GEAFU-61/2025-26

Amount

B/R PORTION

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m depth for foundation etc, n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling complete all as specified and directed .

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick , including watering ,ramming complete all as specified and directed .

Removing of soil to distance exc 50 mtr and n.exc 250 mtr depositing at a level n.exc 1.5 mtr above the starting point complete all as specified and directed .

M & L for RCC M-25 Design Mix as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed .

M & L for TMT bar 10mm dia and over cut to length, bent to shape as required and binding with MS wire n.less than 0.9 mm dia annealed complete all as specified and as directed .

All as per item no.7 above but 5 to 10 mm dia as in stirrups complete all as specified and as directed .

M & L for form work to the side of Footing of column and plinth beam complete all as specified and as directed .

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall / Ridges, fixed with self tapping screws as specified.

Supply and fix rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed .

S&F rolled mild steel as Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410 Gde E-250 quality A complete all as specified and directed.

S&F rolled mild steel as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410 Gde E-250 quality A complete all as specified and directed.

S&F Mild steel screw bolts 16 to 20 mm dia of neck (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm and n exc 45cm long complete all as specified and as directed.

M & L for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and as directed .

M & L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface n.exc 10 cm width or girth complete all as specified and as directed .

M & L for preparation of surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and as directed .

M & L for sand (cushioning) filling under floors including watering and consolidation all as specified and as directed by Engr- in -charge.

M & L for Machine pressed precast concrete interlocking paver block coloured any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with gray cement and pigment etc, complete all as specified and as directed by Engineer-In- Charge.

M & L 100mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate as in floor and spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed. Note : The work will be executed in non accessible area for vehicles.

M & L for Surface dressing n exc15 cm deep in soft or loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 20mm graded agg) as surface channels and drains complete all as specified and directed.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 on brick wall or concrete surface finished even and smooth withuot using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for form work to soffits of suspended slab such as roof slab, floor sides , landing and similar work n.exc 200 mm thick on fair finished surfaces of concreting complete all as specified and as directed.

M & L for RCC M-25 Design Mix as in slab supported on wall columns, beam and floor and the like complete all as specified and as directed.

M & L for form work to faces of walls retaining walls and similar works complete all as specified and as directed.

M & L for RCC M-25 Design Mix in wall and retaining wall and the like any thickness above the top of footings complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Rolled sections as in framing for cladding, glazing, cooler stand and the like fixed with angle cleats and connecting plates, etc conforming to Fe-410 Gde E-250 quality A complete all as specifed and directed.

M&L for preparation of new/old plastered surfaces and applying two coats of cement base paint in camouflage pattern over a coat of priming paint on walls complete all as specified and directed by Engr-in-Charge. (Camouflage pattern will be approved by the GE in consultation with the Station authorities).

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall not exc half brick complete all as specifed and directed by Engineer in Charge.

M&L for Rolled sections as in framing for cladding, glazing, cooler stand and the like fixed with angle cleats and connecting plates, etc conforming to Fe-410 Gde E-250 quality A complete all as specifed and directed by Engineer in Charge

M & L for providing and fixing T24 exposed grid system suspended ceiling with mineral fibre/gypsum tiles/ACP sheet of size 600mmx600mm, including suspension system, hangers, and all accessories, complete as per manufacturer's specifications :- (a) Grid system T24 mudular exposed grid, 24mm width, hot-dip galvanised steel with baked polyester coating, corrosion-resistant. (b) Main runners 24mm wide flange, spaced at 1200mm c/c. (c) Cross tees 24mm flange, 600mm & 1200mm, interlocking type. (d) Perimeter angle L-shaped, 24mmx24mm, fixed with plugs and screws at 450mm c/c. (e) Suspension system galvanized steel wire hangers @ 120c/c, fixed to structural steel using GI cleats and expansion fasteners. (f) Installation complete system to be installed in level, plumb and alignment, ensuring performance compliance. (g) Make : Armstrong / USG Boral / Saint Gobain or equivalent complete all as specified and as directed.

S & F ACP (PVDF finish) sheet 3-6mm thick as approved by GE in ceiling of size 595mmx595mm fixed in T24 grid system, cut edge should be sealed or capped with an aluminium profile, fixed with self tapping screws made of SS complete all as specified and directed by Engineer in Charge. Note : Colour and pattern to be approved by GE.

