Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.8 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹46.6 L+₹3.8 L (8.79%)Rejected-Finance | L2 | Rejected-Finance Higher rate quoted | |
| 3 | L3₹46.6 L+₹3.8 L (8.94%)Rejected-Finance VILL P O MANKAR DIST BARDHAMAN PIN 713144 | MANKAR | BARDHAMAN | WEST BENGAL | 713144 | L3 | Rejected-Finance Higher rate quoted | |
| 4 | L4₹47.1 L+₹4.3 L (10.0%)Rejected-Finance SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L4 | Rejected-Finance Higher rate quoted | |
| 5 | L5₹47.5 L+₹4.7 L (11.0%)Rejected-Finance 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L5 | Rejected-Finance Higher rate quoted |
Tender Value
₹49.3 L
EMD Value
₹98,600
Closing Date
29 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_534282_1
8400-826/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D, Cat a (i)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹98,600
Yes
26 Aug 2022
28 Jun 2022
30 Jul 2022
28 Jun 2022
29 Jul 2022
15 Jul 2022
Amount
Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc. in soft / loose soil complete all as specified and directed.
M&L for moorum filling in floors or pavements, laid in layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.
M&L for TMT deformed steel bars 10mm dia & over, cut to length, bend to shape required including cranking, bending and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and directed.
All as per item No 5.00 mentioned here-in-above but 8mm dia in stirrups complete all as specified and directed.
M&L for MS angle iron/compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc confirming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and directed.
S&F rolled mild steel in plates channel (plain or chequered) square cut or notched (ordinary and counter shunk)forming holes, without any attachment of quality FE 410-W (Gde-E-250) quality-A complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces and complete all as specified and directed.
Removing excavated soil n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.
Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and directed.
S&F tubes medium grade galvanised 25mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F tubes medium grade galvanised 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and exc 1.5m but n.exc 3.0 m in depth for foundation etc. in soft /loose soil complete all as specified and directed.
M&L for RCC M-25 (using 20mm graded stone aggregate), design mix in foundations, footings, foundation beams, plinth bumbasses of columns and mass concrete complete all as specified and directed
M&L for RCC M-25 (using 20mm graded stone aggregate), design mix in columns, pillers, piers, post and struts complete all as specified and directed
M&L for M-25 (using 20mm graded stone aggregate), design mix in in beams, cantilevers, lintels over 1.5m span complete all as specified and directed
M&L for formwork to sides concrete foundations , bases of coumns , sides and soffits (if any) of foundation and plinth beams, and similar work complete all as specified and directed
M&L for formwork to sides piller post ,struts, and columns and similar work complete all as specified and directed
M&L for RCC Design Mix M-25 using as in walls, retaining walls, cement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed
M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter and similar work complete all as specified and directed
S&F steel work in tubular trusses, roof trusses, purlins, posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws complete all as specified and directed
Excavating over areas, n.exc 1.5 m deep and getting out for foundation etc. in soft /loose soil complete all as specified and directed
M&L for broken stone hardcore of guage n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed
M&L for 100 mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete all as specified and directed
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ when thickness of concrete slab is 100mm complete all as specified and directed.
M&L for fly ash brick straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed
M&L for 15mm thick rendering in CM (1:4) mixed with water proofing compound on external surfaces of concrete/brick wall finished even and fair complete all as specified and directed (Note: Water proofing item to be paid separately)
Supply only Liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for 15mm thick rendering in CM (1:6) on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed
M&L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for preparation of newly plastered surfaces and applying three coats of white wash on walls including preparation complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone coarse aggregate) in subbase and plinth protection complete all as specified and directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
M&L for flat iron fillets (for securing wire mesh, CGI Sheets etc.), including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed
M&L for cement concrete, 1:2:4, type B1 (using 20mm graded stone aggregate) as in bed block, coping ,lintel upto 1.50m span, cills, kerbs etc complete all as specified and directed
Excavation in trenches, n. exc 1.5 m wide and n.exc 1.5 m in depth, for foundation, laying of pipes, cables etc. or for shafts , wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed
M&L for fly ash brick straight or curved on plan to any radius, in half brick walls built in Cement mortar (1:4) complete all as specified and directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed
M&L for formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels cantilever, shelves including supports, overhangs, etc also splays between floors and beams etc complete all as specified and directed.
All as per item No 45.00 mentioned here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed
Rendering 5mm thick in cement and sand mortar (1:3) on concrete surfaces (ceiling) finished even and smooth without using extra cement, complete all as specified and directed.
