Loading
Loading…
Loading…
Tender Value
₹4.1 L
EMD Value
₹8,260
Closing Date
2 Sept 2026, 6:00 pm5d left
EXECUTIVE ENGINEER OFFICE REW DIVISION REASI ROOM
EXECUTIVE ENGINEER OFFICE REW DIVISION REASI, BLOCK NO. 2, ROOM NO. 205
Upgradation of Panchayat Ghar Arbais in Panchayat Arbais Block Gulabgarh Pyt Arbais Block Gulabgarh under scheme PRI for year 2026-27
2026_RDPR_322244_20
e-NIT No. 126 of REW REASl of 2026-27
Open Tender
Civil Works
Percentage
90 days
REASl
Please refer Tender documents.
2 documents required · 2 mandatory
₹300
MH 0515
₹8,260
Yes
25 Aug 2026
25 Aug 2026
3 Sept 2026
25 Aug 2026
2 Sept 2026
25 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including all leads, lift and carriage complete | 6.37 | Cum | 4,826.5 | ₹30,744.81 |
| 2 | 12 mm cement plaster of mix : 1:4 ( 1 cement : 4 fine sand ) Including all leads, lift and carriage complete | 185.87 | sqm | 285 | ₹52,972.95 |
| 3 | Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid
separately) : | 100.87 | sqm | 850 | ₹85,739.5 |
| 4 | Providing and fixing plain, square edged wooden beading 65x12 mm section with screws of approved quality for ceiling 1st class kail wood. | 50 | meter | 161.6 | ₹8,080 |
| 5 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).30 mm Second kail wood | 12.55 | sqm | 2,597.75 | ₹32,601.76 |
| 6 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood (35mm) including all leads, lift and carriage complete | 5.86 | sqm | 2,853.95 | ₹16,724.15 |
| 7 | Ply board in panelled doors | 3.51 | sqm | 850 | ₹2,983.5 |
| 8 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete (300x16 mm) including all leads, lift and carriage complete | 3 | No. | 298.75 | ₹896.25 |
| 9 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm | 6 | No. | 95.35 | ₹572.1 |
| 10 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10 mm | 36 | No. | 63.35 | ₹2,280.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.69 MB
BOQ_1079773.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].