Making partitions and creation of 3 No wash room facility for female staff at Drug and Pharmacy (Central Store) block including collapsible shutters and grill work at SKIMS Soura.

Amount

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)

Powder coated aluminum (minimum thickness of powder coated 50 microns) for fixed portions(Frames)

Powder coated aluminum (minimum thickness of powder coated 50 microns) for shutters

P/F of 5.0 mm thick A.C.P sheets of approved make

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) (With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

P/F of Hydraulic door closer of approved make(superior type)

P/F of Hardware Fittings(Standard Quality)

Almunium Handle 8”

Aluminum Handle 4”/5”

Aluminum Tower Bolt 6”

Aluminum Tower Bolt 4”/5”

Stainless Steel Hinges 4”

Stainless Steel Hinges 3”

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: (In cement mortar)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :(Of area of 3 sqm. and below)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : (Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriage.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

Labour charges for fixing of available frames and shutters

15mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): (First class deodar wood)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.( With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws) (35 mm)

p/f of 3 mm thick Aluminum sheet of approved make.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (2 mm thick)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Size of tile 600x600 mm)

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels,Granite of any colorandshade. ((Area of slab over 0.5 sqm)) (18 mm)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in\ skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

p/f of Orissa pattern white W.C size 580*440(Cera,Hindware or equivalent)

P/f of PVC (10 Lit.) Cistern of approved make(Cera,Hindware or equivalent)

p/f of wash basin size(550*400) of standard quality.

p/f of G.I long bend of approved make

p/f of PVC pipe of approved make(B-type) along with fittings like Collar,D/bend,D-junction,Reducer etc.complete.

P-Trap 100 mm

P/F OF C.P FITTINGS)OF APPROVED MAKE)

Bib Cock(Jaquar or equivalent)

Angle Valve

Pillor cock

Basin mixer

Wall mixer

C.P Flexible Tubes

PVC Connectors

C.P waste

p/f of 450*600 Ornamental looking mirror(Superior Type).

Making khurra’s in masonary/concrete walls and making good the same including cost of scaffolding for washroom disposed pipes.etc. complete

Construction of 0.90m*0.90m*0.45m(external size) mainhole of brick masonary walls in 1:4 mix on solid surface with mud mate of 3”(1:4:8 Cement concrete) inside plastered in 1:4 mix ,finishing floors with cement concrete 1:2:4 mix with floating cost of cement including R.C.Ccover in 1:1 ½:3 mix with reinforced o f10mm dia both ways including excavation and refilling of trenches( complete job)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ( Welded)

p/f of M.S Mesh wire dia=3mm( mesh size 25*25 ) to be welded including a cost of red oxide steel primer.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (Two or more coats on new work) on steel work

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

Internal work(concealed) PN-16 pipe(20 mm OD(SDR-7.4)

Internal make(Exposed) PN-16 pipe(25 mm OD(SDR-7.4)

PPR unions 20 mm

PPR unions 25mm

TEHSEEN CONSTRUCTIONS PVT. LTD.

M/S AL-ARZ CONSTRUCTIONS

M/S M.I.CONSTRUCTION

NAZIR AHMAD HAKAK

JAVAID AHMAD MIR