PROVN OF COVERED SHED FOR PARKING OF DUTY VEH AT CHQ OF RVC C C AND SHED FOR ARMY DOG AT MIL VET HOSP UNDER AGE BR II AGE EM I OF GE NORTH MEERUT CANTT

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

Excavation in post holes (or similar holes) n.exc 0.50 cum, each in soft/ loose soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for hardcore of broken Stones of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M& L for providing Cement concrete 1:3:6 Type C 2 (using 40 mm graded crushed stone aggregates) ,in foundations & post holes filling and mass concrete complete all as specified and directed.

---------------BLANK-----------------

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Supplied and fixed mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 11-15 mm dia of neck and exc 10cm and n exc 15 cm long, complete all as specified and directed.

S&F mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised 12 mm dia of neck and exc 15 cm and n exc 30cm long complete all as specified and directed.

S&F rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F rolled mild steel in steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St. - 240. complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

---------------BLANK-----------------

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for laying 40mm thick PCC (1:2:4) type B1, (using 20 mm graded crushed stone aggregates) as in flooring cement concrete surfaces fnished even and smooth with using extra cement complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for PCC 1:1.5:3 type B-1 100mm thick flooring (complete will be laid through RMC plant) laid in alternate bays and finish even and smooth without using extra cement including making impression with 12 mm dia round bars in diagonal pattern of size 150 x 150mm whilest concrete is green complete all as specified and directed. Note : Rate will be deemed in this item including of form work and making diagonal impression by 12mm plain bar.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F ceiling fan 1400mm sweep 240 volt 50 Hz single phase, complete with all connected accessories complete all as specified and directed

Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn thorough and including non metallic med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches /sockets/ regulators etc.all as specifiedand as directed for :- (a) One light point controlled by one way switch.

All as per item No 27 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed.

M&L for socket outlet flush type multipurpose 2 in 1, 3 pin , 5 and 15 Amps complete all as specified and as directed

Supply and fixing ceiling fan regulator, electronic, socket type, rotary 0 to 04 steps, hum free, AC, 230 volts, 120 watts, duly ISI marked complete all as specified & directed.

M&L for Ceiling rose PVC/ Polycorbonate insulated body with three terminals fixed on anodized, 100 x 100 mm pressed steel box with 3mm thick Bakelite cover complete all as specified and as directed.

Supply & fix LED tube light fitting surface / pendent mounting decorative box type batten with 18/20 Watt 4 feet long, T-8 diffuser type & 18/20 watt rectrofit tube complete all as specified and directed.

M&L Sheet metal enclosure for DB's with IP 43- IK 09 protection 200 amp rated insulated bus bar, shrouded neutral bar, earth bar, blanking plate, cable ties & circuit identification labels 240 volts SPN 12 way, with metal double door complete all as specified and directed

Supply and fixing Isolator DP, AC, 240 volts of 63 Amps, and making connections complete all as specified & directed.

Supply and fixing in replacement MCB SP, AC, 240 volts of 06 to 32 Amps, 1 module, C curve, 10 kA, confirms to IS/IEC 60898 -1:2002 and making connections complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 8mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , for pit cover including testing on completion complete all as specified and directed. Note:-After completion of work if desired test result is not obtained the earthing is to be redone without any extra cost to deptt.

S&F LED street light luminaries in a single pipe deep drawn aluminium housing anodised inside and acrylic cover complete with 45 watt minimum 100 lumens per watt in built control gear including up to 2.5 mtr twin core aluminium conductor for connector of street light fitting from LT OH line/ceiling rose.and street light bracket made out of 25 mm dia GI pipe Medium grade 0.90 mtr long band to shape 120 degree angle fixed to pole/wall/ceiling by two nos MS clamp made out of flat iron size 40 x 5 mm with nut bolts and washer complete all as directed by Engr in Charge.

Supply and Replace LT under ground XLPE insulated armoured heavy duty and PVC sheathed aluminium stranded conductor cable 1100 V grade (for laid in the ducts, fixed on wall, roofs and trusses with clips including necessary accessories like copper lugs, cable entry glands, suitable size of bolts / nuts / washers etc) complete of size 16 Sqmm 2 Core

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed by Engr-in-Charge.

M&L for laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and as directed.

S&F 40mm dia steel tubing light grade in protection of cable at road crossing / hard standing / pole proteciton fixed with clamp as per site requirement complete all as specified and directed

m/s gupta construction

SA construction co.

Arun Construction Co.

mohanlal gupta

Tridev Construction Company

High Tech Metal India

veer enterprises