REPAIR AND MAINT TO FAN AND GEYSER AND AC AND FREEZER AND WATER COOLER AND REPAIR TO EXTERNAL ELECTRIC SUPPLY DISTRIBUTION NETWORK AT A COY AT BAGRAKOTE STN UNDER GE SEVOKE ROAD

Amount

Taking down ceiling fan, exhaust fan and wall fan from any location and any height, removing fan blades and carried to workshop for repair/rewinding and refixing the same after repair all as directed by EIC. (Note- Cost of repair/rewinding shall be measure and paid separatly under relevant items).

M&L for rewinding of wall mounted fan of size 600mm sweep with super enamelled copper winding wire of appropriate guage for any make or model including replacement of minor part and reassembling, testing complete all as directed.

M&L for rewinding of ceiling fan of size 1200/1400mm sweep with super enamelled copper winding wire of appropriate guage for any make or model including replacement of minor part and reassembling the same complete all as specified and as directed.

M&L for rewinding of exhaust fan of size 300mm sweep with super enamelled copper winding wire of appropriate guage for any make or model including replacement of minor part and reassembling the same complete all as specified and as directed.

M&L for rewinding of exhaust fan of size 450mm sweep with super enamelled copper winding wire of appropriate guage for any make or model including replacement of minor part and reassembling the same complete all as specified and as directed.

Supply only ball bearing No 6201 for ceiling fan all as specified and directed.

Supply only ball bearing No 6304 for exhaust fan/ wall fan all as specified and directed.

Supply only capacitor 2.5 mfd all as specified and directed.

Supply only capacitor 4 mfd complete all as specified and directed.

Supply only canopy (Top & bottom) as per sample for ceiling fan complete all as specified and directed.

Supply only PVC insulated, PVC sheated 3 core copper flexible cable round of 1sqmm all as specified and directed.

M&L Fan down rod made out of GI pipe (Light grade) 15mm bore and 1.20 mtr long including rubber reel and suitable nuts and bolts,sefty pins complete all as specified and directed.

S&F in replacement exhaust fan AC, single phase, 230/240 V, of size 300 mm sweep heavy duty steel/aluminium metal body 1400RPM including with all connecting arrangements complete all as specified and directed.

S&F in replacement exhaust fan AC, single phase, 230/240 V, of size 450 mm sweep heavy duty steel/aluminium metal body 1400RPM including making good the distrubed surfaces with all connecting arrangements complete all as specified and directed.

S&F in repair ventilation fan with louvers, single phase, 230/240 V, of size 200 mm sweep polycarbonate body, rustproof body & blades, low noise and weight, making good the distrubed surfaces with all connecting arrangements complete all as specified and directed.

Taking down geyser of any capacity horizontal or vertical for repair/over hauling/replacement of unserviceable parts and disconnection of electric/ water supply lines and refixing the geyser in serviceable condition after assembling with and including new pin type fastener nut bolts& reconnecting the electric & water supply line including testing complete as specified and directed. (Note-Unserviceable spare parts required to be replaced shall be measured and paid separately as 'Supply only')

Supply only heating element of geyser 1.5/2.0 KW traingular round base shape "ISI marked" .

Supply only heating element of geyser 1.5/2.0 KW any shape "ISI marked" .

Supply only spike type thermostat suitable for old model geyser.

Supply only wire type thermostat suitable for new shape for geyser .

Supply only indicating lamp (Red/Green) any shape for geyser .

S&F in repair 3 pin 15/16A plugtop for 230 volts complete all as specified and directed.

M&L for maintenance and servicing of Solar water heater capacity 300 liters with cleaning of tanks and replacement of unserviceable spare parts as per existing make and model with new one including taking down and removing unserviceable material to store for keeping in safe custody complete all as specified and directed.(Note: Unserviceable spare parts required to be replaced with the new one will be measured and paid seperately under relevant items)

Supply only 3KW Geyser Hot water element.

M&L for cleaning/servicing of complete 1.5/2Tr below mentioned air conditioner unit complete flushing and replacement of unserviceable spare parts complete all as specified and directed. (Note: Unserviceable spare parts required to be replaced with the new one will be measured and paid seperately under relevant items)

Window AC

Split AC

Supply only refrigerrant gas (R-22/R-134 etc) suitable for existing compressor model of AC complete all as specified and as directed.

M&L for attending non working Window/Split AC complaint disassembling components and finding out faulty componenet and then replacing it with new including testing complete all as specified and directed.

Supply only brand new/ old model type PCB card.

Supply only brand new inverter model type PCB card.

Supply only capacitor 50 Mfd

Supply only indoor running motor.

Supply only outdoor fan motor.

Supply only new sealed compressor suitable for 1.5 TR suitable for window/split AC.

Supply only new sealed compressor suitable for 2.0 TR suitable for window/split AC.

Supply only new swing motor.

Supply only temperature sensor.

Supply only compaitble universal remote control.

Supply only outdoor Copper condenser coil.

Supply only indoor cooling condenser unit.

Supply only heat insulated Copper tube 1/4 inch dia.

Supply only heat insulated Copper tube 5/8 inch dia.

