Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹11.7 L
EMD Value
₹14,600
Closing Date
27 Oct 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Staff Officer (Civil), Chandrapur Area
Office of AGM, Chandrapur Area
Providing stage in front of AGM office, Chandrapur Area.
2026_WCL_367004_1
WCL_CHA_civil_2026-27_eT-043
Open Tender
Civil Works - Others
Percentage
90 days
AHQ, Chandrapur Area
As per NIT
3 documents required · 3 mandatory
₹14,600
16 Oct 2026
16 Oct 2026
28 Oct 2026
16 Oct 2026
27 Oct 2026
17 Oct 2026
16 Oct 2026 - 19 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.001 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Nominal concrete 1:3:6 or richer mix (i/c equivalent design
mix) | 6 | cum | 1,914.35 | ₹11,486.1 |
| 1.0019999999999998 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil | 9 | sqm | 26.85 | ₹241.65 |
| 1.003 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 9 | cum | 2,191.15 | ₹19,720.35 |
| 1.004 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | 9 | cum | 6,287.2 | ₹56,584.8 |
| 1.005 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 4 | cum | 6,937.65 | ₹27,750.6 |
| 1.006 | Brick work with fly ash bricks in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand) | 11 | cum | 6,326.39 | ₹69,590.29 |
| 1.007 | Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift | 5 | cum | 153.4 | ₹767 |
| 1.008 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) | 8 | cum | 7,974.6 | ₹63,796.8 |
| 1.009 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | 1,216 | kg | 148.45 | ₹1,80,515.2 |
| 1.01 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 94 | sqm | 591.9 | ₹55,638.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.25 MB
BOQ_380021.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .