AGE I CGN 27 22 23 PROVN OF TOILET BLOCK NEAR RELIGIOUS HALL AT SECTOR 62 NOIDA.

Amount

Suarface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts well cesspits manholes pier holed etc 10 Sqm on plan and getting out in soft /loose soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil complete all as specified and directed.

Excavating over areas, exc1.5 m deep but n exc 3.0m deep and getting out in soft /loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40 mm graded aggregate in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) ( using 20 mm graded stone aggregate ) as in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc basement slabs complete all as specified and directed.

M&L for RCC M-25 Design Mix concrete (using 20mm graded aggregatet) as in columns, pillars, piers, post and struts complete all as specified and directed.

M&L for RCC M-25( Design Mix) concrete (using 20mm graded aggregatet) as bends, lintels over 1.50 m span etc complete all as specified and directed.

M&L for RCC M-25( Design Mix) concrete (using 20mm graded aggregatet) as in shelves /slabs supported on walls, beam and columns,in floors ,roof, landings ,balconies, slabs in helves and the like complete all as specified and directed.

M&L for form work to sides of concrete foundations ,footings bases of coloumns,raft and raft beams sides and soffits of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

M&L for formwork sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels,bends, cantilivers,shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed.

M&L for form work to siffits of suspended slabs such as roof slabs, shelves, floor slabs,landings and similar work, not exe 200mm thick (horizontal or sloping) for fair finish surface complete all as specified and directed.

M&L for form work to sides of columns, pillars,posts etc and stanchion with rough finished surface of concrete complete all as specified and directed.

S&F for mild steel bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 14 above 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders but in stirupps complete all as specified and directed.

M&L for old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

M&L for old size Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cm (1:4) complete all as specified and directed.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushesand water to expose the stone chippings complete all as specified and directed. Note: Grooves shall be measured separately.

M&L rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for broken stone hard core of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, floors and pavings etc. complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in floor to receive floor finishes etc. all as specified.

M&L for Non skid ceramic coloured joint free tiles 400mm x 400mm 7to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:4) laying floor finish complete all as specified and directed.

M&L for Glazed ceramic dak shade glossy tiles coloured of size 300mm x400mmx7mm th on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including cement screed bed 10mm thick in cement mortar (1:4) complete all as specified and directed complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection and similar works 75mm thick finished fair and smooth without using extra cement including necessary form work complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F figured glass, pin head type 4mm thick, ordinary quaility, not exceeding 0.5 Sqm in each pane and glazed with oil putty in square complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be measured separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Stainless steel butt hinges and necessary SS screws shall be measured separately)

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

S&F aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 150 mm long all as specified and directed.

S&F aluminium handle extruded fabricated type anodised of size 150 mm all as specified and directed.

S&F for SS butt hinges 100mm complete all as specified and directed.

S&F Iris Mirror-White 900x 800 mm fixed with brass screws and cup washers all as specified and directed by Engr in charge.(Make Parryware C846K46 or equivalent).

S&F white verve Wall Hung WC of size 665 x 360 x 730mm, flush Cistern including Soft Close (including Jet spray), Hinges, Fixing accessories Set and S Trap-300mm. (Make Parryware C0269 & C0762 or equivalent)

S&F in floor stainless steel gratings of 125mm dia complete all as specified and directed.

S&F urinal of size of 380 x 405 x 590mm white , with grating and union for discharge pipe including flushing system, flush pipe & waste pipe) all as specified & directed. (Make Parryware C0575 or equivalent)

S&F wash hand basin counter Top, white, flat back of size 550 x 450 x 200mm, including cutting & 15mm bore CP pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as specified and directed. (Make Parryware C0431 or equivalent).

S&F 100mm cast iron sanitary connection socket to fit WC outlet complete all as specified and directed.

S&F 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed by Eng-in-charge.

S&F 15mm bore fancy type CP bib taps cost copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe complete all as specified and directed.

