REPAIR/REPLACEMENT OF ROOF SHEETS FALSE CEILING WALL PANELLING AND CONNECTED B/R WORK AT MD ACCN AND OTM ACCN OF MH MDC 39 COY ASC AND 119 INF BN (TA) AT SHILLONG UNDER GE SHILLONG

Amount

Dismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling of asbestos cement (corrugated,semicorrugated etc) sheets in roof covering complete all as specified and as directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and as directed.

Dismantling wrought Iron or mild steel work of any description not other wise described complete all as specified and directed.

All as per item No 4 above in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section unframed work complete all as specified and as directed

Dismantling boarding any description fixed in any position with nails complete all as specified and as directed

Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F CGI 0.63 mm thick mild steel sheeting with two corrugations side lap,fixed with coach screws and washers in roofs walls etc with grade of zinc coating 120 gms fixed with l-type or J-type bolts complete all as specified

S&F PGI 0.63 mm thick mild steel sheeting in ridges hips valley gutters drip and straight flashings(length and girth as fixed) with grade of zinc coating 120gms complete all as specified.

M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and as directed

M&L for roof truss (framed) trussed, purlin etc of angle or other section for refixing of sheets and similar works complete of Gde Fe-290 (Gde E-165) complete all as specified and as directed

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote

M&L plain fillets square rectangular or triangular in section clean sawn secured with nails or brads (2nd class hard wood) sectional area exc 13 sqm n exc 25 sqcm complete all as specified and as directed

S&F 20mm thick 2nd class hard wood boarding in eaves board/fascia plained one side with butt joints fixed with nails complete all as specified and as directed

S&F solid PVC wall lining (Wall panelling) consisting of 5mm thick plain colour PVC sheet inclusive solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specifications and drawing complete all as specified and as directed

S&F Anodised Aluminium frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

M&L non asbestos fibre cement building boards of 4mm thick fixed or laid/ inserted to timber frame work fixed in jointless finish with jointing compound and jointing tape as per manufacturer instructions complete all as specified and as specified.

M&L for applying two coats of White wash on ceiling including preparation of new or undecorated surface complete all as specified and as directed

M&L fillets plain or bullnosed , splayed , chamfered , or rounded on one face or edge in section wrought secured with nails or brads (2nd class hard wood) sectional area exc 3 n exc 6 Sqcm all as specified and as directed.

M&L for preparation of new or previously untreated wooden surface of any description n.exc 10 cm width or girth applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and directed

M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and as directed

M&L 40mm thick cement concrete type B-1 1:2:4 using 20 mm graded stone aggregate as in floor complete all specified and directed

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed

Disconnecting existing tanks setting aside (or lowering if required) for repairs , cleaning and removing all scale and dirt etc from tanks and mouths of circulating pipes etc and hoisting if required reconnecting and refixing in positing complete exc 250 and nexc 500 ltrs complete all as specified and as directed

Disconnecting existing tanks setting aside (or lowering if required) for repairs , cleaning and removing all scale and dirt etc from tanks and mouths of circulating pipes etc and hoisting if required reconnecting and refixing in positing complete exc 500 and nexc 1000 ltrs complete all as specified and as directed

M&L for 75 mm thick PCC (1:3:6 ) type C -2 as in Plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15m thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed

Supply only Integral waterproofing compound complete all as specified and as directed

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed

M & L for preparation of new walls surface and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.

M&L for for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.

S&F free standing shower encloser without stablizer glass 8/10 mm thick with chorme finish (size 801-1200 ht 1950 mm of Make Jaquar Cat Part No JSE-CHR-810F0812H19X or equivalent Parryware / Prayag/ Cera).

M&L for preparation of old painted surfaces of CGI Sheet roof of any description of over 10cm width or girth and applying one coat of anti corrosive roof paint complete all as specified and as directed.

R K CONSTRUCTION

M/s Hussain & Bros

M/S Mani Construction

M/S BISWA CONSTRUCTION

M/S. Zoya Construction

M/S GOSWAMI COSTRUCTION

M/s Nishi Kumar Das