SPECIAL REPAIR TO BUILDING NO.P-18 (CERTAIN PORTION) AIRMEN BILLETS AT AFAC COIMBATORE

Amount

Material & Labour for reinforced cement concrete type 1:2:4 B0 (using 12.5 mm graded aggrigate) as in chajja complete all as specified and directed. Note:- Quoted rate for this item and relevant items are deemed to be included for providing scaffolding upto a height of 15 Mtr complete all as specified and directed.

Material & Labour for Formwork to flat chullah hoods, chajja, troughs and similar items including edges and fair finished surface complete all as specified and directed.

Taking down chowkhats or frames with out taking off the shutters from the frames exceeding 1.50 Sqm and not exceeding 4 Sqm each, all as specified and directed

Supply & Fixing 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match, complete all as specified & directed.

Supply & Fixing 100 mm long butt hinges, type C-22 extruded aluminium anodised with brass hinge pin, anodised and fixed and all as specified and directed

Supply & Fixing 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified & directed.

Supply & Fixing 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified & directed.

Supply & Fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified & directed.

Supply & Fixing 150 mm extruded aluminium alloy handles, fabricated type anodised, complete all as specified & directed.

Supply and fix in repairs for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Material & Labour in repairs stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified & directed.

Supply & Fixing in repairs 100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified & directed.

Supply & Fixing in repairs 100 mm extruded aluminium alloy handles, fabricated type anodised as specified and directed

Supply & Fixing 100mm extruded brass handles, fabricated type polished Complete all as specified and directed

Supply & Fixing 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

Supply & Fixing Ball catches with 8 mm dia steel ball and brass body and striking plate including letting in all as specified and directed

Supply & Fixing in repairs continous (piano) hinges mild steel bright finish or electrogalvanised 30 mm wide(width of flab(when open) all as specified and directed

Material & Labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumn, hooking ends and binding with and including mild steel wire (annealed) 0.9mm dia or securing with clips complete all as specified and directed.

Material & Labour for Pressed steel frames of size size of frame 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified & directed.

Material & Labour for Framed work using mild steel having grade of GDE Fe- 410W (Gde E-250) Quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Material & Labour for 18/19mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc, complete all as specified & directed.

Material & Labour for Rendering in CM 1:3, 5mm thick on fair faces of brick work or concrete surfaces on ceiling complete all as specified.

Material & Labour for preparation of newly plastered surfaces and applying three coats of white wash on ceiling surface, complete all as specified & directed.

Material & Labour for 15 mm thick Rendering in cement mortar 1:4, on othe than fair faces of brick work or concrete surfaces, mixed with WPC all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only Intergral waterproofing compound, complete all as specified & directed.

Material & Labour for applying two coats of cement base paint over primer on newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

Material & Labour for 10mm thick Rendering in cement mortar 1:6, on fair faces of brick work or concrete surfaces, all as specified and directed.

Material & Labour for prepation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer over 3mm thick wall care putty on wall, all as specified and as directed .

Material and labour for complete removal of existing treatment from old wall surfaces and finishing walls with Acrylic Smooth exterior paint of required shade over priming coat of exterior primer all as specified and directed. (Note - Scafolding for Height of bldg upto 15 mtrs is included in quoted rates)

Material & Labour for Complete removal of existing treatment on old surfaces of wall and applying two coats of distemper oil-emulsion over a coat of primer on wall all as specified and as directed .

Material & Labour for Complete removal of existing treatment on old treated surfaces of ceiling and applying two coats of white wash on ceiling surface, all as specified and as directed.

Material and labour for preparation of old wood & wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Material and labour for preparation of old steel surface over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed

Material & Labour for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces all as specified and directed.

Supply & Fixing Sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane,

Supply & Fixing Figured glass, pin head type, 4 mm thick and glazing with oil putty in square not exceeding 0.5 Sqm in each pane all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed

Demolition of reinforced cement concrete in other than ground floors landings, chajjas and similar work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Supply & Fixing 4 mm dia Stainless Steel Wire (SS304) (100% Rust Proof) fixing to concrete/Stone masonry / Steel angles including securing /fixing, complete all as specified and directed

Supply & Fixing Stainless Steel Expansion Concrete Wall Anchors Eyebolt Screw, heavy Duty 304 Stainless Steel Shoulder Lag Eyebolts fo hooks for fixing of SS 4mm wire in concrete/ stone masonry by drilling and securing for holding wire complete all as specified and directed.

Supply & Fixing 25 mm dia Stainless Steel drapery rod , including brackets, decorative knobs at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed.

Removal of Plants/ Shrubs grown on walls/ slabs / beams by making holes or demolition of concrete etc and including applying suitable chemical for killing the roots of Plants, filling of holes with concrete and making good complete all as specified and directed.

Chipping/removing loose concrete in cloumns/beams/ chajjas/roof slab etc. up to reinforcement bars without damaging the reinforcement, removing all the loose material and to make all the exposed surface free from dust and all impurities etc complete all specified and directed.

Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution Reebaklens RR of Fosroc / Sika Rust off 100 / equivalent in bostic India Ltd by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying anti corrosive coating to reinforcement Nitozinc primer of Fosroc/Sika Friazinc R / equivalent in Bostic india Ltd , all as recommended by product manufacturer.

Material & Labour for providing additional reinforcement by welding or by any established methods to increase the strength of RCC as directed. (Note:- Making and filling of holes for anchoring rods will be measured and paid separately)

Material & Labour for Providing and applying one coat of structural grade epoxy coat by brush of approved make . Mixing of two components will be as directed by manufacturer .Application shall be provided not more than 5 hours before application of micro concrete/polymer mortar etc complete all as specified by the manufacturer. (Make:- Nitobond EP of FOSROCK/ Sikdur 32LP/ equivalent in Bostic India Ltd)

Material & Labour for Providing and applying n exc 40 mm thick (In layers of each 10mm thick) Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar Renderoc SP 40 of Fosroc / Sika plastocrete plus/ equivalent in bostic India ltd, mixed with water in a water & powder ratio 0.18 in ceiling of roof slab/Chajjas/Beams/Parapet walls etc (Note:- Quoted tate is deemed to be inclusive of provideing scaffolding for working in patches upto a height of 15 Mtr complete all as specified and directed)

Taking down existing APP membrane etc top of roof slab and cleaning with wire brushe and washing with water complete , including removal and dispose off the debris all as specified and directed.

Supply and application of single component, seamless, spray applied, hybrid elastomeric PU based material i.e Nitoproof 725 of Fosroc chemicals (or) sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE over a coat of primer i.e Nitoproof WB primer of Fosroc chemicals (or) diluted sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE, work in patches of min 1 Sqm all as specified and directed.

Material & Labour for Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in cement 1:4 mixed with water proofing compound and jointed pointed in cement mortar 1:3 mixed with 5% crude oil by weight of cement after taking out existing damaged tiles in patches not exceeding 2 Sqm all as specified and directed.

Material & Labour for 25mm thick Cement concrete 1:2:4 type B0 (12.5mm graded aggregate) for sub base of floors complete all as specified and directed.

Material & Labour for 15 mm thick Screed bed or bedding layer of mortor in cement mortar 1:4 for laying floor finishes all as specified and directed.

Material & Labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and directed.

Material & Labour for 75 mm thick cement concrete 1:3:6 type C-2 (40mm graded aggregate) in plinth protection, all as specified and directed.

Supply & Fixing in repair PVC (SWR) pipe 110mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) bends 110mm radius complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) pipe 75 mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) bends 75mm radius complete all as specified and directed.

Disconnecting existings PVC water tank capacity exc 500 ltr and n exc 1000 ltr, setting a side (or lowering if required) for repairs, claening, etc. and hoisting if required reconnecting and refixing in position. (Note - Cleaning repairings, etc. measured seperately).

Dismantling water tanks and removing to store / considering under sch of credit , capacity in litres exceeding 500 Ltr but not exceeding 1000 Ltr capacity, all as specified and directed.

Supply & Fixing 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, all as specified and directed.

Supply & Fixing Unplasticised PVC of 25mm dia pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type, complete all as specified.

Supply & FixingUnplasticised PVC of 20mm dia pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type, complete all as specified.

Supply & Fixing Tank Adaptor for CPVC pipe outer dia 25 mm, all as specified and directed.

Supply & Fixing union for CPVC pipe outer dia 20 mm, all as specified and directed.

Supply & Fixing union for CPVC pipe outer dia 25 mm, all as specified and directed.

Demolition of Cement concrete (unreinforced) Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), all as specified and directed.

Removal of debris/building material out side the campus including loading and unloading, etc to a distance exceeding 5Km but not exceeding 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement.

Taking down old copper/aluminium point wiring (light, fan, socket or power) complete, including fitting and fixtures such as switches, sockets, ceiling roses, pendants, regulators, sockets, light fittings, DB, MCBs etc.removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, all as specified and directed.

Taking down old submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces, all as specified and directed.

Taking down Ceiling Fan of any type any sweep from the ceiling and refixing the same after painting in situ with synthetic enemel paint by spraying including filling cavities with filler, one coat after clening all dust including electrical connection, all as specified and directed.

Taking down old Exhaust fan,cealing cable end, dismantling blades and refixing the same after painting in situ with synthetic enemel paint by spraying including filling cavities with filler, one coat after clening all dust including electrical connection complete all as specified and directed.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic PVC conduit with all accessories concealed conduit and including provision of 1.5 Sqmm single core PVC insulated FR cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor,and modular metel flush box with cover for housing the switches for one light point controlled by one, one way switch all as specified and as directed.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic PVC conduit with all accessories concealed conduit and including provision of 1.5 Sqmm single core PVC insulated FR cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor,and modular metel flush box with cover for housing the switches one Exhaust/Fan point controlled by one switch all as specified and as directed.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic PVC conduit with all accessories concealed conduit and including provision of 1.5 Sqmm single core PVC insulated FR cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor,and modular metel flush box with cover for housing the switches one switch socket outlet point controlled by 5 Amps switch on independent board all as specified and as directed.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic PVC conduit with all accessories concealed conduit and including provision of 1.5 Sqmm single core PVC insulated FR cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor,and modular metel flush box with cover for housing the switches one switch socket outlet point 5 amps on same board, all as specified and as directed.

Point wiring complete with 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic PVC conduit with all accessories concealed conduit and including provision of 4 Sqmm single core PVC insulated FR cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor,and modular metel flush box with cover for housing the switches for one 3 pin socket outlet, 15 Amps on independent board, all as specified and as directed.

supply and fix LED mirror light 10 watt, complete all as specified and as directed.

supply and fix LED hanging tube light fitting 36 watt complete with LED PC tubes with all as per Cat no CONSTA1144LP40WLED857SPCWH of make - Havells (or equivalent in other makes) and including hanging aluminium string etc complete all as specified and as directed.

Supply and fix triple pole and neutral enclosure 415 volts with a three pin and Earth plug and socket complete with one triple pole MCB 20 amps, all as specified and as directed.

supply and fix sheet metal and encloser with distribution board vertical (DB) TPN, 415 volts, having IP: 43 protection,isolated neutral bar, insulated bus bar assembly,door earthing arrangement, mechanical impact strength 1k08, 04 way compact double door suitable for fixing MCBs TPN as in commer and out going complete

supply and fix MCB DB, SPN, 8 ways, isolated neutral bar with double door IP54 protection door earthing arrangement with cement spill protector mechanical impact strength IK09 complete all as specified and as directed.

supply and fix 4 pole MCCB100 amp 1,50 Hz 415 Volt with rupturng capacity 16 KA, all as per Cat No - 830052 of Make - Indonesian (or equivalent in other makes) complete all as specified and directed.

supply and fix MCB TPN 63 Amp, 240 volts,10KA, 'C' curve all as per Cat Part Number 811220 of Make - Indonesian (or equivalent in other makes) complete all as specified and directed.

supply and fix MCB TP 16 Amps, 240 v 10ka,'C' curve all as per Cat Part No 811192 make -Indonesian (or equivalent in other makes) complete all as specified and directed.

supply and fix MCB sp 6 to 32 Amps, 240 v ,10ka, 'C' curve all as per Cat Part No. 811152 of Make - Indonesian (or equivalent in other makes) complete all as specified and directed.

supply and fix MCB spn 40 Amps, 240 v ,10ka, 'C' curve Cat Part No. 811152 of Make - Indonesian (or equivalent in other makes) complete all as specified and directed.

supply and fix ceiling Rose surface type bakelite 65x50 mm with three terminals, complete all as specified and as directed.

Supply and fix modular fan regulator step type 120 W,2 model complete all as specified and as directed.

Sub main wiring complete with 4 runs of 6 Sqmm single core PVC insulated FR cable 1100 volts grade multistranded copper conductor cable with two run of 4 Sqmm single core PVC insulated FR cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories in concealed conduit all as specified and as directed. (Note - 4 runs of 6 Sqmm + two run of 4 Sqmm + PVC conduit shall be measured as one unit)

Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated FR cable 1100 volts grade multistranded copper conductor cable with one run of 4 Sqmm single core PVC insulated FR cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories in concealed conduit all as specified and as directed. (Note - 2 runs of 6 Sqmm + 1 run of 4 Sqmm + PVC conduit shall be measured as one unit)

Supply and fix Switch Modular 6A single pole, one way, 1 module, complete all as specified and as directed.

Supply and fix Switch Modular 16A single pole, one way, 1 module, complete all as specified and as directed.

Supply and fix Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed.

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed.

Supply and fix Modular White cover plate with frame, 2 module, complete all as specified and as directed.

Supply and fix Modular White cover plate with frame, 3 module, complete all as specified and as directed.

Supply and fix Modular White cover plate with frame, 4 module, complete all as specified and as directed.

Supply and fix Modular Metal flush box 1/2 module, complete all as specified and as directed.

Supply and fix Modular Metal flush box 3 module, complete all as specified and as directed.

Supply and fix Modular Metal flush box 4 module, complete all as specified and as directed.

Supply and fix Ceiling rose, 3 phase / PVC / polycarbonate, isolated body, complete all as specified and as directed.

Supply and fix LED tube lilght fitting 1x 20W , 220 V incld LED tube light 18 retro bar professional WH 6500K etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old fittings, complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009, complete all as specified and as directed. (Note - The unit rate includes earthing wire, and protection pipe upto 7.5 metre)

Cutting chases, pinning in, making good to facings where required and pointing in cement motor 1:3 to ends or edge of landings, steps, cillls sunset sleeves lintels, etc and cutting changes for concrete water tubing or concealed conduit wiring etc and making goods cutting not exceed 10 cm girth, complete all as specified and as directed.

Supply and fix air desk light, 5 watt,Air-light minimalistic Design, perfect table lamp for study and office use, complete all as specified and as directed.

VIJAYA ENTERPRISES (BID ID -3467527)

SEMBA ELECTRICALS (BID ID -3465612)

UNIQUE INDIA CONSTRUCTIONS (BID ID -3467436)

P JAYAPATHY & C0 (BID ID -3467079)

RISHAN INFRA ENTERPRISES (BID ID -3466781)