Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹92,875
EMD Value
₹1,858
Closing Date
5 Mar 2022, 6:00 pmClosed
AC(WORKS)/AEE(CIVIL)
O/O DIG SHQ BSF KUPWARA
Improvement /up gradation of toilet block near office block for ORs of 27 Bn Under SHQ BSF Kupwara
2022_BSF_672606_1
Engg /E-Tender /Works /SHQ KUP/2022/1327-40
Open Tender
Civil Works - Others
Item Rate
30 days
SHQ BSF KUPWARA
Please refer Tender documents.
8 documents required · 8 mandatory
₹150
DIG SHQ BSF KUPWARA
₹1,858
Yes
21 Mar 2022
9 Feb 2022
8 Mar 2022
9 Feb 2022
5 Mar 2022
9 Feb 2022
Amount
Demolishing cement cocrete manually/ by mechanical means including disposal of materials with in 50 m leads as per direction of Engineer in charge nomainal cocrete 1:4:8 or leaner mix(i/c equivelent design mix
Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering -All work up to pligth level 1:3:6 ( 1 cement: 3 coarse sand :6 graded stone aggregate 20 mm nominal size)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy,bottle green,black of any size as approved by Engineer-in- charge in skirting,risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shades complete.
Providing and laying vertified tiles in different sizes (Thickness to specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make,in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) , jointing with gray cement slurry@ 3.3 kg /sqm including grouting the with white cement and amtching pigments etc complete size of tiles 600x600 mm
Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid ,10 ltrs low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS 7231, with all fittings and fixtures complete, including cutting and amking good the wall and floors wherever required W.C pan with ISI marked white solid plastic seat and lid.
Providing and fixing wash basin with C.I brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreos China wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer.
Providing and fixing white vitreous china flat back or wall cornor type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm size respectively.
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complte .Flexible pipe 40 mm dia
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply ,including all CPVC plain and brass threaded fittings ,including fixing the pipes with the clamps at 1.00 m spacing ,This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge 25 mm nominal size outer dia pipes.
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expansion ,single socketed pipes 110 mm dia.
Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
Providing and fixing CP brass angle bib cock of approved quality confirming to IS 8931,15 mm nominal bore
Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 ,15 mm nominal bore
Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete
Providing and fixing PTMT soap dish holder having of 138 mm breadth 102 mm height of 75 mm with cocealed fittings arrengements,weighing not less than 106 gms.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with coclead fittings arrangements of approved quality and colour 600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm weighing not less than 190 gms
Providing and fixing toilet paper holder CP brass
Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised alluminium angle frame with CP brass brackets and guard rail complete fixed with 40 mm long screws rawl plugs etc, complete
NASEER AHMAD PEERZADA
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .