PERIODICAL SERVICES TO CERTAIN BLDG AT MH ECHS MDC STN HQ CAMPUS STN OFFR MESS MES OFFICE AND OTHER AREA AND REPAIR REPLACEMENT TO FLOOR KITCHEN SUNKEN JOINERY CERTAIN BR WORKS IN JCO OR MD ACCN IN THE AREA OF AGE BR II UNDER GE MAINT INF SCHOOL MHOW

Amount

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down complete all as specified and directed. Note:Taking Down Plaster is to be carried out upto 15.00m height in Chhajja Bottom and Walls.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site.

M&L for rendering 15 mm thick in CM ( 1:6 ) on fair faces of wall/ concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 mixed with WPC @200ml per bag pf cement on fair faces of Brick wall/concrete surface like chhajja Bottom etc and finished even and smooth without using extra cement complete all as specified and as directed. Note:-(i) The work shall be carried out on buildings upto 15.00m height. The contractor is advised to visit the site before quoting the tender. The quoted rate shall be inclusive of all necessary scaffolding, lifting arrangement and safety devices as required. (ii) WPC shall be measured and paid seperately.

M&L for 10 mm thick plaster on ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for preparation of newly plaster surface of wall and and applying 2 mm thick cement base wall care putty in two coats on walls and surface finished even and smooth with sand paper complete all as specified and directed.

M&L for applying 2mm thick white cement base wall care putty in two coats (each coat not less than 1mm) on walls and surface finished even and smooth with sand paper complete all as specified and directed

M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of oil bound distemper make the surface smooth using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge Note:- (i) The old surface shall be prepared in such a manner that no dents, impressions, or surface irregularities remain visible. The surface must be made even and smooth in strict accordance with the manufacturer’s instructions before the application of distemper. The cost of all materials, labour, and tools and plants (T&P) required for surface preparation and painting shall be deemed to be included in the quoted rates. (ii) The work shall be executed through an authorised applicator of the manufacturer, after the contractor concludes a Memorandum of Understanding (MoU) with the manufacturer to ensure a company-backed guarantee. The authorised applicator proposed by the contractor shall be approved by the GE/AGE prior to commencement of the work. (iii) All materials required to be incorporated in the work shall be brought to the MES store yard by the contractor. These materials will then be issued by the department for use in the work, to ensure that the quantity consumed is in accordance with the manufacturer’s recommendations. (iv) After completion of surface preparation, the same shall be got approved from GE/AGE for each building prior to the application of distemper. (v) The colour and shade of the paint shall be as approved by the GE/AGE. (vi) The work shall be carried out on buildings upto 15.00m height. The quoted rate shall be inclusive of all necessary scaffolding work and safety devices as required. (vii) Putty shall be measured separately

M&L for preparation of plastered/Putty surfaces of walls and applying two coats exterior weather proof water base emulsion paint white/coloured over over a coat of primer same make base all as specified and directed. Note: Primer shall be measured and pair separately.

M&L for preparation of plastered/Putty surfaces of walls and applying two coat of Ist quality interior plastic imulsion paint white/coloured over prepared surface of wall with putty complete all as specified and directed.

M&L for preparing new surfaces of wall and applying three coats of white wash on ceiling and cornices complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and one coat of white wash on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coat of 1st quality oil emulsion distemper white/coloured all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of first quality oil emulsion distemper complete all as specified and directed.

M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying first quality two coats of synthetic enamel paint complete all as directed and specified.

M&L for preparation of old painted surfaces of steel/steel based materials exc 10cm width or girth and applying 1st quality two coats of synthetic enamel paint complete all as specified and directed.