Supply only drain cap.

M&L for shifting/reinstalling existing AC complete unit any type in other location including testing complete as directed by Engineer-in-Charge.

M&L for attending non working refrigerator of any type/capacity complaint, disassembling components and finding out faulty component and then replacing it with new complete including testing all as specified and directed. Note: Spare part will be measured and paid saperately under supply only items mentioned below.

Supply only overload relay

Supply only condenser coil

Supply only cooling chamber

Supply only fan motor

Supply only compressor of suitable capacity

Supply only complete filling of refrigarent suitable for existing compressor.

Supply only capacitor 4 Mfd.

M&L for attending non working deep freezer of any capacity .................type/capacity complaint, disassembling components and finding out faulty component and then replacing it with new complete including testing all as specified and directed. Note: Spare part will be measured and paid saperately under supply only items mentioned below.

Supply only overload relay

Supply only outdoor condenser coil

Supply only starting and running capacitor set.

Supply only fan motor

Supply only compressor of suitable capacity

Supply only complete filling of refrigarent suitable for existing compressor.

M&L for attending non working water cooler of any Capacity................. type/capacity complaint, disassembling components and finding out faulty component and then replacing it with new complete including testing all as specified and directed. Note: Spare part will be measured and paid saperately under supply only items mentioned below.

Supply only outdoor Cu condenser coil.

Supply only capacitor 60/80 uFd.

Supply only fan motor.

Supply only compressor of suitable capacity.

Supply only complete filling of refrigarent suitable for existing compressor.

Supply only thermostat of suitable type.

S&F hot/cold water PVC geyser connection pipe of 450mm long all as specified and directed.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose soil getting out and levelling of bottom surface to required level for cable/stay all as directed.

Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.

Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.

Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.

Supply and laying burnt clay sub class B brick as cable protection including taking down old u/s all as specified and directed.

M&L for PCC 1:4:8 Type C2 (using 40 mm graded crushed stone aggregate) for foundation of pole, stay including form work where reqd all as directed.

M&L for PCC 1:3:6 Type C2 (using 40 mm graded crushed stone aggregate) for foundation of pole, stay including form work where reqd all as directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) for coping, grouting, finished even and smooth without using extra cement all as directed.

M & L for laying LT underground Cable, including takingdown existing u/s XLPE insulated, heavy duty armoured 1100 volts grade 16 Sq mm, 4 core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete all as specified.

All as per item No 44 above but 95sqmm, 3.5 core all as specified.

All as per item No 44 above but 50sqmm, 3.5 core all as specified.

All as per item No 44 above but10sqmm, 3.5 core all as specified.

All as per item No 44 above but 06sqmm, 2 core all as specified.

M & L in repair GI tubing 50 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trenches formed by road/PCC cutting/boring as cable protection all as specifed and directed.

M & L in repair GI tubing 25 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trenches formed by road/PCC cutting/boring as cable protection all as specifed and directed.

M&L for boring holes 1mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m. (Note: Connected items like Pipes is measured and paid seperately under relevant items).

Dismantling existing ACSR/earthwire (any size) from over head line complete all as directed by Engr-in-Charge.

Dismantling insulators any type and any size complete all as directed by Engr-in-Charge.

Dismantling of cross arm (made of MS channels/angles etc.) or clamps etc.complete and stacking aside for re-use / replacement all as directed by Engr-in-Charge

Supply and fixing thermoplastic polycarbonate cable junstion box "weather proof, dust proof, acid resistant, shock proof, fire retardent self extinguisher" for outside installation with knockout entry for cable of size 04 - 10 sqmm and minimum 155x210x92mm with terminals, brackets for street light pole mounting and provision of one 6A MCB SP all as specified and as directed.

M&L for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings, complete all as specified and directed.

M&L for replacement of steel tubular swaged poles complete with cast iron base plate, finial taper plug bolts, nuts & screw as specified type 410 SP-31, 9.0 meter long all as specified and directed by Engr-in-Charge.

S & F in repair 5 KW ,three phase automatic Street Light timer switch for automatic switching on/off street light based on lux level of nature light, consisting of sensor overload protection fuse gear, power contactor & MCB of suitable capacity, terminal blocks for cable entry & control unit enclosed in pole/Wall mountable elcosure made out of rust proof, shock proof, termite proof FR grade SMC, conforming to IP 66 with universal lock and key arrangement complete all as specified and as directed by Engr- in- Charge Make: kakatiya energy system Pvt Ltd Cat No. Swadeep 66-02EC-5KW 3P or equivalent in Havells/GE

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2;4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed.

S&F earth continuty conductor or main earthing lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm aluminium strip all as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron strip 25x4mm as earth lead by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SSR part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 32mm dia light grade pipe for protection of GI earth strip etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded stone aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to LT panel board as indicated including testing complete all as specified and as directed.

M/s. STRUCTURES INDIA

SRI SURAJIT SENGUPTA

SHRI JIBANDHAN PAUL

M/S JANARDAN SHARMA AND SONS

M/S AJIT GARAGE

M/S Bikash Saha

M/S NIKITA ENGINEERING CO