E/M PORTION

Supply & Fix Monoblock pump with motor 0.5 HP,Suction Size & Delivery Sizes 20/25 mm dia, Head range 9 to 18 meter, 2700rpm, 1440-6840 LPH and suitable, thermal over load protection relay, including housing made up of MS Sheet and Angle iron of Size 40x40x5mm for safety from rain water and 20mm suction of required length complete, with complete fixing accessories and connection complete all as specified and directed. Make: Kirloskar / Crompton/ KSB/ BEACON.

Supply and laying GI water tubing for 25 mm bore, medium grade galvanized with all fittings (such as tee, elbow, flanged, long socket, union, short pieces) and fixed to wall or ceiling or laid in floor,duct and trenches etc complete all as specified and directed by Engr-in-Charge . Note: - Rate quoted includes road cutting / wall floor and making good damaged portion matching with existing surface with all existing finishes. Make : Surya Prakash / Jindal /TATA / BST / Swastic.

S & F copper cable stranded cable 1100 Volt grade of size 1.5 sqmm 3 core complete all as specified and directed. Manke : Finolex, Havells.

S & F MCB Thermo plastic Junction box SPN DB 8 module, IP 65, IK 09 complete all as specified and directed by Engr-in-charge. Make : Legrand / L&T / Schneider.

S & F MCB single pole & neutral 40 Amp rating 'C' Series 240 Volt complete all as specified and directed by Engr-in-charge. Make : Legrand / L&T / Schneider.

S & F MCB single pole (SP) 10 Amp rating 'C' Series 240 Volt complete all as specified and directed by Engr-in-charge. Make : Legrand / L&T / Schneider.

Supply & Fixing PVC Foot valve of size 25 mm dia as per site requierment complete all as specified and directed by Engr-in - Charge.

M & L for PCC foundation of size 0.5 x 0.5m in 1:3:6 type C2 (40mm graded aggregate) complete as per manufactures design, including necessary excavation & earth work in soft/loose soil, , grouting, foundation bolt etc removing excavated material to a distance upto 50 M as directed by Engr-in-Charge

Supply and installation of silent Diesel Engine driven generating set ,Rating 100 KVA 415 volts, 3 phase 4 wire, Turbocharged Intercooled developing 126 BHP at 1500 RPM.engine as per IS:10001/ 10002 and Alternator as per IS: 13364, fuel type - Diesel, Output Power : 80 KW (at 0.8 Power Factor, 3 phase), Type : Silent/Canopy type, diesel engine-driven alternator. Application : Continuous /Standby /emergency power and complaint to CPCB IV + Emission Norms. Note : a) IoT remote Monitoring System will be Provided as Standard feature. b) Sound proof, Wheather Proof Enclosure. C) Low vibration, best in class fuel consumption with electronic fuel injection system. d) The enclosure is of modular cconstruction with the provision to assemble and dismantle easily. (e) The sheet metal components are pre-treated and are Polyester based powder coated (inside as well as outside) for long life. (f) All Nuts- Bolts Hardware are of Stailness Steel for longer life. (g) Optimised EATS (Exhaust After Treatment System) is provided to control emission & exhaust noise. (h) The silent DG set comes with following safety feature : (High water temperature, Low lub oil pressure, Emergency stop push push button outside the enclousre. DOC, SCR. In-built draw in type tank of 250 ltr. capcity. Engine Specification : Make /Model : Kirloskar, Cummins. Engine, direct injecting,1500 RPM, 50 Hz, Electronic governor (+ 1% frequency variation ). Cooling System : Radiator with coolant circulation pump. Starting System : 12 V (105 AH) DC electric starter motor with battery. Prime Mover : Type : Brushless, Self-excited, self-regulated. 80 KW prime mover output. Voltage : 415V, 3 Phase, 4 Wire System. Frequency : 50 Hz, Power Factor : 0.8 (lagging). Insulation Class : H, Temperature Rise : Class H, The alternator conforms to IS: 4722, BS EN 60034-1 & will be suitable for tropical ccondition. Complete taking into consideraation local environmental conditions and complete with standard OEM recommended accessories like starting switch and whole vructare mounted on MS frame pendental with anti vibration Pad rated for continous operation of up to 10 hours.

Control Panel : Type : Microprocessor/ PLC-based AMF /Auto Synchronization panel. Meters/Indicators : Digital display for voltage , Current, Frequency, Power, KWh. Oil pressure, Coolent temperature, fuel level. Battery charging & Status indication. Protection : Overload, Short Circuit, Under/Over voltage , Over speed, Low lubricating oil pressure, High engine temperature, low fuel. ACOUSTIC ENLOSURE: • The Enclosure is of modular construction. • Durable industrial locking system is provided on doors. • The sheet metal components are pre-treated and are Polyester based powder coated (inside as well as outside) for long life. • In - build draw in type fuel tank of 250 ltr. capacity. • The walls of enclosure are insulated with the fire-retardant & noise absorbent PU foam/rookwool.ol so as to comply with the noise level of 75dB(A) at distance of 1mtr. in open free field environment as per ISO 8528 part 10specified by ministry of Environment & Forest. DG Control Panel is manufactured with 16/18 gauge CRCA sheet and is powder coated for a weather-proof and long lasting finish. The Control Panel consists of Microprocessor based genset controller, MCCB of suitable rating, Key Switch, Push Button (starter),LED: Battery Charging alternator fail indication, Current Transformer, Instrument fuses. The genset controller has all the basic safeties and protections.

M & L for PCC foundation of size as requirement at site in 1:3:6 type C2 (40mm graded aggregate) below ground level 15 CM and above ground level 60 cm complete as per manufactures design, including necessary excavation & earth work in soft/loose soil, , grouting, foundation bolt etc removing excavated material to a distance upto 50 M as directed by Engr-in-Charge

Supply, installation, testing and commissioning of cubical compartmentized outdoor type LT panel vermin proof, weather proof, front and rear door openable with locking arrangement fabricated out of 3.15 mm thick CRCA sheet steel and base channel and suitable for operation on 415 volts, 50 Hz Ac supply with switchgear and accessories as given below complete with pad locking sealing arrangement earthing stud lebeling, painting, inter/connections providing of danger plates etc as per specifications and comprising with following:- (Make : ABB/ Schneider/ Havells) INCOMING : (a) MCCB 160 amps , 36 KA 4 pole, Ics= 100% of Icu, adjustable type with overload setting 0.8 ln to 1.0 In,Qty- 01 no (b) Bus bar suitable for 250 Amps, mounted on insulators- 04 No's made of aluminium dulydrilled hole for cable connections. (c) Multifunction meter make L & T (d) LED type indication lights for ON, OFF, TRIP and three phase -01 set . (e) On LOAd Changeover switch 160 Amps - 1 nos OUTGOING: (a) MCCB 80 amps , 25 KA 3 pole, Ics= 100% of Icu, Fixed type Qty- 01 nos (b) MCCB 32 Amps, 25 KA 3 pole, Ics= 100% of Icu, Fixed type Qty- 01 Nos (c) 15 HP Soft Starter-1 nos make ABB, 30 HP Soft starter - 1 nos Make ABB (d ) MPR (Motor Protection Relay) suitable for 15 to 30 HP Motor-02 Nos - Make L&T. (d) All accessories prewired with suitable size copper conductor cable/strip including thimble/cable lugs with foundation of panel as required or recommended by manufacturer: Note :- 1. Panel shall be installed at least 60 cm above ground 2. All civil/electrical work & material is deemed to be included in the quoted rates 3. Drawing of Lt panel shall be got approved from GE. 4. panel shall confirm to IEC - 61439 updated to date. 5. All MCCB's shall be confirm to ICS=100% of ICU.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sqmm 3.5 core complete all as specified and directed.

M&L Earthing complete as per electrical plate No 5 of MES SSR Part I with galvanised steel plate earth electrode 60 cm x 60 cm x 6.0 mm, burried directly vertically in ground in a pit of depth not less than 2.5 metres below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and including galvanised iron or steel earth strip 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel. Earthing strip protected by galvanised iron or steel pipe 50 mm bore medium grade and connected to continuous earth wire on pole/ test point. Watering pipe shall be 20mm bore GI medium grade. The earthing shall be inclusive of excavation and earth work in any type of soil, charcoal, salt, funnel , PCC pit and RCC cover complete all as specified & directed by Engr-in-Charge and if earthing value is more than 4 Û (ohm) new earthing shall be done at not extra cost.

M & L Galvanised iron strip 25 x4 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

M & L for GI Tubing light grade 50mm dia fixed on walls ceiling or laid in floor complete with all fixing material such as clamp, fastner ,nuts bolts and washer complete for machnical protection of GI strip.

ANIKET TRADERS (BID ID -3489117)

KARAN TRADERS (BID ID -3496356)