M&L for applying primer of same make(as of exterior weather proof water base emulsion paint ) on white cement based putty complete all as specified and directed. Note:- (i) The work shall be carried out on buildings upto 15.00m height. The contractor is advised to visit the site before quoting the tender. The quoted rate shall be inclusive of all necessary scaffolding, lifting arrangement and safety devices as required. (ii) Putty shall be measured and paid seperately.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic weather proof emulsion paint (wallmista of Berger paint or equivalent in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface shall be prepared in such a manner that no dents, impressions, or surface irregularities remain visible. The surface must be made even and smooth in strict accordance with the manufacturer’s instructions before the application of distemper. The cost of all materials, labour, and tools and plants (T&P) required for surface preparation and painting shall be deemed to be included in the quoted rates. (ii) The work shall be executed through an authorised applicator of the manufacturer, after the contractor concludes a Memorandum of Understanding (MoU) with the manufacturer to ensure a company-backed guarantee. The authorised applicator proposed by the contractor shall be approved by the GE/AGE prior to commencement of the work. (iii) All materials required to be incorporated in the work shall be brought to the MES store yard by the contractor. These materials will then be issued by the department for use in the work, to ensure that the quantity consumed is in accordance with the manufacturer’s recommendations. (iv) After completion of surface preparation, the same shall be got approved from GE/AGE for each building prior to the application of distemper. (v) The colour and shade of the paint shall be as approved by the GE/AGE. (vi) The work shall be carried out on buildings upto 15.00m height. The quoted rate shall be inclusive of all necessary scaffolding work and safety devices as required.

M&L for preparation of old decorated surfaces of wall/roof including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured on Terracota Tiles as specified and as directed. Note:(i) Painting is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc require for the dismantling of false ceiling.

M&L for preparation of old decorated surfaces of wall/roof including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying Two coat of exterior weather proof water base emulsion paint white/coloured on Terracota Tiles complete all as specified and as directed. Note: Painting is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc require for the dismantling of false ceiling.

M&L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling with white cement base putty and applying one coat of 1st quality interior plastic emulsion paint white/coloured complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by filling with white cement base putty and applying two coat of 1st quality interior plastic emulsion paint white/coloured complete all as specified and directed by Engr-in-Charge.

M&L french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old surface with one or more coats complete all as specified and directed.

M&L for applying interior and exterior series of Asian Royale play textured wall paint over prepared surface of wall with white cement base 2 mm thick putty and design approved by Engineer-in-Charge complete all as specified and directed.

M&L for writing letters or figures (Block. Roman. Italic or Indian) to building with synthetic enamel paint 65mm long and 10mm wide in words and figures such as (SM-1,P-27,T-123&T-81/2 etc)over black synthetic enamel painted ground of 150mm dia incl obliterating old writting of any description description n exc 0.10 sqm with paint to match existing work complete all as specified and as directed. Note- considering SM-1=P-27=P-123=T-81/2 no as unit complete all as specified and directed.

M&L for preparation of old plaster surfaces to external wall by providing water proofing treatment to applying one base coat of Raincoat White (Dr FIXIT) over a coat of Prime Seal primer (Dr FIXIT) including plastering if required and making the surface fit for application of exterior waether proof water base emulsion paint complete all as directed and specified. Note:Treatment is to be carried out upto 15.00m height over Chhajja/Wall/Roof .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site.

Hacking out old broken glasses of any thickness size & quality from wooden or steel window glazed with putty or fixed with beads including punching or drilling out old glazing pins/clips etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm each complete all as specified and directed.

S&F in reapir galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apparature 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Cleaning of roof slab/chajja with sweeping with brooms, removing all depositions /mud/ vegetations etc and removing the spoil to a distance nexc 50mtr all as directed by the Engineer-in-Charge.

Remoing all Tree/Shrub from wall surface by completely uprooting the same by dismantlng of brick work or concrete surface(if required) including making good in CM 1:4 and finished with existing finishes complete all as specified and directed. Note: Removing of tree/Shrub is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site.

M&L for preparation of old concreate/PCC tile surfaces by brooming with coir/wire brushes and wahsing down with water to remove the fine dust and applying two coats of Lacquer polish (1001) chemical with pigment as approved by GE complete all as specified and directed.