S&F 15 mm bore CP stop/angle valve cost copper alloy screwed down, high pressure with crutch or butterfly handle fancy type complete all as specified and directed.

S&F for Rotational moulded polythylene 1000 liters capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wallls/floor complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed.

S&F PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F for CPVC pipe SDR-11 ,16MM bore with plain SDR-11 Fittings complete to wall and celing or laid floors or concealed & joiny only with CPVC solvent cement only (Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc) , complete all as specified and directed.

S&F for CPVC pipe SDR-11 ,20MM bore with plain SDR-11 Fittings complete to wall and celing or laid floors or concealed joiny only with CPVC solvent cement only (Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc), complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for pipes of 150 mm bore.

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in coping , benching, haunching including all necessary form work complete all as specified and directed.

M & L for Precact cement concrete 1:2:4 type B1 (using 20mm graded granite stone aggregate ) in landings, cover slabs ( for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

M & L for old size Brickwork with fly ash bricks in one brick thick honey-comb walling, built in, built in cm 1:4 complete all as specified and directed.

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed.

S&F 15 mm size PVC connection with PTMT nuts of 600 mm long complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 15 mm thick screed bed in cm 1:4 complete all as specified and directed.

S&F Paper holder with cover including all accessories as directed by Engr-in-charge. (Make Parryware T6514A1or equivalent) .

S&F Corner Glass Shelf including all accessories as directed by Engr-in-charge. (Make Parryware T6704A1 or equivalent).

S&F Towel Rack 40mm including all Accessories as directed by Engr-in-charge. (Make Parryware T6709A1 or equivalent) .

S&F health faucets Cardiff with SS Hose & Hook (Brass) including all accessories as directed by Engr-in-charge. (Make parryware No T9941A1 or equivalent)

M&L for broken brick filling in the soak well gauge n exc 63 mm complete all as specified and directed.

S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S & F CU (Corner unit ) Toilet block cubical made of HPL 12.00 mm Thick boards of colour of textured surface as approved by Engr-in-Charge of size 1700x1200x1995mm ,door size of 600x1785mm with 150mm groun clearance incl necessary hardware (aluminium U/F channel, Aluminium top rail, stainless steel gravity hinges, alloy privacy tumb-turn with indictor ,SS coat hook cum door stopper, SS door knob , SS adjutable foot , Polyamide top rail end cap and aluminium door stopper channel etc ) complete all as specified and directed by Engr in charge (Make Greenlam model Classique Versatile ) or S & F EU (Enclosed unit) Toilet block cubic made of HPL 12.0mm thick boards of colour or textured surface as approved by Engr-in- Charge of size 2500x1200x1995mm ,door size of 600x1785mm with 150mm ground clearance incl necessary hardware ( aluminium U/F channel, aluminium top rail, stainless steel gravity hinges, alloy privacy tumb -turn with indictor, SS coat hook cum door stopper, SS door knob, SS adjutabe foot, polyaide top rail end cap and aluminium door stopper channel etc) complete all as specified and directed by Engr in charge (Make Greenlam Model Classique Versatile or equivalent)

S&F overhead shower with arm any colour ,125mm long with bend of 45 degree with flange complete all as specified and directed. (Make Parryware T9809A1 or equivalent)

S & F Cast copper alloy chromium plate bottle trap fixed to WHB and wall complete as per Engr-in-Charge.((Make Parryware T3202A1or equivalent

S & F basin mix cast copper alloy ,chromium plated fixed to 15mm dia MS pipe complete all as specified and directed by Engr-in-Charge. (Make Parryware T4014A1 or equivalent)

S&F 15 mm size PVC connection with PTMT nuts of 450 mm long.

Rounding to edges of stone slab one edge, such as steps, cooking platform and other similar situations and rubbing and polishing complete all as specified and directed.

M&L for water proofing treatment to RCC roof slab incl parapet as under (a) Applying bituminious primer conforming IS 3384 1965 @ 0.50 Kg/Sqm over cleaned and dry roof surface incl parapet. (b) Applying hot blown grade 85/25 bitumen as per IS 702-1988 A 1.2 Kg/Sqm applied over primer. (c) Laying one layer of APP based polymeric membrane, 3mm thick, weight not less than 3.6 Kg/Sqm reinforced with non woven polyster fiber reinforced (wight not less than 150gm/Sqm) sealed by torch application with a minimum overlap of 100mm and 75mm at end and side of polymeric membrane (d) Alayer of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm over APP. all as specified and as directed by Engr-in-charge.

M&L for sand cushioning for UG cables using dry river sand; gently punning down all as directed and specified. Note : For measurement purpose punned thickness shall be considered

Supplying & laying un-reinforced pre cast concrete cable covers CLASS LV type I, flat size size 250 mm x 150mm x 40mm to be laid transverse to cable complete all as specified and directed.

Supply Laying and jointing,LT under ground cable ,1100 volts grade,XLPE insulated,armoured with galvanised round steel wire or steel strip,electric power cables heavy duty,with multi stranded aluminium conductor,laid in trenches,ducts,fixed on poles/walls with proper size saddles and clamp laid under roads/path/drain/culverts or encored in GI pipe fixed & testing and commissioning complete all as specified of Size 10 Sqmm 2 core.

Supply and laying in trenches/fixed on pole with necessary clamps, nut, bolts etc GI pipe 40 mm dia light grade including necessary fittings as protection to Cable complete all as specified and as directed.

Cutting to existing GI pipe line upto 50 mm dia for taking connection up to 40 mm dia GI pipe including insertion of CI /GITee complete all as specified and directed including Exc & earth Work

Supply and lay in trenches/or on wall 25mm bore medium grade steel water tubing galvanised with all fittings and joints etc complete all as specified and directed.

Supply and fix gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for for 25 mm bore.

Material and labour for Point wiring for one light/fan controlled by, one way switch complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 voltsgrade confirming to IS-694 drawn through and including non metallic rigid PVC heavy duty concealed conduit minimum 20 mm dia,but shall be increased as per actual site requirement in accordance with clause No.19.125 of SSR Part-I ,with necessary accessories with Flush mounting boxes & white plates with frames housing of switches sockets / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge for;- (Note :- The cost of Modular mounting boxes and modular plates deemed to be included in the quoted rates) Make : (i) Flush mounting boxes Cat Part Module 18 from model No 6890-07 to 6890-12 of legrand or equivalent in havells, SIEMENS. (ii) White Plates : upto 18 module from No Mylanic series model No 6755 61 to 6755 78 of Legrand or equivalent in Havells / Siemens / Crabtree

All as per item No 81 here-in-before but with 4 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

S & F 6 A one-way modular switch - 1 module complete all as specified and directed Make Legard Cat No: 6755 01 or equvalent in Simens / Crabtree

S & F 16 A one-way modular switch - 1 module complete all as specified and directed Make Legard Cat No: 6755 11 or equvalent in Simens / Crabtree

S & F 6/16 A socket 2/3 Pin combined 2 modules module complete all as specified and directed Make Legard Cat No: 6734 55 or equvalent in Simens / Crabtree.

S&F modular blank plate module 1 all as specified and directed

S&F ceiling rose surface bakelite 65mm x 50mm three terminal all as specified and directed

S & F double door Sheet metal enclosures factory made DBs SPN 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 10 or equivalent in Simens/ Hager/ L & T

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

SP 6 To 32 AMP

SPN 40 to 63 AMP

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate at a depth not less than 1.5 mtr below ground level, connected to and including galvanised earth lead wire 4mm dia as earth lead up to 7.5 mtr length by means of bolts, nuts check nuts and washers etc. of galvanised iron or steel all as shown in electrical plate No. 3 including provn of GI protection pipe light grade of 32mm bore upto 7.5m length and connecting earth strip to earthing test point all as shown in electrical plate No. 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (rein forced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm connecting with 3 core flexible copper cable of size 1.5 Sqmm all as directed. Make- CG/Havells/ Orient