Civil Works Repairs, renovation etc of Ayush Unit at SDH Sogam District Kupwara.

Part A Civil Work: Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

Providing and laying of dry stone soling(hand packed) in foundation & plinth incl ramming, including all leads, lifts carriages complete.

Supplying and Filling of Nallah Muck Including Watering Compacting and dressing under floors incl all carriages

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including carriage of material from source to site of work

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl all carriage from source to site of work.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all carriage from source to site of work.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement all works apove plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) above Plinth Level incl all carriage from source to site of work.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level

Centring and shuttering including strutting, propping etc and removal of form work Foundations, footings, bases of columns etc. for mass concrete.

Centring and shuttering including strutting, propping etc and removal of form work Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Centring and shuttering including strutting, propping etc and removal of form work Suspended floors, roofs, landings, balconies and access platforms..

Brickwork with common burnt clay (non-modular) bricks of class designation 75 incl curing and carriage from source to site of work incl extra for brick work in superstructure etc all complete

Dry random rubble masonry with hard stone in foundation and plinth Nallah stone,

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Imported wood

Providing and fixing panled or glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panesIncluding ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Ist class kail wood 30mm thick.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 30 mm thick Ist class kail wood.

P/F of 3.5 mm thick glass panes in fixed windows/ doors incl wooden beadings complete.

Providing wood work in Trusses, Purlins and rafters , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Imported wood (Available 50%)

Providing wood work in Trusses, Purlins and rafters , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Imported wood (new 50%)

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead Of sectional area 40 sqcm. and above

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of G.S. Sheet

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments. etc. complete Size of tile 600x600 mm

P/F of insulaiting board ceiling of approved quality (ply wood 12 mm thick) with necessary screws, incl frame work of budloo wood, incl cost of nails & beading all complete job.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size of tile 300x300mm

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Raj Nagar plain

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble Work

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ .90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Part B Plumbing and Sanitary: Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. Conceild work incl cutting chases and making the walls good etc. PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge.Conceild work incl cutting chases and making the walls good etc PN-16 pipe , 40mm OD(SDR-7.4)

P/F PVC Soil waste vent pipes 100 mm dia incl all complete job

P/F PVC Soil waste vent pipes 75 mm dia incl all complete job

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing & Fixing first quality white vitreous china flat back wash basin size 550 x 400 mm with C.I/M.S brackets painted with two or three coats of enamel paint of approved shade over a coat of primer, C.P. brass waste and coupling, chain and rubber plug, P.V.C Flexible waste pipe complete including cutting and making good the walls wherever required including White vetreous china pedestal

Providing and fixing 15 mm nominal bore C.P. brass angle valve with CP brass wall flange of approved make complete incl cutting making good the walls wherever required. Cera, jaquar, Florentene or Equivalent brand.

P/F CP Brass Soap dish/tray of approved make incl screws complete.

P/F CP Brass single hole mixer for wash basin of approved brand for washbasin of approved make incl cutting and making good the walls wherever required. Cera, Jaquar, Florentene or Eq. brand

P/F CP Brass bib cock of approved make incl cutting and making good the walls wherever required. Cera, Jaquar, Florentene or Eq. brand

P/F CP brass non-telephonic wall mixer of approved make incl cutting and making good the walls wherever required. Cera, Jaquar, Florentene or Eq. brand

P/F of towel ring of approved make

P/F of 15mm dia PVC connection 600 mm long incl end union and washers complete.

P/F CP/Stainless steel anti cockroach trap(grating) on floor traps and floor drains with cement mortar, complete in all respects 100 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Construction masonry chamber (Man hole) 60x60x75 cm, inside with 7.5 class brick designation brick work in cement mortar 1:4 and RCC top slab (1:2:4) mix incl all job complete.