NCA). – Standard network for up to 103 nodes (N16e/x, NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM, ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP300/400, AFP-1010, and AM2020). Up to 54 nodes when DVCEM is used in network paging. • Built-in Alarm, Trouble, Security, and Supervisory relays. • VeriFire® Tools online/offline program option.(Make-Notifier)

Supply, Installation,Testing & Commisioning of Power Supply unit NOTIFIER’s AMPS-24/E is an addressable power supply and battery charger with up to three 24 VDC outputs. It operates in either FlashScan® or CLIP (Classic Loop Interface Protocol) mode with the NFS-3030/NFS2-3030 Fire Alarm Control Panel (FACP). It can also be used as the primary power supply for the NCA-2 Network Control Annunciator. battery charger with up to three 24 VDC outputs. It operates in either FlashScan® or CLIP (Classic Loop Interface Protocol) mode with the NFS-3030/NFS2-3030 Fire Alarm Control Panel (FACP). It can also be used as the primary power supply for the NCA-2 Network Control Annunciator.(Make-Notifier)

Supply, Installation,Testing & Commisioning of Repeter Panel The LCD-160 is a 640-character Liquid Crystal Display (LCD) annunciator and remote control for the NOTIFIER NFS-3030/ NFS2-3030 Fire Alarm Control Panel (FACP). The LCD-160 will mimic the top portion (160 characters) of the NFS-3030/ NFS2-3030’s 640-character display. This provides the event and preprogrammed custom messages as displayed on the main panel. The full screen contains soft key functions, and can display other panel information.(Make-Notifier)

Commissioning of communication of LCD-160 Repeater Panel.

UJJWAL MUKHERJEE

TAPAN KUMAR SARKAR