Checking and repair to plumbing items consist of checking and repair to leakages in bib taps/ mixer taps/ stop cocks/ angle valves/ flushing cisterns/ waste pipe/ GI pipes etc including removal of air lock, blockage of water in GI tubing , cleaning the pipe or fittings all connected plumbing works etc complete all as specified and as directed. Note : The cost of minor items like nail/ hooks/ nut bolts/ screw/ hexa blades/ washers/ plugs/ grease, safeda, thread (soot)/ 'M' seal, flush handle, censor cell/ check nuts/ adhesive, white cement e.t.c shall be deemed to be inclusive in the quoted rates only

S&F in repairs stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repairs pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore Bib taps, Fancy types chromium plated cast copper alloy with capasten head screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F in repairs stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge. Note:- Size of plate rack should not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repairs vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed.

S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs CP health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed.

S&F in repairs flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F in repairs brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repairs CP towel ring, dia not less than 200mm complete all as specified and directed.

S&F in repairs 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and directed.

S&F in repairs CP Jet spray suitable for 15mm bore with 1m lenght pipe and connecting pieces including all necessary fittings and accessories complete all as specified and directed.

S&F in repairs wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting stand complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm.complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs corner glass shelf 5.5mm thick (with bracket) complete all as specified and directed

S&F in repairs 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repairs CP grating 100mm dia complete all as specified and directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) complete all as specified and directed.

S&F in repairs 500 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling complete all as specified and as directed.

S&F in repairs 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling complete all as specified and as directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

All as per item No 64.00 but exceeding 500 ltr but not exceeding 1000 ltr capacity

S&F in repairs brass spindle (face part) heavy duty for CP pillar cock, Bib cock, wall mixer, basin mixer,concealed stop cock etc 15mm bore complete all as specified and as directed.

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.

S&F in repairs PVC handle for low level cistern complete all as specified and directed.

S&F in repairs PVC syphonic action system (internal fittings) for PVC low level cistern including float valve, handle & connection rod etc complete all as specified and directed.

S&F in repairs waste fitting brass chromium plated of 32mm dia for wash hand basin with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs waste fitting brass chromium plated of 40mm dia for sink with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 610 mm long PVC waste pipe flexible type 25mm dia suitable for coupling 32mm &40 mm dia complete all as specified and as directed.

S&F in repairs MS bracket upto 450mm long for wash hand basin and sink incl Refixing of existing wash hand basin and minor repair complete all as specifid and as directed.

S&F in repairs 15 mm dia GI steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs GI steel tubing medium grade galvanised 20mm dia with all fittingsand fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription n exc 1.0 sqm each complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutter of any discription exc 1.0 sqm but nexc 2.0 sqm each complete all as specified and as directed.

S&F in repairs stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads and S&F sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specified and directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but n.exc 4.0 sqm each complete all as specified and as directed.

Taking down shutters of any description nexc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exe 2 sqm each complete all as specified and as directed.

S&F 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain, framed pannelled shutters factory made (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per (IS : 1003 complete all as specified and as directed.

S&F 30mm thick factory made, 2nd class hard wood,glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F 2nd class Hard wood 35 mm thick glazed and skeleton(doors) shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., size of frame n.exc 125 x 60 mm complete, as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 50 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F in repairs 25 mm dia aluminium powder coated drappery curtain brackets of brass /nickel chrom polished for curtain rod etc all as specified and directed .

S&F Aluminium handles, cast type anodised 'D' shaped , 150mm long ISI marked all as specified.

S&F Aluminium handles, cast type anodised 'D' shaped , 100mm long ISI marked all as specified.

S&F MS, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, etc complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min) (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min) (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min) (iv) 4 mm thick glass superior quality.(Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos.(Min) (vii) Sliding rollers per shutter - 02 Nos.(Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S&F framed work/ shutters/ modular cup board work with 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade complete as specified and directed.

S&F in repairs stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S&F in repairs 100 mm size MS mat / glossy finish handle complete all as specified and dirceted.

S&F in repairs 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete all as specified and dirceted.

S&F in repairs mild steel drawer cabinet channel for moving the drawer etc complete all as specified and dirceted.

S&F in repairs modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete all as specified and dirceted.

All as per item No 110.00 above but basket size 0.50 m x 0.53 m x 0.15 m

All as per item No 110.00 above but basket size 0.50 m x 0.53 m x 0.21 m

S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section and cast iron - aluminium alloy 300 mm long complete all as specified and dirceted.

S&F in repairs 50mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and dirceted.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer with and including wood putty as directed complete all as specified and dirceted.

S&F in repairs 18/19 mm thick, Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, etc complete all as specified and dirceted.

S&F in repairs 2nd class hard wood plain fillet, squre, rectangular in section Beads, straight Exc 3 & n exc 6 Sq.cm ) for glazed or gauzed joinery, renewed, including mitres etc. complete all as specified and dirceted.

S&F in repairs 2nd class hard wood plain fillet, squre, rectangular in section Beads, straight Exc 13 & n exc 25 Sq.cm Sqcm) for glazed or gauzed joinery, renewed, including mitres etc. complete all as specified and dirceted.

S&F in repairs stainless steel hinges for modular kitchen shutters complete all as specified and dirceted.

S&F in repairs powder coated aluminium door seals length as reqd and 3 cm in width with rubber guasket at bottom of door seals for fixing to door complete all as specified and dirceted.

S&F in repairs 25 mm dia powder coated drappery curtain rod with brass /nickel chrome polish bracket complete all as specified and directed .

S&F in repairs 100mm aluminium anodised, barrel tower bolt of extruded section complete all as specified and as directed

M&L for half brick work in CM ( 1:4 ) with using flyash brick modular straight or curved on plan exceeding 6.0mtr mean radius including demolition of old brick work complete all as specified and directed.

M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement including taking down old plaster complete all as specified and directed.

M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound including taking down old plaster complete all as specified and directed. Note: WPC shall be measured and paid separetly.

M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed.

Cleaning of roof slab/chajja with sweeping with brooms,removing all depositions/mud/vegetations washing with water etc and removing the spoil to a distance n.exc 50m complete all as specified and directed.

M&L for complete removal of existing treatment on old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat of birla wall care based putty (where it is required) all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately.

M&L for one coat of 1.50mm thick wall care putty on walls/ceiling complete all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided

M&L for rendering 15 mm thick wall plaster in CM 1:3 mixed with water proofing compound complete including taking down old plaster complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for complete sunken floor treatment by providing water proofing treatment to sunken floor surfaces of RCC slab by the following specifications complete all as specified and directed :- (a) PCC 1:1.5:3 type A0 (using 12.5mm graded stone aggregate) in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or Make/Brand as specified in Particular Specification. and finished the surface even & smooth without using extra cement. (b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (c) Applying surfaces with bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm on sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/Nahanni trap etc including demolition ,cutting holes and making good the disturbed surface as per existing complete all as specified and as directed. (d) Applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. (e) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. Note : Top floor Area shall be measured for payment.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for 40mm thick PCC type B1 (1:2:4) using 20 mm graded stone crushed stone aggregate as in flooring complete all as specified and directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 including demolition of old existing tile complete all as specified and directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 including demolition of old existing tile complete all as specified and directed.

All as per item No 139.00 above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 on wall complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size n.exc 0.18 sqm each tile as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) including demolition of old existing tile complete all as specified and directed.

M&L for 75 mm thick PCC1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, sub base of floor, etc complete all as specified and directed

M&L for chequered cement concrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed/ bedding layer of CM (1:4) etc including demolition of old existing tile complete all as specified and directed.

M&L for precast cement concrete type B-1 (1:2:4) as in karb stone set in CM (1:4) ancluding necessary moulds/form work etc. and fixed in position complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavation in post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundation ,post, etc complete all as specified and directed.

S&F in repairs MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 if any complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-painted pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa Plain steel sheet as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

M&L for complete removal of existing treatment and applying cement based wall care putty of 2mm thick over plastered surfaces and making the surface even and smooth and applying one coat of alkali resistant primer and applying two coats of OBD complete all as per manufacturer's instruction complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and no pigment on roof over 15mm 1:4 cement screed including demolition of old tile complete all as specified and as directed.

vikas traders (BID ID -3380360)

M/S BABULAL SURAJMAL (BID ID -3373204)

SATHI ENTERPRISES (BID ID -3380520)