M&L for cement concrete type B0 (1:2:4) (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm in floors laid over and including 15mm thick (1:4) cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as specified and directed.
M&L for glazed ceramic colour joint free tiles in vertical surface 450X350X7mm / 350x250x7mm thick set and jointed in neat cement slurry over and including 10 mm thick cement mortar (1:3) plaster and pointed in coloured cement to match complete all as specified and directed
M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) 75mm thick as in sub base for receiving floor finish complete all as specified and directed
Preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed
S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
M&L for steel tubes,15mm dia bore 'medium grade' with all fitting; laid in trenches or wall complete all as specified and directed.
S&F CP Bib taps 15mm dia, with crutch of butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fancy type and fixed complete all as specified and directed.
M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.
S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed
S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F 110mm bore PVC(SWR) bends any radius complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.
S&F vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed
S&F vitreous china squatting pan ‘Orissa’ pattern, size 580 X 440mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding and make good the disturbed surface, complete all as specified and directed.
S&F 15mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F PVC connection pipe 15mm size & 600mm long with chromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.
S&F vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets complete all as specified and directed.
S&F stop valves 15mm dia CP fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified and directed
M&L for concrete bed to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6 type C-2 complete all as specified and directed
M&L for reinforced concrete pipes 150mm, class NP2 laid and joinded complete with collar complete all as specified and directed.
S&F waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm), complete all as specified and directed.
S&F waste pipe 32mm dia, complete all as specified and directed
S&F tubular towel rail, 20mm dia, D type, brass chromium plated, 60cm long between flanges complete all as specified and directed
S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed
S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe complete all as specified and directed.
Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm in soft loose/soil complete all as specified and directed.
M&L for 200mm thick mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (i.e. 10% fly ash, 30% clinker and 60% stone dust) laying in layers n.exc 30cm hick, watering, ramming and compacted with vibratory/power roller 8 to 12 ton to required camber and gradient complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed
M&L for 75 mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete all as specified and directed
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ when thickness of concrete slab is 75mm complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
S&F 500 ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevant IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge.
S&F high pressure PTMT float valve with epoxy coated aluminium rod and high density polyethylene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.
S&F 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.
S&F 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.
S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top) confirming to relevant IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge
EM PORTION M&L point wiring for light point/ fan point one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including suitable size PVC conduit (ISI marked), including terminal switch boxes PVC (ISI Marked) and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 92.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 92.00 above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for point wiring for one socket outlet on independent board controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated Unsheathed FRLS cables in and including suitable size PVC conduit (ISI marked), including terminal switch boxes PVC (ISI Marked) and 4.0 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed FRLS cable as earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)
S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
S&F stepped type electronic fan regulator flush type 240 Volts complete all as specified .
S&F building security light fittings 25 watts, minimum system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbonate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.
S&F 80 watt LED High bay light fittings complete all as described here-in-below:- (i) Total system lumen not less than 8800 lumens. (ii) High pressure die cast aluminium. (iii) IP rating :- IP 66 (iv) Front cover : Toughened Clear glass. (v) Mounting :- Suitable for bracket arm (vi) Finish :- Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp :- High bright LED with Lens. (viii) System efficacy (lm/W) of the luminaries :- Not less than 110 lm/watt. (ix) Colour temperature :- Not less than 5700K (x) Colour rendering Index (CRI) Not less than 74 (xi) Life : Not less than 50000 Hrs of operation (xii) Optics :- Spread (Beam angle along the driveway)- 120degree, Through( Beam angle across the drive wat)- 60 degree, Beam pattern - Asymmetrical driveway (xiii) Control gear:- Inbuilt electronic driver, PF not less than 0.90 and TDH less than 20% with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection :- Inbuilt surge protection minimum 5 KV (xv) Heat Sink :- As per OEMs design.
S&F 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.
S&F 10 W LED light fitting bulk head wall mounted, extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 10 watt,6000K including necessary connection complete all as specified and directed.
S&F two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), including 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Vol sand to be housed in DBs including necessary connection complete all as specified and directed. (Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. (Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submitted to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
S&F ceiling fan 1200mm size , star 5 rated, ISI mark, 240V, 50 Hz all as specified and directed.
S&F ventilating exhaust fan 230 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size complete all as specified and directed.
Supply, laying/fixing/connecting, testing and commissioning of 10 Sqmm x 2.0 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/ on wall/ poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge. (Note:- (i) Excavation, sand cushioning, brick will be measured and paid separately).
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note : Punned thickness 18 cm shall only be considered for payment).
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
S&F pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
ANIMA ENTERPRISE
Hooghly Construction Co.
UNITED BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .